User Manual

ALPINE MRV-V500 68-29530Z24-A (EN/FR/ES)
4-EN
Speak
• The
term
Be sur
conne
speak
outpu
negat
Abou
• The
• Reve
posi
subw
insta
Abou
In the
the po
right n
speak
a com
chann
NOTE
• Do n
vehi
Fuse
MRV-V
USE T
REPLA
Failure
shock
Powe
Batte
Be sur
lead a
(+) ter
electr
below
wire g
MRV-V
Groun
Conne
spot o
be a t
betwe
termin
audio
chass
wire le
Minim
conne
MRV-V
CONNECTIONS
Fig. 3
 Be sure to add an in-line fuse with the battery lead as close as possible to the battery’s positive (+) terminal.
Before making connections, be sure to turn the
power off to all audio components. Connect the
battery lead from the amp directly to the positive
(+) terminal of the vehicle’s battery with
appropriate in-line vehicle’s fuse (see Battery Lead
section). Do not connect this lead to the vehicle’s
fuse block.
To prevent external noise from entering the
audio system
• Locate the unit and route the leads at least 10 cm
(4”) away from the vehicle’s harness.
• Keep the battery power leads as far away from
other leads as possible.
• Connect the ground lead securely to a bare metal
spot (remove any paint or grease if necessary) of
the vehicle’s chassis.
• If you add an optional noise suppressor, connect
it as far away from the unit as possible. Your
Alpine dealer carries various noise suppressors,
contact them for further information.
• Your Alpine dealer knows best about noise
prevention measures so consult your dealer for
further information.