Owner's Manual
Table Of Contents
- Installation Manual
- Introduction
- Note
- To Ensure Safe Use, Always Follow These Precautions
- Tools Required
- Accessory List
- Factory Unit Disassembly Process
- Installation Instructions
- Component Locations
- Connection Of An External Amplifier
- Connecting A SiriusXM Module (Sold Separately)
- Connection Of Optional Front Camera
- Connection Of Optional Front Camera
- i407-WRA-JL Wire Descriptions
- i407-WRA-JL HDMI Usage With An iPhone
- i407-WRA-JL HDMI Usage With An Android Phone
- Wire Harness Pin Outs
- Steering Wheel Configuration
- Set Up Guide
- Retained Features
- Troubleshooting Guide
- Owner's Manual
- Operating Instructions
- PRECAUTIONS
- WARNING
- Getting Started
- Setup
- General Setup
- Connection (Bluetooth) Setup
- Camera Setup
- Sound Setup
- Apple CarPlay (Optional)
- Android Auto (Optional)
- Radio/HD Radio™/RBDS
- Radio Basic Operation
- Listening to the Radio
- Presetting Stations Manually
- Presetting Stations Automatically
- Tuning to Preset Station
- Receiving a Multicast (HD Radio™ Mode only)
- Forced Analog Mode
- Selecting the Receivable Program Type (RBDS FM Radio Mode only)
- Using Ballgame Mode (HD Radio™ Mode only)
- Displaying Radio Text (HD Radio™/RBDS FM Radio mode only)
- About the Feature Logos
- USB Flash drive (Optional)
- USB Audio
- USB Video
- USB Photo
- iPod mode on iPhone (Optional)
- SiriusXM Satellite Radio Operation (Optional)
- HDMI Device (Optional)
- Bluetooth Operation
- Hands-free Phone Control
- Bluetooth Audio
- Auxiliary Device (Optional)
- Camera Operation (Optional)
- iDataLink Operation
- Information
- Installation and Connections
- LIMITED WARRANTY
44-EN
HDMI Device (Optional)
Devices supporting HDMI can connect and play back
through this unit (for example, an optional DVD Player,
iPhone or other Smartphones).
• The HDMI/MHL connecting cable differs depending on the
connected device corresponding to HDMI. Prepare optional
HDMI/MHL connecting cable sets suitable for your device.
HDMI Operation
■
iPhone, Smartphone, etc.
The output of your electronic device will be mirrored on this
unit through the HDMI connector. Control from this unit is
not possible.
• The electronic device must possess an HDMI output interface.
• Not all devices with an HDMI output interface can be
recognised by this unit.
• Use only the Alpine Special HDMI connection cable.
1 Touch the (HOME) button to select HDMI.
The display shows the HDMI mode screen.
• You can select and change the source in the HOME screen
(page 12).
• For your safety, video is not displayed and only audio can be
heard while driving.
2 In HDMI player mode, the screen of the device
displays the content of electronic equipment
by mirror image.
Sets the Brightness and Contrast
Displays the Sound Setup Menu screen
(page 24).
Setting the Brightness and Contrast
1 Touch [Visual].
2 Touch [ ] or [ ] to adjust the Brightness and
Contrast.
: Adjusting the Brightness
: Adjusting the Contrast