Installation Manual

5 -EN
Loading and Unloading Discs
Turn on the power before loading and unloading discs.
Loading discs
1 Insert the disc with the label side facing upwards.
2 Once the disc is partially inserted, source is
changed to DVD from current source and the disc
is drawn in automatically. Playback starts.
s&ORTWOSIDED$6$SPLAYONESIDEOFTHEDISCTOTHEENDTHEN
UNLOADTHEDISCTURNITOVERANDRELOADITTOPLAYTHEOTHERSIDE
s)FWRONGDISCUPSIDEDOWNDISCSORDIRTYDISCSHAVEBEEN
INSERTEDh"AD$ISCvISDISPLAYED0RESS
ANDEJECTTHEDISC
Unloading discs
Press .
Be sure to remove the disc.
s)FTHEDISCISNOTREMOVEDWITHINAFEWMOMENTSITWILLBE
RELOADEDAUTOMATICALLY
s$URING!##/&&ORWHILETHEDISCISBEINGLOADEDh,/!$).'v
ISDISPLAYEDTHEDISCWILLNOTBEEJECTEDEVENIFYOUPRESS

DVD Commands
DVD control commands may also be accessed from within the
monitor itself. This is useful if the remote control batteries are
dead or the remote control is misplaced.
1 Press the DVD button on the Main Control Keys or
press DVD.CMD on the Remote Control to access
the DVD Command menu.
2 Press the four directional keys ( VW
) and
Enter to select the command.
DVD CONTROL
MENU
TOP
DISPLAY REPEAT
CLEAR
MENU
SUBTITLE
1
ANGLE
ENTER
RETURN
DVD SETUP
AUDIO
2 3 4 5 6 7 8 9 0
USB
1 Pull the USB Media Play cover out, plug the USB
storage device into the USB port.
2 Change the source to USB. Contents (video, music
and picture) will be played.
R
s0LAYORDERISDEPENDINGONlLESTRUCTUREINTHE53"STORAGE
s)FANEXTERNAL($$ISCONNECTED53"POWERMAYNOTBEENOUGH
ANDADDITIONALPOWERMAYBEREQUIRED
HDMI1 Input
One of two HDMI input ports is located on mount side of the
overhead monitor. Your installer may connect to any HDMI
compatible devices such as DVD head unit, stand-alone DVD
player or Digital TV Tuner. (In Europe)
HDMI1