User Manual

9-EN
Turning the System On
With the Alpine system, when the ignition key is turned to ACC or ON,
the opening screen will be automatically displayed.
1 When the system is used for the first time, the
language selection menu is displayed. There are 20
languages to choose from. Touch the screen and
slide your finger up or down, and then touch the
desired language.
2 Touch [OK].
The radio screen is displayed.
• When you turn on this unit for the first time, the demo mode starts
automatically, and the demonstration screens are displayed one after
another. To turn off the Demo mode, refer to “Demonstration Setup”
(page 21).
• Some of this unit’s functions cannot be performed while the vehicle is
in motion. Be sure to stop your vehicle in a safe location and apply
the parking brake before attempting these operations.
Adjusting the Volume
Adjust the volume by pressing + or -.
Volume increases/decreases continuously by pressing and
holding + or -.
Volume: 0-35
Muting the Sound
Press to activate/deactivate the MUTE mode.
Operating an Item in a List
1 To scroll through a list, touch the screen and slide
your finger up or down.
The screen will scroll along with your finger movement.
• To make a selection, touch the screen at the desired item, and
then lift your finger without moving the screen up or down.
2 Touch the button and slide your finger right or left to
change ON/OFF.
Using Siri
You can use the Siri function of your iPhone. To use Siri from this unit,
make sure that this function is enabled in your iPhone settings.
Press (Siri).