Owner`s manual

L Setting the point to avoid (POINT TO AVOID)

• This is set when there is a point that you do not want to be covered by route searches. Routes

are set to avoid roads between crossroads surrounding that point.

• Five locations can be set. (From X0 to X4 can be displayed on the memory point list.)

L Setting the point to beep (POINT TO BEEP)

• You can set the system to beep when you are driving and approaching a point requiring par-

ticular care (such as a point where accidents occur frequently).

• Up to ten locations can be set including the beep direction points (from B0 to B9).

L Setting the travel direction to beep (BEEP DIRECTION)

• For details on how to set the direction, see Page 68 Direction adjustment.

• You can set the system to beep, not only upon approach to a point but also from a specific

direction of travel. For example, you can set the system to beep as you near Las Vegas when

travelling from New York to Los Angeles.

• Up to ten locations can be set as directional beep points and beep points (from B0 to B9).

L Not used (NO SETTING)

• Use to cancel selected avoid points/beep points/directional beep points.

Address Book editing (Special Settings)

Select an entry you would like to

modify or delete and press ENTER.

(In this example, May Garden Restaurant

is chosen.)

Select Sp. and press ENTER.

The Special Setting screen appears.

Select the desired item and press

ENTER.

See page 41 for steps 1 and 2.

Sp.

ENTER