Installation Manual

7 -EN
System Setting
The IR audio transmitter, FM modulator and frequency can be
adjusted for all available sources.
SETUP
PICTURE
IR Transmitter
SCREEN
SYSTEM
B
FMTransmitter OFF
FM Frequency
--.- MHz
Factory Reset
Setting the IR Audio Transmitter
The IR audio transmitter frequency setting is used to match your
)2HEADPHONEgSFREQUENCYlXEDSETTINGS
s4HEHEADPHONESINCLUDEDARESETTOCHANNEL!
Press or to select A/B/OFF. (Default: A)
CHANNEL A: 2.3 MHz/ 2.8 MHz
CHANNEL B: 3.2 MHz/ 3.8 MHz
Setting the FM Modulator
Press or to select FM Radio region
(OFF/USA/OTHERS). (Default: OFF)
It also turns ON or OFF by pressing FM Modulator
ON/OFF button on Front Passenger Control.
Setting the FM Frequency
Press or to select desired FM Radio
Frequencies between 88.1 MHz to 92.1 MHz.
(Default: 89.1 MHz)
 s53!FREQUENCYSTEPIS-(ZANDOTHERCOUNTRIESIS-(Z
Resetting to the Factory Default
Press ENTER Key, the entire settings including
picture, screen and system value will be restored
to the factory default.
DVD Setup
Press and hold the DVD button on the Main Control
Key or the DVD.CMD button on the remote control
to enter the DVD Setup menu for Parental Control
or other setting.
You may also access from the DVD Setup button
on the DVD Command screen. (page 5)
System : 16:9TV Type
: – – – –Password
: 8 AdultRating
: RestoreDefault
Language
Audio
Setting the Picture Mode
To change the Picture Mode, press or
to cycle
through the OSD and select from STANDARD,
VIVID, CINEMA, SPORT and GAME. (Default:
STANDARD)
VIVID
CINEMA
SPORT GAME
STANDARD
If any of the picture settings (Contrast, Brightness,
Color, and Tint) of any mode are adjusted, a
"CUSTOM" mode will be created and will be set
with the new values.
VIVID
SPORT
GAMECUSTOM
CINEMA
STANDARD
s0ICTURE2ESETDELETESh#534/-vMODE
Adjusting the Contrast/Brightness/Color/Tint
Press VorW to select the desired picture setting.
Press
or
to adjust the value of the chosen
setting. Each setting can be adjusted from –7(MIN)
to +7(MAX).
Resetting the Picture Settings
Press V or W until "Picture Reset" is selected.
Press ENTER to reset all picture settings to their
factory default values. This will only reset the
current Source Setting (DVD, USB, HDMI1, HDMI2,
or AUX).
Screen Settings
SETUP
PICTURE
Screen Mode
SCREEN SYSTEM
WIDE
TV System
AUTO
Screen Name
DVD
Remote Control
OFF
Setting the Screen Mode and TV System
Display mode on the screen can be adjusted to Wide, Cinema or
Normal. (Default: WIDE)
Press
or
to select WIDE/CINEMA/NORMAL
The Video Signal Standard (TV System) can be manually
switched. (Default: AUTO)
Press
or
to select AUTO/NTSC/PAL.
FM Modulator ON/OFF