Installation Instructions

5-EN
3 Remove the top interchangeable color cover.
Exercise caution when removing the top plate.
- The LCD screen must be fully closed during removal.
- Begin removal from the rear of the panel (side facing the
3 button panel).
- Removal by hand or by using soft tools is recommended
as hard tools may scratch the panel surface.
- Grasp the cover by the indentations and pull gently until
the cover snaps off from the LCD screen.
Mount Side
Dome Light
Polarity Switch
+ S W -
(Detail of dome light
polarity switch)
Power
AV Input
Connector
AV Output
Connector
Wireless
Transmitter
Wire*
FM Switching
Box Mini Plug
(Option)
(Detail of AV connector ports)
AV Connector Ports
Connecting the Wireless Transmitter Wire
When listening to audio from vehicle speaker via FM
radio, connect included wireless transmitter wire and
change the antenna direction to get the best reception.
• FM reception performance depends on the vehicle antenna
location and position of the wireless transmitter wire. If the
reception is not good, please use optional FM Switching Box (Part
No.: TMXR2000FMSB). Then, the wireless transmitter wire must
be removed.
HDMI1 Input
Connector
Screw for pre-
venting loose
connection