User Guide
7-EN
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing again will bring the audio back to its
previous level.
• During MUTE, the volume display blinks.
Setting the Time and Calendar
1
Press and hold
FUNC./SETUP
for at least 2 seconds
to activate the SETUP selection mode
.
2
Turn the Center Jog Dial to select the General
mode, and then press ENT.
Bluetooth General Display iPod Tuner
3
Turn the Center Jog Dial to select Clock Adjust,
and then press ENT.
The calendar setting mode is activated.
When the year is set, proceed step 5.
4
Turn the Center Jog Dial to select year, month,
day, hour or minutes to be set.
5
Press ENT.
The year setting mode is activated, and the year blinks.
(When “year” is set)
6
Turn the Center Jog Dial to set year, and then
press ENT.
The setting for year is complete. (When “year” is set)
7
Repeat steps 4 to 6 above to set month, day, hour
and minutes.
8
Press and hold
BACK
for at least 2 seconds to
return to normal mode.
• Only when Auto Clock is set to OFF, can the setting be made. Refer
to “Setting the Time to automatically Adjust” (page 10).
• Pressing BACK during the procedure will return to the previous
mode.
• If the Center Jog Dial is turned two steps and held, the number
changes continuously.
Displaying the Calendar/Time
Press VIEW.
The calendar/time is displayed. Pressing VIEW again will return
to normal mode.
• Selecting any tuner or iPod function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
• When the RDS mode is set, radio text can be displayed. Refer to
“Displaying Radio Text” (page 11).
• If an iPod is connected via USB, the album cover screen can be
displayed. Refer to “Changing the Display” (page 14).
Controllable With Remote Control
Point the optional remote control transmitter at the remote
control sensor.
Remote control sensor