Owner's Manual

Jeep Wrangler
i407-WRA-JL 20210330v1
 15/22
CAN I/F
USB
POWER
SXM/DAB
CAMERA/PRE OUT
HDMI IN
ANTENNA
VIDEO IN/OUT
MIC SWC
To Vehicle Connectors
iDatalink MAESTRO Module
18-pin Black
Connector
10-pin Green
Connector
(Vehicle signals)
3-pin Black
Connector
(Power)
4-pin Black
Connector
(Data)
To CAN Connector
Blue Power Antenna
Blue/White Amp Turn-on
ACC CAN
Power Harness
Chime Speaker
External Microphone
Power
Speaker
52-pin Connector
To Bluetooth Mic Input
18-PinChime10-Pin
3-Pin 4-Pin
3-Pin 4-Pin
Blue
Not
Used
Red
Not
Used
Reset
Button
10-Pin
Front
Rear
Rear
Front
AMPLIFIED VEHICLES
Requires the KCX-F200INT (sold separately)
WARNING!
AUX Input
FM
Antenna
(White)
SXM
Antenna
(Green)
Black
Not
Used
Optional
SiriusXM Tuner
(Sold Seperately)
Main Harness
CAN Connector Bank
SiriusXM
connect
Aux Power
USB, AUX, HDMI Interface
USB Power
SGS-BSV1-WJL
FACTORY CAMERA BSV INTERFACE
LVDS INUSB Flash
DIP1:
UP=Wrangler
Down=Gladiator
DIP 2,3,4,5,6,7,8
All up
DIP7:
Down=Firmware Update
VIDEO OUT
Power & CAN
IN
Can1
Can2
Rear
Camera
(Violet
or Red)
Aux Input
USB
HDMI
To Center Console USB Power connector in vehicle
Aux Power pass through
covered by protective cap
CAN pass through
connection in case bank is
full. Otherwise
not used.
Camera Power
Rear Camera Video Output RCA
Dip Switch 1 should be up
for the Wrangler and down
for the Gladiator. The rest of
the switches are not used.
Mini USB To USB
Black
Not
Used
This must be plugged into the black micro USB. See page 16 for details
Front
Rear
Rear
Front
Only 2 connections are
necessary for the OEM
amplied system. Front
(White) connects to Front
(White) from tuner. Rear
(Black) connects to Rear
(Black) towards the vehicle.
The other two connections
are not used.
X
X
iLX-407
Do not
plug
this
into
the
VIDEO
IN/OUT.
i407-WRA-JL Wiring Diagram Continued