Owner`s manual

21
Press “ENTER”.
The chapter number is selected.
Input the new chapter number,
then press “ENTER”.
To continue editing, use the “ 8 ”
and “ 9 ” keys to select the number
of the step you want to edit, then
repeat steps 3 and 4.
or
ENTER
Press “ : ”.
Programmed playback begins.
Note: For video CDs and CDs, edit the track
numbers (in the same way as for DVDs).
Clearing steps from programs
During programmed
playback, press “
L ”.
The program menu appears.
Use the “ 8 ” or “ 9 ” key to select
the number of the step you want
to clear.
Press “CLEAR”.
The step is cleared from the
program.
or
Notes:
• Clear one step from the program at a time.
• When a step is cleared, the numbers of the
following steps are all decreased by one.
• To clear the entire program, set the cursor to step
1 and press “CLEAR” repeatedly.
CLEAR
Press “PROG”.
The program menu turns off.
PROG
Editing programs and clearing steps from programs