Owner's Manual

ManualsBrandsAlpine Manuals6 1/2 Inch Car SpeakersWeather Resistant Packaged Sound System For Jeep Wrangler 2015-2018 (Pair)

Select the (2011-2014) crossover input wires and

connect to the vehicle plug. Connect tweeter

connectors. Secure the crossover.

Note: 2015-2017 input plug is not used.

Guide the tweeter in the opening and press into

place.

Front Speaker (Tweeters) Installation 2011 – 2014 Models

Remove the speaker by extracting the (3) factory

screws. (Save screws for later). Cut a slit in the center

of the polyfill, and pull the vehicle plug through. Insert

the excess polyfill into the enclosure. Note:

Installation of polyfill is needed for optimum

sound.

Add the foam strip, connect the vehicle plug to the

speaker.

1. Install using the reverse procedure

2. Repeat for the opposite side

Front Speaker (Woofers) Installation 2011 – 2018 Models

Add foam strip

(included)

Do not use

(2015-2017)

2007-2014

Connect the tweeter (-)

to the crossover and

select either:

0db wire

+3db wire

(Increased TW level)

for the tweeter (+) lead

(-)

(+)

TW level

+3db

0db

Press the tweeter into the 3.5” tweeter adapter.

Front Speaker (Tweeters) Installation 2015 – 2018 Models