EN 9-INCH AUDIO/VIDEO RECEIVER i209 FR 7-INCH AUDIO/VIDEO RECEIVER iLX-207 • OWNER’S MANUAL Please read before using this equipment. • MODE D’EMPLOI Veuillez lire avant d’utiliser cet appareil. ES • MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. Thank you for purchasing this Alpine product. Please take a moment to protect your purchase by registering your product now at the following address: www.alpine-usa.com/registration.
Resistant to Dust and Fresh Water (i209 Only) IP53 rating Resistant to Dust and Fresh Water. Rated IP53 under IEC standard 60529. This product has been tested in a controlled, laboratory environment with an IP (Ingress Protection) rating of IP53 under IEC standard 60529, which is an international standard for measuring the level of protection from dust and fresh water.
ENGLISH Contents Operating Instructions PRECAUTIONS IMPORTANT INFORMATION ........................ 8 WARNING Points to Observe for Safe Usage ........................ 8 WARNING ...................................................... 8 CAUTION ..................................................... 10 NOTICE ........................................................ 10 Features Favorite Function ................................................ 12 About Swiping the Touch Screen ......................
Volume Setting ................................................ 36 Setting Audio Mute On/Off while Backing up ................................................................... 36 Setting the Microphone Effect ....................... 36 Default Sound Settings ................................... 36 About the Crossover ........................................... 36 About Time Correction ...................................... 37 Picture Quality Setup ..........................................
Selecting the Receivable Program Type (RBDS FM Radio mode only) ..................................... 53 Forced Analog Mode .......................................... 53 Displaying Radio Text (RBDS FM Radio mode only) .................................................................. 53 Using Ballgame Mode (HD Radio™ Mode only) .................................................................. 54 About the Feature Logos .................................... 54 USB Flash drive (Optional) Playback ...........
Stopping Playback ............................................. 73 Fast-forwarding/Fast-reversing ...................... 73 Finding the Beginnings of Chapters/Tracks/ Files .................................................................. 73 Forward/Reverse frame-by-frame Playback .......................................................... 74 Repeat Playback ................................................. 74 Searching by Title Number ...............................
In Case of Difficulty ............................................ 95 If this Message Appears ...................................... 96 Specifications .......................................................
Operating Instructions PRECAUTIONS IMPORTANT INFORMATION FCC COMPLIANCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide more reasonable protection against harmful interference in a residential installation, and are more stringent than “outdoor” requirements.
MINIMIZE DISPLAY VIEWING WHILE DRIVING. Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident. DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT. Doing so may obstruct forward vision or hamper movement etc. and results in serious accident. DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
CAUTION This symbol means important instructions. Failure to heed them can result in injury or material property damage. NOTICE Product Cleaning Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic. HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Temperature Failure to do so may cause personal injury or damage to the product.
CAUTION Alpine accepts no responsibility for lost data, etc., even if data, etc., is lost while using this product. On Handling USB Flash drive • This unit can control a memory storage device that supports the USB Mass Storage Class (MSC) protocol. Playable audio file formats are MP3, WMA, AAC and FLAC. • USB Flash drive function is not guaranteed. Use USB flash drive according to the terms of agreement. Read the USB flash drive Owner’s Manual thoroughly.
Features The screen design used in the Owner’s Manual may differ from the actual screen. Favorite Function Frequently used functions can be easily recalled. For details, see “Favorite Function” (page 23). Favorite screen example • Frequently used functions and useful functions can be customized for your convenience. • You can register up to 54 functions. • You cannot register a function more than once.
Switching the Audio Sources Screen to a Dedicated Screen You can switch the Audio Sources screen to a dedicated screen by touching the icon on one of the four edges of the screen, or by swiping vertically or horizontally. For details on how to swipe the screen, see “Touch Screen Operation” (page 16). • The operation is not available when using Apple CarPlay. Shortcut Setup Screen (page 18) You can set the Sound Setup or Rear Seat Entertainment System.
Getting Started (NAV) button Recalls the connected smartphone’s map screen. Depending on the smartphone, this function may not available. Remote Sensor Location of Controls Point the remote control transmitter towards the remote sensor within a range of 2 meters. (Camera) button (i209 only) For iLX-207 Recalls the Camera screen. Controllable with Remote Control This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer.
Turning Power On or Off Initial System Start-Up Some of this unit’s functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake, before attempting these operations. Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc. 1 2 Turn the ignition key to the ACC or ON position. The system turns on.
Touch Screen Operation Switching Sources You can operate the system by using the touch panel on the screen. Press the • Be sure to touch the onscreen button lightly with the pad of your finger to avoid scratching the display. Switching sources using the Touch operation During audio/visual playback, press the (AUDIO) button repeatedly to switch to the desired source. Touch a button or list item on the screen lightly. • If you touch a button and there is no reaction, remove your finger.
Operating the Function Button on the Audio/ Video Main Screen Using the Function button on the Audio/Visual main screen. Touch [ About Basic Operation for List Screen Basic operations on the Setup list screen and the Search list screen. How to display on the list screen differs depending on the selected item. ] to change to the Function mode. HD Radio main screen example Function mode Swipe to the right or left to change to the Function mode. To close the Function mode, touch [ ].
About the Shortcut Setup Screen Displaying the Sound Setup screen, or the Shortcut Setup screen of the Rear Seat Entertainment System screen. Touch [ Sound Setup Function Tone Adjustment mode ] or swipe downward in the Audio source screen. The Sound Setup screen or the Rear Seat Entertainment System Setup Screen is displayed.
Adjusting Bass Level/Treble Level Bass Level and Treble Level can be set independently set for Front and Rear speakers by touching [Front] or [Rear]. Setting item: Bass / Treble Setting contents: -14 to +14 (Initial setting: 0) • When “BASS ENGINE SQ” is selected in the Shortcut Setup, this setting is disabled. • Adjustment cannot be performed when Defeat is set to “On.
Setup button About the Menu Screen Displays the Setup screen. (page 28) Phone button*2 Displays the Phone menu screen. (page 76) • Depending on the setting and connected devices, the displayed icons and orders may differ. Touch to display more icons such as [Notifications]*3, [Android Auto]*4, [Apple CarPlay]*5 and 6 [Vehicle Info]* . In the menu screen, you can select the audio source and perform various setups or operations on the unit. Press the MENU button. The menu screen is displayed.
About the Indicator Display Opening screen Customization The Indicator Bar at the bottom of the screen displays various types of information, like the current time. You can set a BMP image that is stored on a USB flash drive as the opening screen. This setting requires the following image format, folder name and file name.
How to Input Characters and Numbers (Keypad) The displayed screens and procedures may vary slightly depending on the function used, but the basic input method is the same. Input screen area. Cursor position alteration switch Cancel Keypad mode finishes. (Delete) Returns to the previous character and erases it. Touching here for more than 2 seconds will erase all input characters. Input number is confirmed.
Favorite Function Editing the Favorite Screen You cannot edit the Favorites screen while driving. Using the Favorite Function This unit enables you to recall functions easily by registering frequently used items such as the Audio source, the navigation search function, etc. to the Favorite screen. You can recall any of these items easily. 1 Press the Your vehicle must be parked with the ignition key in the ACC or ON position.
Audio/Visual [Radio]*1 / [USB/iPod] / [Factory Media (USB/iPod)]*2 / [HDMI/DVD] / [Pandora] / [Bluetooth Pandora] / [SiriusXM]*3 or [Factory SiriusXM]*2, 3 / [AUX]*4 / [Bluetooth Audio] / [Apple CarPlay]*5 / [Android Auto]*5 *1 You can choose the frequency from Preset 1 - 12, registered into each FM1/FM2/AM band of HD Radio™ or RBDS. *2 Not displayed when your car does not support the source or “Setting the Source Category” (page 48) is set to “Aftermarket.
Deleting Items When deleting a selected item 1 2 Touch the checkbox at the left of the item you want to delete and place a check ( ) in it. Touch [ ] (Delete). The selected item will be deleted. When deleting all items Touch [ ] (Delete All). All items are deleted.
Applying Alpine TuneIt App This unit’s sound tuning is programmable from a connected Smartphone. It is also possible to download specific parameters for certain vehicles from Alpine’s TuneIt database stored in the Cloud. Using the Alpine TuneIt App, customized parameters can also be uploaded for others to share and rate. Through this unit, it is also possible to receive and respond to information from Alpine’s Social Network Service (SNS) available through the connected Smartphone.
Displaying Facebook Screen During Notification incoming or Notification List screen, you can switch to Facebook screen. Facebook screen example Message content Poster’s photo Close button: Close the Facebook screen. Touch the poster’s picture and name to switch to the Facebook screen. The detailed information of Notification is displayed. • Touch [ ] (Back) to return to Notifications List screen. • Depending on the status, contents of message and photo may not be displayed.
3 Setup Setting items: Wireless: See “Wireless (Bluetooth) Setup” (page 29). General: See “General Setup” (page 31). Source: See “Source Setup” (page 41). System: See “System Setup” (page 45). Setup Operation To display the Setup Menu screen: Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Release the parking brake.
Wireless (Bluetooth) Setup [Wireless] is selected on the Setup main screen in step 3. See “Setup Operation” (page 28). Bluetooth Setup [Bluetooth] is selected on the Wireless Setup Menu screen in step 1. See “Wireless (Bluetooth) Setup” (page 29). You can register and set up Bluetooth compatible devices.
2 Touch [ ] (Audio), [ ] (Hands-free) or [ ] (Both) of the device you want to connect from the list. Hands-free Device Primary/Secondary Setting Audio: Device is used as an Audio device. Hands-free: Device is used as a Hands Free Device. Both: Device is used as both an Audio device and Hands Free Device. Make sure the “Bluetooth” setting is “On” ( ). See “Bluetooth Setup” (page 29). When you connect two Hands-Free Phones, set the priority of the operation and the setting of incoming-outgoing calls.
3 Enter the passcode that you entered in step 2 again, and then touch [OK]. Changing the Character Code of the Phone Book You can select the character code that is used when transferring the phone book or history from a mobile phone. If unreadable characters appear in the transferred data, select the correct character code. General Setup [General] is selected on the setup main screen in step 3. See “Setup Operation” (page 28).
*1 You can make this setting in the Sound Setup screen of the Shortcut Setup. For details, see “Sound Setup Function” (page 18). *2 You can also make the setting in the Bal./Fad. screen. For details on how to adjust, see “Setting the Balance/Fader/Rear Speaker/Subwoofer” (page 32). *3 This setting is only available when “Subwoofer” is set to “On” ( ). *4 When the Defeat setting is “On,” you cannot perform the set up. *5 When “BASS ENGINE SQ” is selected in the Shortcut Setup, this setting is disabled.
Setting the Media Xpander (MX HD) Media Xpander (MX HD) makes vocals or instruments sound distinct regardless of the music source. The HD-Radio Technology (FM)/ SiriusXM, USB Flash drive and iPod/iPhone, will be able to reproduce the music clearly even in cars with a lot of road noise. Setting item: MX HD • When the Defeat setting is “On,” you cannot perform the set up. • When “BASS ENGINE SQ” is selected in the Shortcut Setup, this setting is disabled.
Adjusting the Frequency Touch [ ] or [ ] of “Frequency” to adjust the frequency of the selected band. Adjustable frequency bands: 20 Hz to 20 kHz (in 1/3 octave steps) Band1: Band2: Band3: Band4: Band5: Band6: Band7: Band8: Band9: 20 Hz~100 Hz (63 Hz) 63 Hz~315 Hz (125 Hz) 125 Hz~500 Hz (250 Hz) 250 Hz~1 kHz (500 Hz) 500 Hz~2 kHz (1 kHz) 1 kHz~4 kHz (2 kHz) 2 kHz~7.2 kHz (4 kHz) 5.
Adjusting the Time Correction (TCR) Before performing the following procedures, see “About Time Correction” (page 37). Setting item: Time Correction Setting the Volume for Each Source Setting item: Source Volume Setup Radio / SiriusXM / Compressed Media*1 / iPod Music / AUX*2 / HDMI*2, 3 / Bluetooth Audio / Factory Audio*4 / Apple Carplay*5 / Android Auto*5 Setting contents*6: -14 to +14 (Initial setting: 0) *1 Compressed Media is the music data in a USB flash drive (MP3/ WMA/AAC/FLAC).
Adjusting the Ring Tone Level About the Crossover You can adjust the receive volume, during the call. Setting item: Ring Tone Level Setting contents: 1 to 6 (Initial setting: 3) Volume Setting You can change the volume of the sound heard when a button is touched. Setting item: Key Sound Feedback Setting contents: 0 to 6 (Initial setting: 3) Crossover (X-Over): This unit is equipped with an active crossover. The crossover limits the frequencies delivered to the outputs.
About Time Correction Example 2. Listening Position: All Seats Adjust the time correction level of each speaker to almost the same level. The distance between the listener and the speakers in a car vary widely due to the complex speaker placement. This difference in the distances from the speakers to the listener creates a shift in the sounds image and frequency characteristics. This is caused by the time delay between the sound reaching the listener’s right versus the left ear.
Picture Quality Setup [Picture Quality] is selected on the General Setup Menu screen in step 1. See “General Setup” (page 31). You can set up items related to an image. Adjusting Tint of Picture Setting item: Tint Setting content: R15 to G15 (Initial setting: 0) Adjust the Color from R15 to G15. Adjusting Image Contrast Setting item: Contrast Setting content: -15 to +15 (Initial setting: 0) You can adjust the contrast between MIN (-15) and MAX (+15).
Display/Key Setup [Display/Key] is selected on the General Setup Menu screen in step 2. See “General Setup” (page 31). You can set up the brightness, color, display, etc., of the screen. Adjusting the Minimum Level of Backlight You can adjust the brightness of the backlight. This function could be used, for instance, to change the screen brightness while traveling at night.
General Setup [General] is selected on the General Setup Menu screen in step 1. See “General Setup” (page 31). You can set up items related to the language, etc. Setting the Time Setting item: Time Adjust Additional items: Hour / Minute Setting content: AM12 - PM12 or 0-23 / 0-59 Hour: Minute: Adjust the hour. Adjust the minute. • Cannot be adjusted while no GPS signal is received.
Vehicle Setup [Vehicle] is selected on the General Setup Menu screen in step 1. See “General Setup” (page 31). Source Setup [Source] is selected on the Setup main screen in step 3. See “Setup Operation” (page 28). Source Setup Menu screen Steering wheel Setting Set this item when an iPhone 5 or later/Android smartphone with Android Auto App is connected. This setting influences Apple CarPlay/Android Auto mode.
Radio Setup [Radio] is selected on the Source Setup Menu screen in step 1. See “Source Setup” (page 41). Setting the Alert individually for an Artist/ Song/Favorite Team This menu option allows you to enable the Artist/Song/Team alert for individual Artists/Songs/Teams (On or Off) or to delete individual stored Artist/Song/Team alerts (Delete). Setting item: Alert Setup Setting the TUNER (FM) Tone Quality (Tuner Condition) This unit can set your preferred tone quality for FM radio source.
Setting the Favorite Sports Team Alerts This menu option allows you to select your favorite teams, organized by leagues, so that you will be alerted later when your favorite teams are playing on other channels. Once selected, you will be alerted when games that those teams are playing in can be heard on a SiriusXM channel. Setting item: Favorite Team Setup Setting contents: On / Off 2 Touch the numeric keypad to input a 4-digit passcode. 3 Touch [Enter].
AUX Setup HDMI Setup [AUX] is selected on the Source Setup Menu screen in step 1. See “Source Setup” (page 41). You can set up the items related to the Auxiliary device. [HDMI] is selected on the Source Setup Menu screen in step 1. See “Source Setup” (page 41). You can set the name of an external device connected via HDMI. Setting item: AUX Setting contents: Off / On (Initial setting) Setting item: HDMI Setting contents: HDMI (HDMI 1*) (Initial setting) / DVD Off: On: AUX source is not displayed.
System Setup [System] is selected on the Setup main screen in step 3. See “Setup Operation” (page 28). Camera Setup [Camera] is selected on the System Setup Menu screen in step 1. See “System Setup” (page 45). You can set up items related to the Camera.
Multi View compatible Front Camera/Rear Camera 2 Front Camera screen example Touch [Back], [Panorama], [Corner], or [Top]. The view will change to the selected view. • [Back] will not appear for the Front camera. • For an explanation of video patterns, see the camera Owner’s Manual. Adjusting the Rear/Front/Side Camera Guide You can adjust the camera guide position. Setting item: Guide Adjustment 1 Side Camera screen example Touch [Guide Adjustment]. The camera guide adjustment screen is displayed.
When Hitch Guide is set to On Setting Multi Camera to On/Off When connecting the optional Multi Camera Interface module, you can connect up to 3 cameras as Front Camera/Rear Camera/Side Camera. • When using the optional Multi Camera Interface module, select “Camera Selector” to set the “Front Camera /Rear Camera/Side Camera” to “On” ( )/“Off ” ( ). 1 Touch [Link]. The 2 vertical guides of the currently-selected guide link together, allowing them to be adjusted simultaneously.
Setting the Source Category You can set whether the following source icon in the Menu screen is available. Setting item: USB/iPod (Initial setting: Both) / SiriusXM (Initial setting: Aftermarket) Setting contents: Both / Factory / Aftermarket Both*: Factory: Aftermarket: Rear Seat Entertainment Setup [Rear Seat Entertainment] is selected on the System Setup Menu screen in step 1. See “System Setup” (page 45). Both the sources listed above from this unit and iDataLink module are available.
External Accessories Setup Smartphone Apps Setup [External Accessories] is selected on the System Setup Menu screen in step 1. See “System Setup” (page 45). [Smartphone Apps] is selected on the System Setup Menu screen in step 1. See “System Setup” (page 45). Set Alpine TuneIt App to USB (iPhone) when an iPhone is connected, or set to Bluetooth (Android) when an Android Smartphone is paired. Setting the External Audio Processor When using an external audio processor, set to “On” ( ).
Apple CarPlay (Optional) Apple CarPlay is a smarter, safer way to use your iPhone in the car. Apple CarPlay takes the things you want to do with your iPhone while driving and puts them right on the unit. You can get directions, make calls, send and receive messages, and listen to music, all in a way that allows you to stay focused on the road. Just plug in your iPhone to the unit and go.
Radio/HD Radio™/ RBDS The unit can receive HD Radio broadcasting signals based on digital radio broadcast standards, in addition to analog radio broadcasts using RBDS. HD Radio broadcasting signals are broadcast in the service areas of the current AM/ FM broadcasters where they provide digital audio distribution and data services. This unit receives the above digital broadcasts for your high-quality sound enjoyment.
Radio Basic Operation Listening to the Radio 1 2 3 4 5 (AUDIO) button to select radio mode. Press the The display shows the radio mode screen. • You can select and change the source from the Menu screen (page 20) or the Favorite screen (page 23). Touch [ Presetting Stations Manually 1 2 3 ]. ]. Repeat the procedure to store up to 11 other stations onto the same band. To use this procedure for other bands, simply select the desired band and repeat the procedure.
Inputting Frequency Directly and Receiving the Radio Station Selecting the Receivable Program Type (RBDS FM Radio mode only) You can input a frequency of the same band directly and receive the radio station. You can select and receive the currently receivable stations in the Program Type list screen. 1 Touch [ 2 Touch a desired number. ] (Direct Tune). Program Type list screen example The numeric keypad input mode screen appears.
Using Ballgame Mode (HD Radio™ Mode only) In live broadcast, such as sportscasts, etc., a time lag occurs between digital sound and analog sound. Therefore, when live broadcasts are received, a time lag between the real broadcast may occur and the unit can change to analog broadcasting automatically. Touch [ ] (Live) to switch On/Off. LIVE Indicator The LIVE Indicator is displayed when Ballgame Mode is set to “On.
USB Flash drive (Optional) USB Video main screen example You can play back music files (MP3/WMA/AAC/FLAC) and video files (AVI/MKV/MP4) stored in a USB flash drive on the internal player of this system. WARNING It is dangerous for the driver to watch video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur. Install the unit correctly so that the driver cannot watch a video unless the car is stopped and the parking brake is applied.
Playback 1 2 Stopping Playback (USB Video only) (AUDIO) button to select USB mode. Press the The display shows the USB mode screen. • You can select and change the source in the Menu screen (page 20) or Favorite screen (page 23). Touch [ ] or [ ]. Advancing to the beginning of the next track (file) : Touch [ ]. Fast forward : Touch and hold [ • The 3 , “STOP” indicator is displayed, and playback stops. • Playback starts from the beginning when [ playback is stopped.
Full Search mode 1 2 Touch [Audio] or [Video] to switch whether the search list displays music files or video files. Touch your desired Folder name*2 or File name. When you select a File name, the selected song is played. When you select a Folder name, repeat the same procedure to select another Folder name or File name. *2 When you touch the [ ] by a Folder name, the unit plays from the first song in the Folder.
iPod/iPhone (Optional) A separately sold Lightning to USB cable (KCU-471i), etc., is required. When the unit is connected by the above cable, the controls on the iPod are disabled. • This unit does not support video playback from iPod/iPhone which connected to this unit via USB Connector. • Internet or telephone functions, etc., of the iPhone or iPod touch are not controllable from the unit, but these functions can be controlled using the iPhone or iPod touch itself.
Quick Search Mode Playback 1 Press the 2 Touch [ (AUDIO) button to select iPod mode. The display shows the iPod mode screen. • You can select and change the source in the Menu screen (page 20) or Favorite screen (page 23). ] or [ ] or to select the desired track (file). Returning to the beginning of the current (or previous) track (file): Touch [ ]. Fast reverse the current track : Touch and hold [ ]. Advancing to the beginning of the next track (file) : Touch [ ].
Alphabet Search Function Repeat Play The unit is provided with an alphabet search function for effective searching. When you use this function in the search mode, you can quickly search an artist or a song, etc. This is an example of how to search Artist Name for names beginning with “R”. Touch [ 1 Touch “O-U” of the alphabet group. ] to repeatedly play back the currently track. The tracks (files) will be played repeatedly. Touch [ ] again to deactivate Repeat play.
Pandora® internet radio (optional) Function mode Pandora® internet radio is your own FREE personalized radio now available to stream music on your Smartphone (which runs Android OS or iOS). Just start with the name of one of your favorite artists, songs or classical composers and Pandora® will create a “station” that plays their music and more music like it.
“Thumbs” Feedback Creating a New Station You can personalize your stations with “Thumbs Up” or “Thumbs Down” feedback, which the system takes into account for future music selections. Basing on the currently playing song or artist, a personalized Pandora station can be created. The new station will play more music like it. During playback, touch [ ] for thumbs up, or touch [ ] for thumbs down. : : The “ ” indicator appears in the display. Pandora® will add similar music to your station.
Connecting a Bluetooth Device (Bluetooth Pandora® Only) Registering a Bluetooth device in the unit enables automatic connection. If it does not connect automatically, run through the connection procedure again. 1 Touch [ 2 Touch [Reconnect]. ] (Settings). The Device Setting select pop up screen is displayed. Bluetooth connection will start. Disconnecting the Bluetooth Connection 1 Touch [ 2 Touch [Disconnect]. ] (Settings). The Device Setting select pop up screen is displayed.
SiriusXM Satellite Radio Operation (Optional) SiriusXM Tuner operation: When an optional SiriusXM Tuner is connected to this unit, the following operations may be performed. SiriusXM main screen example (Song Info. Mode) < During Replay mode > Signal Indicator Indicates the signal strength of SiriusXM. Info area Channel Info. Mode*: Channel No/Long Channel Name/Category Name Song Info.
Receiving Channels with the SiriusXM Tuner 3 Select the desired channel. About SiriusXM Satellite Radio Changing the Display Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com.
1 SmartFavorites Functions SmartFavorites allow you to rewind and replay any missed programming from your current Band of Preset channels. Miss a music, news, talk or sports segment? No Problem, because you can rewind and replay when you tune to one of your SmartFavorites channels and hear what you missed. Note that buffering starts 5 seconds after changing the band. It takes 5 seconds for SmartFavorites to start buffering the preset channels in the new band.
Searching by My Music 2 Touch [My Music]*. Touch the desired artist/song. The channel of the selected artist/song being broadcast is received. Searching by My Games 2 Touch [My Games]*. When the sports teams that you have stored are currently playing a game that is being broadcast, they will be displayed in a list. * Displayed only when the game of stored team is broadcasting. 3 Touch the desired team. The channel of the selected game being broadcast is received.
Replay Function Using Jump Memory and Jump Recall function In SiriusXM mode, you can pause, rewind and replay live Satellite Radio. The Jump Channel is a special channel that you can jump to with the press of a dedicated button and then jump back to the previous channel. This channel is often used to select your favorite SiriusXM traffic and weather report channel.
HDMI Device (Optional) Devices supporting HDMI can connect and play back through this unit (for example, an optional DVE-5300 (DVD Player), iPhone or other Smartphones). When making HDMI connections, you need to set HDMI on the unit suitable for the connected device. For details, see “HDMI Setup” (page 44). • The HDMI/MHL connecting cable differs depending on the connected device corresponding to HDMI. Prepare optional HDMI/MHL connecting cable sets suitable for your device.
Playback 1 MIX (Random Play) (AUDIO) button to select DVD (CD) mode. Press the The display shows the DVD (CD) mode screen. • You can also select and change from the Menu screen (page 20) or Favorite screen (page 23). Touch [ The MIX mode switches every time [ When a disc is inserted into the disc slot of the DVD Player, with the label side facing up, the unit starts playback of the disc. 2 Touch [ ] or [ MIX ] to select the desired track (file).
DVD Info mode DVD Video main screen example Current track no. Playback control (PBC)/Current audio status Elapsed time Function mode Disc types that can be used for each heading are represented by the following marks. DVD Commercial Video discs (used for the distribution of movies, etc.) or a DVD-R/DVDRW, DVD+R/DVD+RW recorded in a video mode can be used. Info mode Video-CD discs can be used. The DVD operation screen display Touch the screen while the DVD playback screen is displayed.
Playing a Disc If a Menu Screen Appears On DVD mode, menu screens may appear automatically. If this happens, perform the operation described below to start playback. WARNING It is dangerous for the driver to watch the DVD while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur. Install the unit correctly so that the driver cannot watch DVD unless the vehicle is stopped and the emergency brake is applied.
Numeric Keypad Input Operations 1 Touch [Key] again in the menu operation mode. 2 Touch a desired number. Stopping Playback Touch [ ] during playback. The numeric keypad input mode screen appears. “ ” indicator is displayed, and playback stops. • Playback starts from the beginning when [ playback is stopped. ] is touched while Fast-forwarding/Fast-reversing 1 Touch [ ] to delete an entered number. To delete all the numbers you have entered, touch [ least 2 seconds.
Forward/Reverse frame-by-frame Playback 1 2 Searching by Title Number Use this function to easily find positions on the DVD using the DVD’s titles. Perform operations while playback is stopped. In the pause mode, touch [ ] or [ ]. The picture advances by one frame each time the button is touched. Touch [ ] to return to normal mode. • No sound is output during forward frame-by-frame playback. • You can only execute reverse frame-by frame playback when playing DVD-V.
HDMI Operation Switching the Audio Tracks DVDs with multiple audio tracks or languages allow switching the sound during playback. Touch [ iPhone, Smartphone, etc. The output of your electronic device will be mirrored on this unit through the HDMI connector. Control from this unit is not possible. ] (Audio). The sound switches between the alternate audio tracks recorded on the disc every time the button is touched.
Bluetooth Operation Setup Before Using About Bluetooth Bluetooth is a wireless technology allowing communication between a mobile device or personal computer over short distances. This enables a hands-free call or data transmission between Bluetooth compatible devices. Bluetooth transmission is available in the unlicensed 2.4 GHz spectrum if the distance between devices is within 10 meters. For details, refer to the Bluetooth website (http://www.bluetooth.com/).
Answering a Call Call Waiting Function Incoming calls are announced by the received call ring tone and a displayed message (PHONE No., etc.). If a call comes in from another phone during a call, a notice is displayed on the screen. This function can only be used if the connected mobile phone has a call waiting function service included. 1 An incoming call triggers the ringtone and an incoming call display.
Second incoming call during a conversation in the Phone Operation screen • The display or operation may differ depending on the connected mobile phone or the caller’s mobile phone. Second incoming call notification screen 2 Touch the Short Cut icon. 3 Touch [Call]. A contact’s name, phone number, and a confirmation message of the phone number are displayed. The phone call is started. Making a phone call using the Phone Menu Making a phone call from the Recent Events list 1 Touch [ screen.
Entering a Phone Number to Make a Call 1 Touch [ 2 ] (Keypad). The number input screen (Keypad) appears. 3 Speak into the microphone supplied with this unit. • If no speech is detected, the unit may pause depending on version of the connected iPhone. In that case, touch the microphone icon [ ] in the center of the Voice Control mode screen. You can continue to use the Voice Control mode. To finish the Voice Control mode, touch [ VOICE button.
Adjusting the volume Adjust the speaker/microphone volume in Voice Dial mode. Perform the same procedure to adjust the speaker/microphone volume of handsfree phone. Phone Book Function Phone Book screen example Touch [ ] or [ ]. Adjust the speaker and microphone volumes. Stopping input to the microphone If the surrounding sound (road noise, etc.) is loud, you may wish to cut input to the microphone for 3 seconds. Touch [ ].
Deleting the Phone Book Entries Deleting One Entry from the Phone Book 1 2 Touch [ ] (Edit). Touch the checkbox [ ] of the contact name (or phone number) you want to delete. A tick ( ) appears in the checkbox. Bluetooth Audio If a Bluetooth compatible mobile phone, portable player, etc. is connected by wireless, you can play back a song (operation is controllable from the unit). • Operation may vary, depending on the Bluetooth compatible device.
Playback 1 Random Play (AUDIO) button to select Bluetooth Audio Press the mode. The display shows the Bluetooth Audio mode screen. • You can also select and change the source in the Menu screen (page 20) or the Favorite screen (page 23). 2 Touch [ ] or [ ] to select the desired track (file). Returning to the beginning of the current file: Touch [ Available for AVRCP Ver. 1.3, 1.4 and 1.5 only. 1 Touch [ 2 Select your desired Random Play mode. The selected Random Play mode changes the button.
Connecting a Bluetooth Device Registering a Bluetooth device in the unit enables automatic connection. If it does not connect automatically, run through the connection procedure again. 1 Touch [ 2 Touch [Reconnect]. ] (Settings). The Device Setting select pop up screen is displayed. Bluetooth connection will start. Disconnecting the Bluetooth Connection 1 Touch [ 2 Touch [Disconnect]. ] (Settings). The Device Setting select pop up screen is displayed. The Bluetooth connection is disconnected.
Auxiliary Device (Optional) Operating an AUX, AUX DVD or GAME Example for AUX, AUX DVD, GAME mode display Operating Auxiliary Devices (Optional) To operate devices connected to the AUX terminals of the unit, follow the procedure described below. • Set AUX to “On.” See “AUX Setup” (page 44). • Depending on the connected unit, the onscreen buttons may not work, or their operation may differ. • When the iDataLink module (sold separately) is connected, the Auxiliary (AUX) mode is not available.
[ ] Touch the switch to advance to the beginning of the next chapter/track/file. Touch and hold to fast forward. [ ] (Menu) Calls up the Menu screen. [ ] (Menu Control)* Calls up the menu operation mode. [ ] (Folder Down) Switches the program/playlist/folder down. [ ] (Folder Up) Switches the program/playlist/folder up. [ ] (Display Mode)* You can set the Display Mode. For details, see “Switching Display Modes (During Video File Play Back)” (page 57). [ ] (Angle) Switches angle.
Camera Operation (Optional) When an optional camera is connected, the view video of camera can be output to the monitor. Front camera, Rear camera or Side camera can be connected to this unit. Make the Camera Select setting (Front, Rear, Side or Other) according to your connected camera. For details, see “Setting the Camera Input” (page 45). When using the optional Multi Camera Interface module, you can connect up to 3 cameras: Front Camera, Rear Camera, and Side Camera.
2 Touch [Guide Off] or [Hitch Guide Off] on the Rear camera display screen. The guide disappears, and then the [Guide Off] or [Hitch Guide Off] switch changes to [Guide On] or [Hitch Guide On]. 3 Touch [Guide On] or [Hitch Guide On] to turn on the guide. Adjusting the Caution Display Location 1 Touch the screen when the image from the camera is displayed. The operation screen is displayed on the screen. • After a 5-second time-out, the operation screen returns to the camera display screen.
Actual distances Front Camera Operation Displaying the Front Camera image from the Menu screen. 1 Press the MENU button. The menu screen is displayed. Error Error The distance guidance mark represents the distance to a flat road surface. Therefore in the case of an upward slope behind the car, the distance guides are displayed closer to the rear bumper than the actual distance.
About the adjustment of guide display ON/ OFF setting and adjustment of Caution display location As with the rear camera, the front camera guide display ON/OFF setting and Caution display location can be adjusted. See “Guide Display ON/ OFF Setting” (page 86) and “Adjusting the Caution Display Location” (page 87) for the operations. Side Camera Operation Displaying the Side Camera image from the Menu screen. 1 Press the MENU button. The menu screen is displayed.
iDataLink Operation When the unit is connected to the car’s iDataLink module, you can transfer and receive data between the car and the unit to check the car’s status, or to make various operations from the unit. When you use iDataLink mode, set each setting other than “Aftermarket” in “Setting the Source Category” (page 48). 3 Adjust or confirm the item/information accordingly. • Operable functions and displays may differ depending on the vehicle.
Vehicle Information screen example Parking Sensor Camera interlock screen example (Rear camera) You can check for open doors, check the tire pressure, the battery life, etc. for the vehicle. You can check for obstacles through an interlocked camera image by connecting a Front or Rear Camera. Car Setting screen example (Generic List screen) • Touch the Camera image area to switch to the Camera full screen.
When changing the name: Touch the icon name, then input characters into Edit Name (Keypad). You can also select a basic name from the [Template] of the Keypad. For details on how to input characters using the keypad, see “How to Input Characters and Numbers (Keypad)” (page 22). (When a basic name is selected from the Template, the icon will be changed according to the basic name.) When changing the layout of the switches: Drag and drop an icon to the desired location.
Information Product Software Update This product use software that can be updated through a USB flash drive. Download the software from the Alpine website and update the product using the USB flash drive. Updating this product Check the Alpine website for details on updating. http://www.alpine-usa.com Important information on the software About the software license of the product The software installed in the product contains open-source software.
Corresponding File Systems Terminology This device supports FAT 16/32. The maximum nested folder depth is 8 (including the root directory). File names are limited to 256 characters (including the extension). Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and ‘_’ (underscore). Order of files Files are played back in the order that the writing software writes them to the disc. Therefore, the playback order may not be what’s expected.
In Case of Difficulty If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected, or then consult your authorized Alpine dealer. Basic No function or display. • Vehicle’s ignition is off.
If this Message Appears Various messages are displayed on the screen during operation. In addition to the messages telling you the current status or providing guidance for the next operation, there are also the following error messages. If one of these error messages is displayed, carefully follow the instructions in the solution column. System If you are driving, please pull over and park before using this function. • A setup operation, etc., was carried out while the vehicle was running.
Check Antenna • The SiriusXM Satellite Radio antenna or cable is either damaged or not connected correctly to the SiriusXM Tuner. - Check that the SiriusXM antenna cable is connected to the SiriusXM Tuner and check that the antenna cable is not kinked or otherwise damaged. Replace the antenna if necessary. - SiriusXM products are available at your local car audio retailer or online at www.shop.siriusxm.com. Applying Alpine TuneIt App You can not use Sound App Because External AP is on.
Bluetooth SECTION Specifications Bluetooth Specification Output Power Profile MONITOR SECTION Screen Size 9” (i209) 7” (iLX-207) LCD Type Transparent type TN LCD Operation System TFT active matrix Number of Picture Elements 1,152,000 pcs.
NOSE/CHASSIS SIZE i209 is sized exclusively for a certain car model.
LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. (“Alpine”), is dedicated to quality craftsmanship and is pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below. PRODUCTS COVERED: This Warranty covers Car Audio Products and Related Accessories (“the product”). Products purchased in the Canada are covered only in the Canada. Products purchased in the U.S.A.
About the Rules of Bluetooth Electromagnetic Radiation Regulation USA/Canada FCC/IC CAUTION This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
9-INCH AUDIO/VIDEO RECEIVER II Ill II i209 7-INCH AUDIO/VIDEO RECEIVER iLX-207 Made for ~ iPod Works with DiPhone pandora® • H)\ ~ Rad10 Apple CarPiay HIGH-DEFINITION MULTIMEDIA INTERFACE 0 Bluetooth® andtOiclauto (()) m.flac This HD Radio receiver enables: ® PSD) HD2/HD3) Digital Sound) Artist Experience) READY liC: 1 QUICK REFERENCE GUIDE GUIDE DE REFERENCE RAPIDE GUfA DE REFERENCIA RAPIDA Please register your product at www.alpine-usa.com/registration to protect your purchase.
Contents WARNING ................................................................................................................................................................2 CAUTION .................................................................................................................................................................3 Getting Started ..................................................................................................................................................
WARNING ~WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER CANNOT WATCH TVNIDEO UNLESS THE VEHICLE IS STOPPED AND THE EMERGENCY BRAKE IS APPLIED. It is dangerous for the driver to watch TV /Video while driving a vehicle. Installing this product incorrectly enables the driver to watch TV /Video while driving.
~CAUTION This symbol means important instructions. Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing. HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience.
Getting Started Location of Controls The screen design used in the Owner's Manual may differ from the actual screen. For iLX-207 For i209 CD (j) Microphone (ilX-207 only) Used for Hands-free or Voice Control modes. @ @ sources. @ +1- or A RESET switch The system of this unit is reset. for VOICE button Depending on the connected smartphone, press to recall Siri function or voice recognition mode. @ Press to seek down/up a station in radio mode or down/up a track, chapter, etc.
Turning Power On or Off 1 Turn the ignition key to the ACC or ON position. The system is turned on. 2 Press and hold the MENU button for at least 5 seconds to turn the power off. Switching the Audio Sources Screen to a Dedicated Screen You can switch the Audio Sources screen to a dedicated screen by touching the icon on one of the three edges of the screen, or by swiping vertically or horizontally. I You can set the Sound Setup or Rear Seat Entertainment System.
Favorite Function Favorite Function This unit enables you to recall functions easily by registering frequently used items such as the Audio source, the navigation search function, etc. to the Favorite screen. You can recall any of these items easily. 1 G) Press the* (Favorite) button. Changes to the Edit screen used for registering items or changing names. The Favorite screen is displayed. • • You cannot edit any items on the Edit Menu screen while driving.
Owner's •manual Android Auto (Optional) Android Auto (Optional) Android Auto is designed to make it easier to use apps from your phone while you're on the road. Navigate with Google Maps, listen to playlists or podcasts from your favorite apps, send messages via voice, and more. Download the Android Auto App from the Google Play store before continuing. 1 Press the MENU button. The Menu screen is displayed. 2 Touch [Android Auto]. The Android Auto screen is displayed.
Owner's manual Radio/HD RadioTM/RBDS HD Radio™/RBDS Operation Preset button Displays the preset stations with a short touch. Touch for at least 2 seconds to memorize the current station as a preset station. r---------------- Preset mode screen HD Radio indicator (HD Radio'M mode only) Multicast indicator (HD Radio'M mode only) Information display Increases frequency PTY Search button ---...1 Swipe to the right when you use the PTY list screen.
Owner's manual USB Flash drive Operation (Optional) USB Flash drive Operation (Optional) You can play back music files (MP3/WMNAAC/FLAC) and video files (AVI/MKV/MP4) stored in a USB Aash drive on the internal player of this system. I USB Audio main screen example Quick Search mode screen , . . . - - - - - - - - - - - - - - - - - - - - - - Quick Search button Touch or sw1pe to the right to use the QuiCk Search mode. ,,, Alpine r'-·· Current song no./Total song no. Alpme Best Alpine Me ... .,.
Owner's manual Pandora• Internet Radio Operation (Optional) Pandora®Internet Radio Operation {Optional) • iPhone Pandora main screen example , . . - - - - - - - - - - - - Bookmark Artist/Track Shuffle Play indicator Pandora information display Album Art - - - - - - - - Playing time "Thumbs Down" feedback Pause and Playback r---------- Creates a New Station from the ----------..
Owner's manual SiriusXM Satellite Radio Operation (Optional) SiriusXM Satellite Radio Operation (Optional) When an optional SiriusXM Tuner is connected to this unit, the following operations may be performed. Search mode button - - - - , Sw1pe to the right when you use the search mode screen. Preset mode screen Signal Indicator SiriusXM Satellite Radio information display Changes to next channel Expands function menu Preset button Swipe vertically in the list to change pages.
Owners manu.ll HDMI DVD HDMI Device (DVD Player) Operation When you connect an optional DVE-5300 (DVD Player), you can operate it from the unit. Restarts the current file/ skip to previous file if pushed within 1 second/ Touch for 1 second or more to rewind file r----::::-- Pause and Playback Stop Playback ----------.....1 ' - - - - - - - Displays Menu screen ---------- -----....
Owner's manual iPod/iPhone (Optional) iPod/iPhone Operation (Optional) A separately sold L ghtning to USB cable (KCU-471 i) is required depending on the type of iPod/iPhone. Audio mode . - - - - - - - - - - - - - - - - - - - - - - - Quick Search button Touch or sw1pe to the nght to use the QuiCk Search mode. Quick Search mode screen A lptne Song3 I Current song no./Total song no.
Owner's manual Bluetooth Setup, Bluetooth Operation Hands-Free Phone Control The unit can connect with up to two hands-free phones. If you connect two hands-free phones to the unit, select "Hands-free Device Priority" in "Biuetooth Setup" to set the order of precedence. For details, refer to OWNER'S MANUAL for more information. How to connect to a Bluetooth compatible device (Pairing) 1 Touch [Setup] button on the Menu screen. k;o.:~ C:,?ct"1 JS3f...b:J '') ... 87.7 ••t II ----" 001 m:>J 0.
Specifications MONITOR SECTION Bluetooth SECTION Screen Size Bluetooth Specification Output Power Profile 9"(i209) 7" (iLX-207) LCD Type Transparent type TN LCD Operation System TFT active matrix Number of Picture Elements 1,152,000 pes. (800 X 480 X 3 (RGB)) Effective Number of Picture Elements 99% or more Illumination System LED Bluetooth V2.1+EDR +4 dBm Ave.
Note on using HOM I Connection Cables NOSE/CHASSIS SIZE i209 is sized exclusively for a certain car model. When using HOM! connection cables, secure the cables to the (iLX-207) HOM! Terminals with the supplied HOM! Bracket. 1 Slide the HOM I Bracket into the grooves (A). 00 ....____ r---- ~ 2 E E Secure it with the screw (B). r---- ;! ...... 171 mm (6-3/4") HOM I Terminal 1 178 mm (7-1/8") 18 mm (23/32") 00 ....
• Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. • Apple, iPhone, iPod, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Apple CarPiay is a trademark of Apple Inc.
LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. ("Alpine"), is dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below. e PRODUCTS COVERED: This Warranty covers Car Audio Products and Related Accessories ("the product"). Products purchased in the Canada are covered only in the Canada. Products purchased in the U.S.A.
ALPINE ELECTRONICS MARKETING, INC. 1-7, Yukigaya-Otsukamachi, Ota-ku, Tokyo 145-0067, JAPAN Phone: 03-5499-4531 ALPINE ELECTRONICS OF U.K. LTD. Alpine House Fletchamstead Highway, Coventry CV4 9TW, U.K. www.alpine.co.uk ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS France S.A.R.L.
Jeep Wrangler i207-WRA 20201016v1 1/19 Jeep Wrangler i207-WRA Restyle Installation Manual Model: Wrangler Model Year: 2007-2017 Jeep Model Year Wrangler 2007-2017 * The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is not guaranteed if the manufacturer has made production changes to the listed vehicles above. Warning: Before you begin wiring, remove the ground wire from the negative terminal of the battery.
Jeep Wrangler i207-WRA Types of Precautions Forbidden Forbidden Indicates actions that are forbidden (must not be performed) Mandatory Indicates that disassembly is forbidden. 20201016v1 2/19 Indicates actions that are mandatory (must be performed) Marks content that should receive your full attention. Warning Do not disassemble or modify the product. Doing so could lead to an accident, fire, or electric shock.
Jeep Wrangler i207-WRA 20201016v1 3/19 When installing and grounding the product, do not use any of the bolts or nuts of the steering wheel, brakes, fuel tank, or the like. Doing so could make the brakes stop working or lead to fire. Forbidden Do not install the product near the passenger-side airbag. Doing so could interfere with the operation of the airbag and lead to an accident or injury. Forbidden Bundle cords so that they don’t interfere with driving.
Jeep Wrangler i207-WRA 20201016v1 4/19 Tools Required Panel Removing Tool 7mm Sockets #2 Phillips Screwdriver Wire Cutters Extension Ratchet Side Mounting Brackets Add-on Microphone T20 Torx Accessory List Installation Kit Parts Rear Support Bracket (only for 2011-2017)
Jeep Wrangler i207-WRA 20201016v1 5/19 Accessory List Head Unit Box Parts (i207-WRA) iLX-207 Head Unit Round Head Screws (4pcs) Flat Head Screws (4pcs Not Used) AUX/Pre Out Harness GPS Antenna & Wire Hooks Documents OM QR Card Alpine Registration Card Direct Camera Adapter Source Unit HDMI Bracket Installation Manual USB Extension Cable iDatalink Maestro Box Parts (ALP-MRR4/ALP-HRN-WRA3) Maestro Flashing Cable FM/AM Antenna Adapter Main Harness SiriusXM Radio Antenna Adapter (only for vehi
Jeep Wrangler i207-WRA 20201016v1 6/19 Programming the iDatalink Maestro Module 1 INSTALL THE WEBLINK PLUG-IN Go to: idatalinkmaestro.com/plugin and follow the installation steps. The Maestro module must be programmed specifically for each vehicle and radio. Take care to enter the correct vehicle information, factory options, head unit model, and head unit serial number. The head units serial number is a 9 character alphanumeric value which is found on the head units label, underneath the bar code.
Jeep Wrangler i207-WRA 20201016v1 7/19 Component Locations IMPORTANT: Follow the recommended component location shown below. Failure to do so, will result in poor GPS performance. Add-on Microphone iDatalink Maestro Module SiriusXM Tuner (Sold Separately) Jeep SINCE 1941 Jeep GPS Antenna Installation IMPORTANT: Follow the GPS antenna installation procedure shown below. Failure to do so will result in poor GPS performance for CarPlay and Android Auto.
Jeep Wrangler i207-WRA 20201016v1 8/19 Factory Unit Disassembly Process (2007-2010 Only) 1 DISCONNECT THE BATTERY BEFORE CONTINUING. FAILURE TO DO SO WILL DISABLE MANY FEATURES. Remove top by releasing 2 rear clips on the back of the top panel and then pull panel forward. 3 Release 2 clips on the top of the bottom panel. This will expose two 7mm screws. Remove using a 7mm socket with ratchet & extension. 5 Extract (4) 7 mm screws and remove the factory radio.
Jeep Wrangler i207-WRA 20201016v1 9/19 Factory Unit Disassembly Process (2011-2017 Only) 1 DISCONNECT THE BATTERY BEFORE CONTINUING. FAILURE TO DO SO WILL DISABLE MANY FEATURES. Remove the rubber cover from the top center storage area and extract (1) 7mm screw. 2 Remove the knee cover panel and extract (2) 7mm screws located to the right and left sides of the steering wheel column. Left side of steering wheel column. Right side of steering wheel column.
Jeep Wrangler i207-WRA 20201016v1 10/19 Installation Instructions 1 Attention: For 2011-2017 vehicles only. Insert the push clips from the factory bracket. Install the rear support bracket, using the (2) 7mm screws that were removed from the factory bracket, to attach head unit bracket in the same place. 3 5 2 Plug the OBDII connector on to the OBDII port below the driver side dash and run the extension to the radio cavity. Attach the side brackets using the provided 8mm round head screws.
Jeep Wrangler i207-WRA 20201016v1 11/19 Disconnecting the Uconnect® (only for 2011-2017 vehicles with factory Uconnect®) 1 3 2 Remove the factory climate control panel. It is clipped on and can be removed with a panel removing tool. Extract the (2) 7mm bolts from Uconnect® module. Disconnect the 24pin OEM connector. NOTE: Since the factory Uconnect® system is not going to be used you can unplug the 24 pin connector shown in step 2.
Jeep Wrangler i207-WRA 20201016v1 12/19 i207-WRA Wiring Diagram AMPLIFIED VEHICLES WARNING! r Re a Rear Front 10-Pin Chime Direct Camera Adapter Red Not Reset Used Button Direct Camera Input Audio L (White) Audio R (Red) Ground Video (Yellow) 18-pin Black Connector Not Not Used Used Aux Input Aux Input Cable (Sold Separate 3rd Party Cable) 18-Pin CAN I/F GPS HDMI IN PRE OUT ANTENNA MANUAL TRANSMISSION VEHICLES White/Gray Manual Transmission Reverse Input For manual transmission vehicl
Jeep Wrangler Do not use the head unit’s USB to power HDMI devices. i207-WRA This port is meant for Apple CarPlay, Android Auto, and USB flash drives. i207-WRA HDMI Usage With An iPhone For all phones the USB 20201016v1 iLX-207 Source Unit CAN I/F power source needs to be a 2A source. This will require a separate USB power source to be installed in the vehicle. USB GPS HDMI IN Do not use theSXM/DAB head unit’s USB to power HDMI devices. This port is meant for Apple CarPlay, Android Auto, EXT.
Jeep Wrangler i207-WRA 20201016v1 i207-WRA Wiring Diagram To SiriusXM Tuner Vehicle Antenna GPS Antenna (Included) SPEED SENSOR (Green/White) CAMERA IDATALINK I/F AUX INPUT REMO (Blue/White) Interface cable REVERSE (Orange/White) P.
Jeep Wrangler i207-WRA 20201016v1 15/19 Wire Harness Pin Outs Remote Harness Radio Main 8 16 7 15 6 14 5 13 4 12 3 11 2 10 1 9 Blue 22AWG Red 20AWG Blue/White 22AWG Orange/White 22AWG Yellow/Blue 22AWG Purple 20AWG Gray 20AWG Purple/Black 20AWG Gray/Black 20AWG Green 20AWG White 20AWG Green/Black 20AWG White/Black 20AWG Yellow 18AWG Black 18AWG DVD Display 5 1 6 2 7 3 8 4 Red 22AWG Red/White 22AWG Brown 22AWG Pink/Silver 22AWG Black 22AWG Black/Silver 22AWG Yellow 22AWG Orange/Silver 22AWG
Jeep Wrangler i207-WRA 20201016v1 16/19 Connection Of HCE-TCAM1-WRA (Optional Accessory) Direct Camera Adapter Direct Camera Input To HCE-TCAM1-WRA This connection goes to the direct video input of the head unit through the adapter. If you do not make this connection there will be no video to your iLX-207. iLX-207 Source Unit CAN I/F USB GPS SXM/DAB PRE OUT Main Harness ANTENNA To HCE-TCAM1-WRA This connection goes to the camera connector on the main harness.
Jeep Wrangler i207-WRA 20201016v1 Connection Of KAC-001 (Optional Accessory) KAC-001 Side View POWER RESET HEADUNIT CAN OUTPUT GND (Black) *Fuse Rating: 7A 8ch Output Harness (24-pin White) ACC (Red) Interface Cable (4-pin) (included with ADS module) BATT* (Yellow) USB port (Firmware updates only) Interface Harness (4-pin White) Power Harness (3-pin White) Reset Button UPDATE Output 1 (Purple) Output 2 (White/Red) Output 3 (Brown) Output 4 (Blue) Output 5 (Green) Output 6 (Pink) Connect to ID
Jeep Wrangler i207-WRA 20201016v1 18/19 Set Up Guide 1 2 3 4 Turn the vehicle’s Ignition switch to ACC. 5 6 If a camera is present, turn it ON in the system menu. (MENU/SETUP/SYSTEM/CAMERA/CAMERA SELECT). 7 8 9 If the AUX Input is being use be sure to turn it ON in the SETUP MENU. (MENU/SETUP/SOURCE/AUX). Turn ON the i207-WRA by pressing any key. Select the user language and press OK. With the vehicle parked, engage the parking brake, release the parking brake and engage the parking brake again.
Jeep Wrangler i207-WRA 20201016v1 19/19 Troubleshooting Guide Continued Symptom 5 Possible Cause Remedy One of the power wires does not have proper voltage Test the power wires with a digital multimeter and trace from there. 4 pin Maestro data cable is disconnected or damaged. Check for proper connection or disconnected pins. OBD2 cable is not plugged in. Connect OBD2 connector to the OBD2 port. Monitor or main harness are not connected. Check for proper connection or disconnected pins.
READ BEFORE INSTALLAT ION Our goal is to improve your in-vehicle experience. To achieve that, we are here for you. For installation assistance, questions about using your new Alpine Restyle System or if you're having problems with your Alpine product, we can help. Please choose one of the methods below for resolution to any issues you may have. TECHNICAL SUPPORT We are here to help with any questions you have about your Alpine Restyle product.
/////ALPINE~ To customers/ Hinweis an Kunden I Al'attention de l'utilisateur I / / / / /f I Informacion para los clientes I lnformazioni peri clienti I Till kunder I Aan klanten I Ana KnHeHTOB I Do klientow English The Owner's Manual has revision as shown here. androldaJto --+ androldauto'" Android --+ Android™ Android Auto Music --+ Google Play™ Music Google, Android, Android Auto, Google Play and other marks are trademarks of Google Inc.
Italiano II manuale viene moditicato come di seguito specificate. andtoldauto --+ andtoldauto"' And raid --+ And roid™ Android Auto Music --+ Google Play™ Music . Google, Android, Android Auto, Google Play e gli altri marchi so nodi pro prieta di Google Inc Ai clienti che han no acquistato il prodotto Alpine compatibile con Ia app Alpine Connect. La versione piu recente di Spotify none compatibile con Ia app Alpine Connect.
/////ALPINE To customers/ Hinweis an Kunden I Al'attention de l'utilisateur I / / / / /f I Informacion para los clientes /lnformazioni peri clienti I Till kunder I Aan klanten I Ana KnHeHTOB I Do klientow @ Thank you for purchasing this ALPINE product. The Owner's Manual has revision as shown here. I Vielen Dank, dass Sie sich fiir dieses ALPINE-Produkt entschieden haben. Die Bedienungsanleitung wurde wie bier gezeigt iiberarbeitet. I Nous vous remercions d'avoir achete ce produit ALPINE.
Thank you for choosing Alpine for your car audio equipment needs. Our goal is to produce the best audio/video/navigation products in the world and hope your expectations are met. Please take a moment to protect your purchase by registering your product now at the following address: www.alpine-usa.com/registration. You will be informed of product and software updates (if applicable), special promotions, and news about Alpine.
Notification Congratulations on your purchase of an Alpine Restyle System! Alpine Restyle products are covered under a 3-year Manufacturer's limited warranty from the date of the first consumer purchase. PLEASE NOTE THAT THIS PACKAGE INSERT IS NOT THE LIMITED WARRANTY ITSELF. To read and understand the Limited Warranty, please see the Limited Warranty which is printed in the owner's manual and also may be found at alpine-usa.com/support. We encourage you to register this product on Alpine's website at www.
GARANTIE LIMITEE Fidele a son engagement de ne fournir que des produits de qua lite, ALPINE ELECTRONICS OF AMERICA, INC.(« Alpine») est heureuse de vous offrir cette garantie. Nous vous suggerons dele lire attentivement et en entier. Si vous avez Ia moindre question, veuillez contacter l'un de nos concessionnaires ou appeler directement Alpine aux numeros listes ci-dessous.
LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. ("Alpine"), is dedicated to quality craftsmanship and is pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below. • PRODUCTS COVERED: @You must supply proof of your purchase ofthe product. This Warranty covers Car Audio Products and Related Accessories ("the product").
