Installation Manual

Jeep Wrangler

PSS-24WRA V20211025  12/15

1 Extract the (4) 5mm, allen head, bolts and remove

factory grills.

3 Remove gromment holding speaker wire in place

and secure speaker wire out of the way.

5 With a reciprocating air saw or preferred cutting

device, cut along the line from step 4.

Note: Be cautious when cutting not to cut thru the

topside of the sound bar.

2 Extract the (5) T20, torx, screws from the speakers

and the (4) T30, torx, screws from the port and

remove.

4 Use supplied template and mark area of each side

for soundbar cutting.

6 Fill the speaker cavities witht supplied polyﬁl

sheets.

Rear Soundbar Speaker Removal & Installation