Installation Guide

4 -EN
Mounting the Microphone
For safe use, make sure of the following:
• Location is stable and firm.
• Driver’s view and operations are not obstructed.
• Microphone is located where the driver’s voice can be
easily picked up (for example, on the sun visor).
When you speak into the microphone, you should not have to
change your driving posture. This may cause a distraction, taking
your attention away from safely driving your vehicle. Carefully
consider direction and distance while mounting the microphone.
Confirm that the driver’s voice can be easily picked up at the
selected location.
Install the Mounting Sleeve
Slide the unit into the mounting sleeve and secure it.
*1 If the installed mounting sleeve is loose in the dashboard, the
perssure plates may be bent slightly to remedy the problem.
*2 The supplied face plate may be mounted.
Installation example using the Original
Mounting Bracket
1
Mount the original mounting brackets to the unit
using the supplied screws.
2

Connect all other leads of the unit according to
details described in the “Connections” (page 5).
3

Mounting the unit in a car.
• Fix the cables carefully. Do not damage them by tucking
them into movable parts, such as a seat rail, or by
locating them against sharp or pointed edges.
Note on using HDMI Connection Cables
When using HDMI connection cables, secure the cables to the
HDMI Terminals with the HDMI Fixation Bracket(KCU-610HD).
*The HDMI bracket is not included.
1

Slide the HDMI Fixation Bracket into the grooves
(A).
2

Secure it with the screw (B).
Microphone
HDMI Terminal
HDMI Fixation Bracket
Sold Separtely
(KCU-610HD)
(A)
(B)
Cable clamp
(Sold separately)
1 Mount the original mounting bracket to
the unit using the supplied screws.
Ground Lead*
Screws (M5 × 8)
(Included)
Chassis
Original Mounting Bracket
Mounting Sleeve
This unit
Key Release
Pressure
Plates*1
Face plate*2
ALPINE_Install_Manual_AM_ENG_191019.indd 4 2019-10-19 오후 7:22:30