Installation Manual

6 -EN
Monitor Setup
Picture Mode, brightness, color, tint and contrast are adjustable.
To access the Settings menus, press and hold the
DIMMER (
) button on the Main Control Keys
or Remote Control for at least 2 seconds and then
press
or
to select the Picture Settings, Screen
Settings, or System Settings menus.
ENT
DVD
Dimmer
ENT
DVD
Dimmer
Main Control Keys
MONITOR
DEVICE
SOURCE
DVD
MUTE
DEVICE
USB
HDMI2 AUXHDMI1
DVD.CMD PIC.M
Dimmer
Remote Control
Wait 8 seconds until OSD disappears; any
adjustments made will be saved automatically.
Picture Settings
SETUP
PICTURE
Backlight
MID
SCREEN SYSTEM
Picture Mode STANDARD
Contrast
0
0
0
0
Brightness
Color
Tint
Picture Reset
Setting the Backlight Brightness
Refer to "Setting the Backlight" section on page 4
for detailed instructions.
From the Picture Settings menu, press
or to
cycle through High/Mid/Low.
HIGH
MID
LOW
HDMI2 Input
The second HDMI input port is located with a USB power
connector on rear side of the overhead monitor.
s53"ISFOR6POWER!CHARGINGONLYANDDOESNOTPLAYMEDIA
s($-)AND53"CANBEEXTENDEDTOCENTERCONSOLEOROTHER
PLACEUSINGOPTIONALFT($-)53"%XTENSION#ONNECTOR
+#55(2EFERTOINSTALLATIONMANUALPAGE
MEDIA PLAY
POWER
AUX
Connect to any AUX output devices such as DVD
HU, stand-alone DVD or Digital TV Tuner.
HDMI2
Media Streaming Devices
Connect HDMI2 and USB
to use Media Streaming
Devices.
Smart Phone
Connect the MHL or Apple
HDMI adapter to HDMI2 to
use smart phone. Connect
to USB to charge the
phone.
KCU-
315UH
(sold
separately)
HDMI2USB Charge
MHL or
Apple HDMI
Adapter
Smart
Phone
Media
Streaming
Device
OR
HDMI2
Rear Center Console