Owner`s manual

34
SET UP
Custom setting –
Changing the F scan setting
Use the following procedure to change the DVD
scan speed.
Custom setting – Changing the F scan setting
Select “CUSTOM SETUP” under
“Changing the default settings
(SET UP)” on page 26.
Use the “
8 ” or “ 9 ” key to select
“F SCAN MODE”, then press
“ENTER”.
ENTER
or
I FR
IP FR
Use the “ 8 ” or “ 9 ” key to select
“IP FR” or “I FR”, then press
“ENTER”.
ENTER
SET UP
RETURN
The DVD scan speed is slightly slower than
when “I FR” is selected.
“IP FR” is selected upon shipment from the
factory.
The DVD scan speed is slightly faster than
when “IP FR” is selected.
ENTER
or
SET UP
Note: Press “RETURN” to return to the previous
screen.
Press “SET UP”.
The settings are stored and the
set up mode is canceled.
RESET Switch