Owner`s manual

31
SET UP
SET UP
Use the “ 8 ” or “ 9 ” key to select
the rating level, then press
“ENTER”.
Select “OFF” to cancel the parental lock
or if you do not want to set a rating level.
The higher the number, the higher the
rating level.
ENTER
or
Note: Press “RETURN” to return to the previous
screen.
Press “SET UP”.
The settings are stored and the
set up mode is canceled.
Notes:
• If you want to change the password, select
“CHANGE PWD”, then input the new password
(4 digits).
• Write down the password on a piece of paper and
store the piece of paper somewhere in case you
forget it.
• On unrated DVDs, playback will not be restricted
even if the rating level is set.
• Once set, this rating level remains in memory
until changed. To enable the play of discs of
higher rating levels or to cancel the parental lock,
the setting must be changed.
• Not all DVDs provide a Parental Lock feature. If
you are unsure about a DVD, play it first to
confirm. Do not leave DVDs accessible to young
children for whom you deem them inappropriate.
.
SET UP
• Changing the rating level temporarily
Some discs may request that you change the
rating level set in the default settings during
playback. In this case, the following message
appears on the screen:
Still picture
When this appears, if you do not input the correct
password either playback does not continue or a
picture for a different rating level is played.
Setting the rating level (parental lock)
Still Picture
Tips