Owner's Manual
Table Of Contents
- Installation Manual
- Introduction
- Note
- To Ensure Safe Use, Always Follow These Precautions
- Tools Required
- Accessory List
- Factory Unit Disassembly Process
- Installation Instructions
- Component Locations
- Connection Of An External Amplifier
- Connecting A SiriusXM Module (Sold Separately)
- Connection Of Optional Front Camera
- Connection Of Optional Front Camera
- i407-WRA-JL Wire Descriptions
- i407-WRA-JL HDMI Usage With An iPhone
- i407-WRA-JL HDMI Usage With An Android Phone
- Wire Harness Pin Outs
- Steering Wheel Configuration
- Set Up Guide
- Retained Features
- Troubleshooting Guide
- Owner's Manual
- Operating Instructions
- PRECAUTIONS
- WARNING
- Getting Started
- Setup
- General Setup
- Connection (Bluetooth) Setup
- Camera Setup
- Sound Setup
- Apple CarPlay (Optional)
- Android Auto (Optional)
- Radio/HD Radio™/RBDS
- Radio Basic Operation
- Listening to the Radio
- Presetting Stations Manually
- Presetting Stations Automatically
- Tuning to Preset Station
- Receiving a Multicast (HD Radio™ Mode only)
- Forced Analog Mode
- Selecting the Receivable Program Type (RBDS FM Radio Mode only)
- Using Ballgame Mode (HD Radio™ Mode only)
- Displaying Radio Text (HD Radio™/RBDS FM Radio mode only)
- About the Feature Logos
- USB Flash drive (Optional)
- USB Audio
- USB Video
- USB Photo
- iPod mode on iPhone (Optional)
- SiriusXM Satellite Radio Operation (Optional)
- HDMI Device (Optional)
- Bluetooth Operation
- Hands-free Phone Control
- Bluetooth Audio
- Auxiliary Device (Optional)
- Camera Operation (Optional)
- iDataLink Operation
- Information
- Installation and Connections
- LIMITED WARRANTY
Jeep Wrangler
i407-WRA-JL 20210330v1
10/22
Installation Instructions (Continued)
5 If the vehicle has an OEM amplifier the KCX-
F200INT will need to be purchased separately.
This has 30” of cable so it can be routed behind
the glovebox. It is important to do this so it can
disappate heat properly. The audio settings will
also need to be set to flat as shown on page 20.
6 Connect the camera interface module to the violet
or red factory camera plug and put it in right side
of radio cavity. Dip switch 1 will need to be moved
down for the Gladiator JT.
8 Run chime speaker harness from Maestro module
to behind the glove box and attach there.
9 Remove the OEM USB from the Center Media panel
by unclipping the clips on the sides.
7 Attach the Maestro to the main harness and tuck it
in left side of radio cavity.
10 Insert the X409 USB HDMI box into the OEM
Center Media panel.