Owner`s manual

19
Use the number keys
(“0” to “9”) to input the
title number.
Note: Press “RETURN” during this process to
return to the previous mode.
123
456
789
0
Press “ENTER”.
The chapter input mode is set.
Use the number keys
(“0” to “9”) to input the
chapter number.
ENTER
Number of chapter number allowed to input.
(In this case the chapter number can be
selected between 1-34.)
123
456
789
0
Press “ENTER”.
The program input mode is
ended. To continue programming,
press “ 9 ” to change the program
number, then repeat steps 2 to 5.
Up to 20 titles, chapters and
tracks can be programmed.
ENTER
Note: If you want to program more than 10 titles,
chapters and tracks, press “
9 ” after
programming the 10
th
step to select “NEXT”,
then press “ENTER”. The program menu for
step numbers 11 to 20 appears.
Press “ : ”.
Playback begins in the pro-
grammed order.
Note: If “PROG” is pressed after inputting the
program, the program menu turns off, but
the program is stored in the memory.
Notes:
• For video CDs and CDs, input the track numbers
(in the same way as for DVDs).
• For DVDs, the program menu reappears once
programmed playback is finished. For video CDs
and CDs, the program is played repeatedly.
• The program can be checked during programmed
playback by pressing “DISP” twice. For details,
refer to “Displaying the disc status” (pages 24 and
25).
Programmed playback