Owner's Manual

Using parking mode
When the product is connected to the vehicle via the hardwiring cable, the
operating mode is switched to parking mode after the engine or electrical
accessories are turned off and the voice guide will indicate that the parking mode
has started.
Refer to the following table to set the parking mode options.
Option Operation description
No motion
Monitors movement in the area or impacts to the vehicle .
or impact
Video will be recorded only when motion or an impact is
detected detected.
When a moving objects is detected while parking, a video is
Motion
Motion recorded for 20 seconds (from 1 0 seconds before detection
Detection
detected to 1 0 seconds after detection) and stored in the
"motion_timelapse_rec" folder.
When an impact is detected while parking, a video is
Impact
recorded for 20 seconds (from the moment 10 seconds
detected before detection to 1 0 seconds after detection) and stored
in the "parking _ rec" folder.
A videos is recorded at a rate of 2 fps for 1 0 minutes,
No impact
compressed into a 2-minute long file, and stored in the
"motion_timelapse_rec" folder. Since the video file
detected
recorded with this option is small, you can record a long
video.
Time
Lapse
When an impact is detected while parking, a video is
recorded for 100 seconds at a rate of 2 fps (from the
Impact moment 50 seconds before detection to 50 seconds after
detected detection) and stored in the "parking_rec" folder after
being compressed into a 20-second long file. (The buzzer
will sound.)
No impact Monitors impacts to the vehicle. Video will be recorded only
detected when an impact is detected.
Energy
Saving
Impact
When an impact is detected while parking, a video is
detected
recorded for 20 seconds (from within 1 second after
detection) and stored in the "parking _ rec" folder.
OFF
The product is powered off when electric accessories and
the engine are turned off.
16