IMPORTANT NOTICE! PLEASE READ FIRST BEFORE INSTALLING SPEAKERS Congratulations on your purchase of high quality speakers from Alpine. Your listening satisfaction is important to us. In order to maximize and maintain peak speaker performance the following guidelines are being provided . Please read this notice carefully before operating the speakers. 1. Do not over-drive the amplifier. Over-driving the amplifier will result in distortion or clipping and can damage any speaker. 2.
FOR VEHICLE USE ONLY/ POUR UNE UTILISATION AL'INTERIEUR D'UN VEHICULE UNIQUEMENT/SOLO PARA VEHICULOS l
ENGLISH Introduction: Please read this OWNER'S MANUAL thoroughly to familiarize yourself with each control and function. We at ALPINE hope that your new KTA-30FW will give you many years of listening enjoyment. In case of problems when installing your KTA-30FW, please contact your authorized ALPINE dealer. CAUTION: These controls are for tuning your system. Please consult your authorized Dealer for adjustment. ~WARNING This symbol means important instructions.
SERVICE CARE ♦ IMPORTANT NOTICE This Amplifier has been type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules. This equipment generates and uses radio frequency energy, and it must be installed and used properly in accordance with the manufacturer's instructions. ♦ For European Customers Should you have any questions about warranty, please consult your store of purchase.
CONNECTIONS (Fig. 1) G) Before making connections, be sure to turn the power off to all audio components. Connect the red battery lead from the amp directly to the positive(+) terminal of the vehicle's battery. Do not connect this lead to the fuse block. &cAUTION ♦ • Caution on connection terminals/parts Keep electrically conductive objects away from the unit's terminals/parts (power terminals, fuses, speaker output terminals, RCA connectors, etc.).
SWITCH SETTINGS (Fig. 2) KTA-30FW Right side paneVPanneau de droite/Panel derecho ® Input Signal Type Switch a) Slide switch to the left position for RCA Input signals (DEFAULT setting) b) Slide switch to the right position for speaker level input signals II] RCA $PK [·~@.;,}!l@.
ALTERNATIVE AMPLIFIER TURN-ON OPTIONS (Fig. 3) I - - G) KTA-30FW - I I I - ® - - ® - l I ® 0 @ Fig. 3 \V @ I <@ If your head unit does not have a traditional amplifier turn-on lead, refer to the options below for connection. Please check your head unit for the conditions listed below: (Fig. 3) a. The head unit does not have a remote turn-on or power antenna lead. b. The head unit's power antenna lead is activiated only when the radio is on (turns off in Bluetooth or CD mode). c.
TYPICAL SYSTEM CONNECTIONS/CONNEXIONS TYPIQUES DU SYSTEME/CONEXIONES TIPICAS DEL SISTEMA (Engllsh) ® Front Left Speaker (sold separately) @ Front Right Speaker (sold separately) @ Rear Left Speaker (sold separately) ® Rear Right Speaker (sold separately) RCA Input System/Systeme d'entree RCA/Sistema de entrada RCA r!i=+, .,lk=~- ® RCA Extension Gable (sold separately) ® Head Unit Speaker Connector ® CD Head Unit ® RCA to Mini Jack Cable (sold separately) i ® @ '•············: : ••••••• J 8 8.......
Powersports PSS-SX01 v20200724 1/9 PSS-SX01 Complete Weather-Resistant Powersports Sound System Installation Manual Introduction Congratulations on purchasing the PSS-SX01. This installation manual is designed to give you an overview of how to install the PSS-SX01. Please familiarize yourself with the owners manual before attempting the installation. If you still have additional questions please call 1-800-TECH-101.
Powersports PSS-SX01 Types of Precautions Forbidden Forbidden Mandatory Indicates that disassembly is forbidden. Indicates actions that are mandatory (must be performed) Marks content that should receive your full attention. Warning Forbidden Store screws and other small objects where children cannot reach them. If one of those small objects is swallowed, consult with a doctor immediately.
Powersports PSS-SX01 v20200724 Tools Potentially Needed Wire Strippers Wire Cutters Step Drill Bit Socket Set With 19mm Socket Extension Ratchet Phillips Screwdriver Torx Bits Air Saw Panel Removal Tools Wire Fishing Tool Cordless Power Drill Digital Multimeter Flathead Screwdriver 3/9
Powersports PSS-SX01 v20200724 4/9 Accessory List SPV-65-SXS Pod With Speaker x 2 KTA-30FW 4-Channel Amplifier KTX-BT100 Bluetooth Adapter 90 Degree Speaker Terminal Front Logo Badge x 2 Rear Logo Badge x 2
Powersports PSS-SX01 v20200724 Mounting The Speaker Pod Exploded View Remove 19mm bolt with socket or wrench. This will allow the clamp to slide back. Make sure the lock washer and washer go below the bolt in this order when tightening. Use the spacer for tubing that is 1.5’’ to 1.75’’. Do not use spacer if you have 2” tubing. Plug in 90 degree speaker terminal here. Attach the rear logo based on the orientation the pod is mounted.
Powersports PSS-SX01 v20200724 Bluetooth Module Connections Red Black Front Right RCA Input Grey (+) Front Right RCA Input Grey/Black (-) Front Left RCA Input White (+) Front Left RCA Input White/Black (-) To Chassis Ground To +12V Switched Ignition +12V Constant Leads Red x 2 (+) Ground Leads Black x 2 (-) Blue-White (+) Remote Input To Amplifier Connect Remote Output To Remote Input To front right Red RCA input (Gray Sleeve) To front left White RCA input (Gray Sleeve) Blue/White (Remote Out
Powersports PSS-SX01 v20200724 7/9 Bridging The Amplifier KTA-30FW To Right White (+) Rear Right Speaker Output Purple (+) To Right Black (-) Front Right Speaker Output Grey/Black (-) To Left Black (-) Rear Left Speaker Output Green/Black (-) To Right Pod Speaker Terminal To Left White (+) Front Left Speaker Output White (+) To Left Pod Speaker Terminal Recommended Amplifier Settings INPUT CH1/2 NOM 60 80 120 NOM FILTER RCA SPK INPUT NOM 2CH 4CH MIN MAX GAIN OFF HP LP CH3/4
Powersports PSS-SX01 How To Pair Phone 1 2 3 4 5 Open the settings menu of the phone. Go to the Bluetooth settings and make sure it’s turned on. Scan for devices. The phone will find KTX-BT100. Select KTX-BT100 on the phone to pair to it. Specifications Continuous Power Handling (RMS) 90W Woofer Size 6-1/2” Nominal Impedance 4 Ohms Frequency Response 50-22kHz Voice Coil Resistance (Re) 3.6 Ohms Free Air Resonance (Fs) 49 Hz Efficiency 87.8 dB @ 1W / 1m Electrical “Q” (Qes) .
Powersports PSS-SX01 v20200724 9/9 Dimensions 203mm 7-63/64” 214.5mm 8-7/16” 36mm 1-27/64” 310.6mm 12-15/64” 55.5mm 2-3/16” Troubleshooting Guide Symptom 1 System will not turn on. 2 Possible Cause Remedy Missing or blown fuse at the battery. Insert or replace fuse. Amp’s Remote Turn-On wire may be disconnected. Use a digital multimeter on the Blue/White remote wire to ensure it gets +12V positive when the audio system is on. If not trace the wire and correct the connection.
PSS-SX01 Weather-Resistant Side-by-Side Sound System PRODUCT OVERVIEW This complete sound system combines the premium sound you’ve come to expect from Alpine as well as a unique design that will complement the look of your Side-by-Side. As an easy add-on for any existing Side-by-Side with 1.5”-2” rails, the PSS-SX01 includes everything you need for an exciting music experience, including two enclosed 6.
PSS-SX01 Weather-Resistant Side-by-Side Sound System PRODUCT DETAILS SPEAKER SPECS WHAT’S INCLUDED: • Material: Santoprene • 6.5” 2-Way Mid Bass Drivers • Frequency Response: 50Hz - 22kHz • KTA-30FW 4-Channel Weather-Resistant Tough • Power Handling: 90W RMS / 225W Peak Power Pack Amplifier • Nominal Impedence: 4Ω • KCX-BT01 Weather-Resistant Bluetooth® Adaptor • Voice Coil Diameter: 25 mm • ASA 978 B+ Fiberglass Speaker Pod with FoldingStyle Clamp SPEAKERS: • Enclosed 6.
LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. ("Alpine"), is dedicated to quality craftsmanship and is pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below. ePRODUCTS COVERED: This Warranty covers Car Audio Products and Related Accessories {"the product"). Products purchased in the Canada are covered only in the Canada Products purchased in the U.S.A.
Thank yo~ for choosing Alpine for your car audio equipment needs. Our goal is to produce the best audio/video/navigation products in the world and hope your expectations are met. Please take a moment to protect your purchase by registering your product now at the following address: www.alpine-usa.com/registration. You will be informed of product and software updates (if applicable), special promotions, and news about Alpine.