Owner's Manual

6 -EN
Getting Started
Location of Controls
The screen design used in the Owner’s Manual may differ from the actual screen.
■
For INE-W970HD
①
⑨
⑦ ⑧
②
③
④
⑤
⑥
Turning Power On/Off
Some of this unit’s functions cannot be performed while the is vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the
parking brake then release and apply and keep applied before attempting these operations.
〇①〇
Sound Settings or Eject button
Displays the [Tone/Fader/Balance] settings screen.
Press and hold this button to eject Disc.
〇②〇
or VOICE button
Depending on the connected smartphone, press to activate
Siri function or voice recognition mode. (Only works for Apple
CarPlay and Android Auto.)
〇③〇
(NAV) button
Recalls the navigation map screen.
Press again to switch to Navigation menu screen.
Press and hold this button for at least 2 seconds to change to
Go Home route screen. (If Home is not set yet, it will change to
the Home setting screen.)
For details of navigation operations, refer to “Navigation System
OM (Owner's Manual)”.
Recalls the connected smartphone’s map screen.
Depending on the smartphone, this function may not be available.
〇④〇
ALL MENUS or (Power Off) button
Recalls the All Menus screen.
Press and hold this button for at least 2 seconds to turn the power off.
〇⑤〇
(AUDIO) or (MUTE) button
Displays the Audio/Visual screen.
When pressed and held, mutes the volume.
〇⑥〇 +
/ − button
Press to adjust the volume.
〇⑦〇
Remote Sensor
Point the remote control transmitter towards the remote sensor
within a range of 2 metres.
〇⑧〇
Disc insert slot
Inserts/ejects discs
〇⑨〇
RESET switch
The system of this unit is reset.
1
Turn the ignition key to the ACC or ON position.
The system turns on.
2
Press and hold the All Menus/ (Power Off) button
for more than 2 seconds to turn the power off.
Owner’s manual Getting Started
ALPINE_QRG_AM_ENG_191027.indd 6 2019-10-27 오후 9:33:37