Installation Manual

Spare Tire Camera & Light System for Jeep Wrangler
7/14
Spare Tire Camera and Light Installation
Removing Rear Right Side Panel
1 Using T25 Torx, remove the screws on the rear right
side panel.
2 Using panel removing tools, pry off seatbelt
cover[#1] and remove the roll cage cover[#2].
2
1
3 Using 10mm socket to remove the panel.
4 Unclip the cigarette lighter socket from the harness.
5 Remove the Rear Right Side Panel.
336034 HCE-TCAM1-WRA_IM_r5.indd 7336034 HCE-TCAM1-WRA_IM_r5.indd 7 7/20/16 4:02 PM7/20/16 4:02 PM