Owner's Manual
Table Of Contents
- Installation Manual
- Introduction
- Note
- To Ensure Safe Use, Always Follow These Precautions
- Tools Possibly Required (This Will Vary Depending On The Vehicle)
- Accessory List
- Factory Unit Disassembly Process (2007-2010 Only)
- Factory Unit Disassembly Process (2011-2018 Only)
- Glove Box Removal
- Removing B-Pillar Panel
- Removing Rear Right Side Panel
- Spare Tire and Wheel Removal
- Camera & Light Extension Cable Installation
- Bracket Installation
- Wiring Diagram: OEM Head Unit With SGS-CH01 (Sold Seperately)
- Wiring Diagram: OEM Head Unit With ALP-HRN-CAMCH (Sold Seperately)
- Wiring Diagram: Alpine Head Unit Using Direct Connection
- Wiring Diagram: Alpine Head Unit With SGS-CH01 (Sold Separately)
- Wiring Diagram: OEM Head Unit With SGS-CH01 & KCX-C2600B (Sold Separately)
- Wiring Diagram: OEM Head Unit With ALP-HRN-CAMCH & KCX-C2600B (Sold Separately)
- Troubleshooting
- Quick Installation Manual
Jeep Wrangler
HCE-RCAM-WRA 13/16
Wiring Diagram: Alpine Head Unit With SGS-CH01 (Sold Separately)
To Factory Main
Harness Connector
To Factory Harness
To SGS-CH01
Main Connector
IN OUT
SGS-CH01
(Sold Seperately)
Direct Camera Adapter
(ships with head unit)
To Rear
Camera Input
CAM TRIG
Alpine Head Unit
(Sold Separately)
CAN I/F
GPS
USB
EXT. KEY W.REMOTE
POWER
SXM/DAB
PRE OUT
DISP. OUT
HDMI IN HDMI OUT
ANTENNA
Direct Camera
Input
Not Used
HCE-RCAM-WRA
Camera Extension Cable
Ground And
Accessory Can
Be Used To Power
Aftermarket Camera.
See Page 8 of the
SGS-CH01 manual
for wire colors and pins
of rear camera harness.
Please note to leave
enough space in case
the connector would
need to be soldered
back on.
Power & Video
Unit