Owner's Manual
Table Of Contents
- Installation Manual
- Introduction
- Note
- To Ensure Safe Use, Always Follow These Precautions
- Tools Possibly Required (This Will Vary Depending On The Vehicle)
- Accessory List
- Factory Unit Disassembly Process (2007-2010 Only)
- Factory Unit Disassembly Process (2011-2018 Only)
- Glove Box Removal
- Removing B-Pillar Panel
- Removing Rear Right Side Panel
- Spare Tire and Wheel Removal
- Camera & Light Extension Cable Installation
- Bracket Installation
- Wiring Diagram: OEM Head Unit With SGS-CH01 (Sold Seperately)
- Wiring Diagram: OEM Head Unit With ALP-HRN-CAMCH (Sold Seperately)
- Wiring Diagram: Alpine Head Unit Using Direct Connection
- Wiring Diagram: Alpine Head Unit With SGS-CH01 (Sold Separately)
- Wiring Diagram: OEM Head Unit With SGS-CH01 & KCX-C2600B (Sold Separately)
- Wiring Diagram: OEM Head Unit With ALP-HRN-CAMCH & KCX-C2600B (Sold Separately)
- Troubleshooting
- Quick Installation Manual
Jeep Wrangler
HCE-RCAM-WRA 11/16
Wiring Diagram: OEM Head Unit With ALP-HRN-CAMCH (Sold Seperately)
Factory Head Unit
To Factory
Camera Connector
To Rear
Camera Input
HCE-RCAM-WRA
Camera Extension Cable
Power & Video
Unit
Red
NOTE:
The OEM radio will need to be
ashed by a Jeep dealer
to enable the rear camera
feature when using the
ALP-HRN-CAMCH
Black
To chassis ground
ALP-HRN-CAMCH
(Sold Seperately)
To White/Gray
+12V reverse wire in the
passenger kick panel










