Owner's Manual

ManualsBrandsAlpine ManualsAudio accessories & installationRestyle Dash and Wiring Kit

Table Of Contents

Perfect Fit 2007-up Toyota Tundra (Excluding

JBL Systems)

KTX-TND8

Introduction

This KTX-TND8 Perfect Fit installation kit is for Select 2007+ Toyota Tundra vehicles (excluding

JBL systems). Included are all the parts needed to install your Alpine INE-Z928HD Audio Video

Navigation system in Select 2007+ Toyota Tundra vehicles. KTX-TND8 Perfect Fit installation kit

also includes an interface module that allows steering wheel remote control of the Alpine system.

Refer to the individual instruction sections of this manual to remove your vehicle’s factory radio

and assemble the kit.

Caution! Disconnect your vehicle’s negative battery terminal before the installation to

help prevent electrical damage. We recommend the use of a digital multimeter to check

vehicle wiring. Do not use a test light! A test light or grounded wire probe can cause

damage to the vehicle’s computer and/or diagnostic systems. Avoid all factory airbag

wiring. Airbags can accidentally deploy causing serious injury or even death.

Notes:

oØ2DDØXNTQØUDGHBKDlRØHMRSQTBSHNMRØENQØ@MXØRODBH@KØSNNKRØXNTQØHMRS@KK@SHNMØLHFGSØQDPTHQD

oØ1D@CØ@KKØHMRSQTBSHNMRØ@BBNLO@MXHMFØXNTQØB@QØRSDQDNØENQØOQNODQØVHQHMFØ@MCØLNTMSHMFØ

instructions.

+DESØ!Q@BJDSØWØ

1HFGSØ!Q@BJDSØWØ

3NXNS@Ø3QHLØ/@MDKØWØ Steering Wheel Interface

,NCTKDØWØØ

/NVDQØ'@QMDRRØWØ

"KHORØWØ

Summary of content (8 pages)

PAGE 1
Perfect Fit 2007-up Toyota Tundra (Excluding JBL Systems) KTX-TND8 3NXNS@Ø3QHLØ/@MDKØWØ +DESØ!Q@BJDSØWØ /NVDQØ'@QMDRRØWØ 1HFGSØ!Q@BJDSØWØ Steering Wheel Interface ,NCTKDØWØ Ø "KHORØWØ Introduction This KTX-TND8 Perfect Fit installation kit is for Select 2007+ Toyota Tundra vehicles (excluding JBL systems). Included are all the parts needed to install your Alpine INE-Z928HD Audio Video Navigation system in Select 2007+ Toyota Tundra vehicles.
PAGE 2
Factory Stereo Removal Ø4RDØ@ØO@MDKØQDLNU@KØSNNKØ /13 ØSNØQDLNUDØADYDKØ around the dash gauges Ø4RDØ@ØO@MDKØQDLNU@KØSNNKØ /13 ØSNØTMRM@OØSGDØ ONBJDSØADKNVØSGDØ "ØBNMSQNKRØ ØQDLNUD Ø Ø4RDØ@Ø/13ØSNØTMRM@OØ "ØBNMSQNKRØ ØQDLNUD Ø$WSQ@BSØ Ø LLØANKSRØRDBTQHMFØSGDØRSDQDN Ø4Msnap the top of radio and remove.
PAGE 3
Mounting The Stereo Ø SS@BGØRHCDØAQ@BJDSRØSNØSGDØ KOHMDØGD@CØTMHSØTRHMFØ the ISO screws (that come with the head unit). 2. Plug in the supplied radio harnesses and steering VGDDKØBNMSQNKR Ø1TMØ!KTDSNNSGØLHBØ Ø&/2Ø@MSDMM@ Ø @MCØHMRS@KKØENNSØAQ@JDØ@MCØO@QJHMFØAQ@JDØVHQDR Ø4RHMFØ SGDØ Ø LLØANKSRØRDBTQDØSGDØQ@CHNØHMØSGDØC@RGØ@MCØ place the kit over the front. 3. Secure radio into dash. Attach supplied clips to Toyota trim panel and install over radio. Put rest of dash back together.
PAGE 4
Wiring Harness Diagram To Toyota Tacoma Vehicle Harness 3NØ'D@CØ4MHSØ /NVDQØ"NMMDBSNQ To Parking Brake (-) at the parking brake in drivers kick panel To Foot Brake (+) at switch above pedal To Reverse Trigger Ø4RDØNMKXØVHSGØ@Ø back up camera (+) side of the reverse light 2A Audio Video Navigation System 15A TOØ2SDDQHMF Wheel connector (20-pin) Or TOØ2SDDQHMF Wheel connector (28-pin) INE-Z928HD Yellow/Blue To Steering Wheel "NMMDBSNQØNMØ'D@CØ 4MHS Yellow/Black Orange/White Ø3
PAGE 5
Mobile Media Solutions == ·== PERFECT ' .
PAGE 6
7 ALPINE ELECTRONICS OF AMERICA, INC. www.alpine.
PAGE 7
ks of Alpine Electronics, Inc. Alpine, Alpine Mobile Media Solutions, Driving Mobile Media Solutions are registered trademar d'Alpine Electronics, Inc.
PAGE 8
• • • • PERFECT SHAPE AND COLOR MATCH TO OEM DASH FOR FACTORY FIT INCLUDES ALPINE-TO-VEHICLE HARNESS FOR PLUG-AND-PLAY INSTALLATION INCLUDES RETAINING CLIPS INSTRUCTION MANUAL WITH STEP-BY.