Installation Manual

Spare Tire Camera & Light System for Jeep Wrangler
12/14
2 Using M4 hex key, assemble the lug nut camera
base, mounting post, mounting base with the
harness running along the cutout and inside the
post.
Lug nut
camera base
Mounting
post
Mounting
base
3 Position the mounting base assembly over the
factory lug nuts. Ensure that no wires are pinched
or interfered with any parts or safety equipment.
4 Mount the spare tire back on the hub. Make sure the
mount is aligned correctly and connector coming
out of the center cap hole. Secure the spare tire by
tightening all lug nuts.
Description
Torque Spec.
(ft-lbs)
Spare Tire Carrier Lug Nut
(Aluminum Wheel)
54
Spare Tire Carrier Lug Nut (Steel
Wheel)
72
336034 HCE-TCAM1-WRA_IM_r5.indd 12336034 HCE-TCAM1-WRA_IM_r5.indd 12 7/20/16 4:02 PM7/20/16 4:02 PM