Installation Manual

Spare Tire Camera & Light System for Jeep Wrangler
6/14
Spare Tire Camera and Light Installation
Glove Box Removal
1 Open the glove box.
2 Push inwards both left and right sides to release the
glove box out.
Removing B-Pillar Panel
1 Remove B-Pillar panel by disengaging 4 clips on
both front and rear passenger sides.
2 Using panel removing tool, unclip the B-Pillar. Be
careful not to damage the panel.
3 Lift the carpet up on both front and rear passenger
sides to expose the OEM cables.
336034 HCE-TCAM1-WRA_IM_r5.indd 6336034 HCE-TCAM1-WRA_IM_r5.indd 6 7/20/16 4:02 PM7/20/16 4:02 PM