Owner`s manual

33
SET UP
SET UP
• Audio output/Optical digital audio output
Changing the digital output setting
Changing the display setting
DVD
Video CD
CD
Dolby Digital
Linear PCM (48 kHz)
Linear PCM (96 kHz)
MPEG
Linear PCM
AUTO
LPCM
AUTO
LPCM
AUTO
LPCM
AUTO or LPCM
AUTO or LPCM
Disc
Audio recording
format
Digital output
setting
Optical digital audio output
(when a DVD sound
processor is connect)
Analog audio output
(Ai-NET output)
Dolby Digital
LPCM (48kHz)
LPCM (48kHz)
LPCM (48kHz)
x
x
LPCM (44.1kHz)
LPCM (44.1kHz)
\
\
\
\
\
\
\
\
Changing the display
setting
Use the following procedure to set whether or
not the product’s LED indicators are on or off.
Select “DISPLAY” under “Chang-
ing the default settings (SET
UP)” on page 26.
Use the “
8 ” or “ 9 ” key to select
the “ON” or “OFF”, then press
“ENTER”.
ENTER
or
ON
OFF
The LED indicators are lit, indicating the
product’s operating status. “ON” is selected
upon shipment from the factory.
The LED indicators are turned off.
When “OFF” is set, the indicators do not light
even when the power is on.
Note: Press “RETURN” to return to the previous
screen.
SET UP
Press “SET UP”.
The settings are stored and the
set up mode is canceled.