Owner's Manual
Table Of Contents
- Installation Manual
- Introduction
- Note
- To Ensure Safe Use, Always Follow These Precautions
- Tools Required
- Accessory List
- Factory Unit Disassembly Process
- Installation Instructions
- Component Locations
- Connection Of An External Amplifier
- Connecting A SiriusXM Module (Sold Separately)
- Connection Of Optional Front Camera
- Connection Of Optional Front Camera
- i407-WRA-JL Wire Descriptions
- i407-WRA-JL HDMI Usage With An iPhone
- i407-WRA-JL HDMI Usage With An Android Phone
- Wire Harness Pin Outs
- Steering Wheel Configuration
- Set Up Guide
- Retained Features
- Troubleshooting Guide
- Owner's Manual
- Operating Instructions
- PRECAUTIONS
- WARNING
- Getting Started
- Setup
- General Setup
- Connection (Bluetooth) Setup
- Camera Setup
- Sound Setup
- Apple CarPlay (Optional)
- Android Auto (Optional)
- Radio/HD Radio™/RBDS
- Radio Basic Operation
- Listening to the Radio
- Presetting Stations Manually
- Presetting Stations Automatically
- Tuning to Preset Station
- Receiving a Multicast (HD Radio™ Mode only)
- Forced Analog Mode
- Selecting the Receivable Program Type (RBDS FM Radio Mode only)
- Using Ballgame Mode (HD Radio™ Mode only)
- Displaying Radio Text (HD Radio™/RBDS FM Radio mode only)
- About the Feature Logos
- USB Flash drive (Optional)
- USB Audio
- USB Video
- USB Photo
- iPod mode on iPhone (Optional)
- SiriusXM Satellite Radio Operation (Optional)
- HDMI Device (Optional)
- Bluetooth Operation
- Hands-free Phone Control
- Bluetooth Audio
- Auxiliary Device (Optional)
- Camera Operation (Optional)
- iDataLink Operation
- Information
- Installation and Connections
- LIMITED WARRANTY
Jeep Wrangler
i407-WRA-JL 20210330v1
11/22
Installation Instructions (Continued)
11 Plug in the OEM USB and the USB from the box
to the power adapter. The adaptor needs to be
plugged into the BLACK micro usb.
13 Attach the head unit to the mounting brackets
using the (4) M5X8LMM supplied screws.
14 Connect the main harness, microphone, USB,
HDMI, FM adapter, and other harnesses to the iLX-
407 head unit and secure them. Mount the head
unit to the dash using the (4) OEM screws removed
in step 9 of the disassembly.
12 WARNING: There are 2 factory micro USB plugs
in the dash behind the media center. One is black
and one is grey. If the supplied adaptor is plugged
into the grey micro USB the factory USB’s will not
charge. When it is plugged into the black plug all
rear USB’s can be used for charging (not data).
Incorrect
Correct
15 Clip in the dash kit and seecure the it using the
two screws removed in step 4 of the disassembly.
Reinstall the rest of the factory panels to complete
the installation.