Installation Manual

Spare Tire Camera & Light System for Jeep Wrangler
 13/14
5 Connect the Spare Tire Camera and Light unit.
Do not drop Spare Tire Camera & Light unit on
hard surface. Doing so could damage the unit.
Place fl oor mat or carpet on the ground
underneath the camera to protect Spare Tire
Camera & Light unit from dropping.
6 Press the connector into the slot. Use the rubber
clips on the unit to secure the cable.
7 Using wheel lock, tighten the Spare Tire Camera
and Light unit on the mount. Use threads on the unit
to adjust horizontal angle of the camera.
Recommend
to use wheel
lock to add
protection.
We recommend using a wheel lock to protect your
investment.
Description Torque Spec.
(ft-lbs)
Spare Tire Camera and Light
Wheel Lock Lug Nut
14
Completed Installation Image
1 Reinstall all panels, covers, carpets, cigarette lighter
socket, and glove box as it was taken out.
2 Reinstall the ground battery cable to the
battery negative post and torque the nut to the
manufacturer’s specifi cation. Reinstall the metal
brace.
Final Clean-Up
1 Clean up the interior of the vehicle so there are no
materials, metal shavings, wire pieces, debris left in
the vehicle.
2 Make a fi nal vehicle inspection to ensure everything
has been properly installed and reconnected to the
manufacturer’s specifi cations.
336034 HCE-TCAM1-WRA_IM_r5.indd 13336034 HCE-TCAM1-WRA_IM_r5.indd 13 7/20/16 4:02 PM7/20/16 4:02 PM