Owner's Manual
Table Of Contents
- Operating Instructions
- PRECAUTIONS
- WARNING
- Getting Started
- Setup
- Setup Operation
- Device Setup
- Function Setup
- System Setup
- Sound Setup
- Apple CarPlay (Optional)
- Android Auto (Optional)
- Radio/HD Radio™/RBDS
- USB Flash drive (Optional)
- iPod mode on iPhone (Optional)
- SiriusXM Satellite Radio Operation (Optional)
- SiriusXM Tuner operation:
- Receiving Channels with the SiriusXM Tuner
- Selecting the Channel
- Selecting the Channel Directly
- Tuning Channels by Category
- Checking the SiriusXM Radio ID Number
- Storing Channel Presets
- Tuning Channels using Presets
- Replay Function
- Listening to the Recommended Channels “For You”
- Listening to Related Channels
- Setting Notifications
- Viewing Listening History
- Listener Settings
- Subscribing to SiriusXM by Phone
- Displaying the System Information
- Receiving Support by Phone
- Setting Your Location
- Banner advisory messages
- HDMI Device (Optional)
- Bluetooth Operation
- Hands-free Phone Control
- Bluetooth Audio
- Auxiliary Device (Optional)
- Camera Operation (Optional)
- iDataLink Operation
- Dash Cam (Drive Recorder) Operation (Optional)
- Information
- Installation and Connections
- WARNING
- CAUTION
- Precautions
- Accessory List
- Installation
- Caution concerning the installation location
- Mounting the Microphone
- Mounting the GPS Antenna inside the vehicle
- Note on using HDMI Connection Cables
- Position Adjustment and Mounting Dimensions of the Display (iLX-F509/iLX-F511 only)
- Adjusting the display position (iLX-F509/iLX-F511)
- Installation example using the Original Mounting Bracket
- Adjust the up-down position of the Display unit (iLX-F509/iLX-F511)
- Install the display unit (iLX-F509/iLX-F511)
- Connections
- System Example
- LIMITED WARRANTY
40-EN
Radio/HD Radio™/RBDS
The unit can receive HD Radio broadcasting signals based
on digital radio broadcast standards, in addition to analog
radio broadcasts using RBDS.
HD Radio broadcasting signals are broadcast in the service
areas of the current AM/ FM broadcasters where they
provide digital audio distribution and data services. This
unit receives the above digital broadcasts for your
high-quality sound enjoyment.
Depending on the signal strength in TUNER mode, the unit
will automatically switch between digital signals if they can
be received, and analog radio using RBDS if digital signals
cannot be received. For details, please see “Forced Analog
Mode.”
• RBDS mode is only available during FM broadcast reception.
This unit is able to receive signals based on the terrestrial
digital radio broadcasting standard.
When current AM/FM broadcasters are transmitting digital
audio and data services, HD Radio broadcasting signals are
on-the-air in their service area. You can receive their digital
broadcast and enjoy high quality sound.
If there is no HD Radio broadcasting signal in the current
area, after 15 seconds, this unit will switch to receive the
RBDS Radio signal automatically. However, the display is still
HD Radio Technology mode screen.
■
HD Radio main screen example
LIVE indicator
HD Radio indicator (HD Radio™ mode only)
Switch the FM band.
Switch the AM band.
Multicast station channels indicator
1: MPS (Main Program Service)
2 -8: SPS (Supplemental Program Service)
Information display
RBDS
Station Info. mode:
Frequency/PS Name/Artist Name/Song Name
Radio Text mode:
Frequency/Radio Text
• For details on switching the display of the Radio text,
see “Displaying Radio Text (HD Radio™/RBDS FM Radio
mode only)” (page 42).
HD Radio Technology
Station Info. mode:
Frequency/Station Name/Artist Name/Song Name
Increases frequency
Touch and hold to change the frequency continuously.
Displays the Radio Setup Menu screen (page
19).
Decreases frequency
Touch and hold to change the frequency continuously.
Memorizes stations automatically.
Switches a Seek mode.
Preset List
Displays the preset stations with a short touch.
Touch for at least 2 seconds to memorize the current
station as a preset station.
• The multicast station channel number is displayed
during multicast reception.
Artwork etc./Station Logo display (HD Radio™
mode only)
Radio Basic Operation
Listening to the Radio
1 Press the (HOME) button and select radio
mode.
The display shows the radio mode screen.
2 Touch [FM ] or [AM ] to select a band.
Each touch changes the bands as follows:
FM1
FM2 FM3 FM1
AM1
AM2 AM1
3 Touch [ ] repeatedly to select the tuning
mode.
The radio frequency up or down button changes
depending on the tuning mode.
Seek mode*: Stations with certain strength
or higher are tuned.
Digital Seek mode: Automatically receives a
receivable digital broadcast.
Manual mode: The frequency is manually
tuned in steps.
Program Type mode:
(RBDS FM Radio Mode
only)
The currently selected
program type station will be
tuned.
Preset mode: You can directly switch preset
stations.
* Depending on the signal, a digital or analog broadcast
is received.