Installation Manual

Jeep Wrangler
PSS-24WRA V20211025  2/15
Types of Precautions
Forbidden
Indicates actions that are
forbidden (must not be performed)
Forbidden
Indicates that disassembly is
forbidden.
Mandatory
Indicates actions that are
mandatory (must be performed)
Marks content that should receive
your full attention.
Warning
Do not disassemble or modify the product. Doing
so could lead to an accident, fire, or electric
shock.
Store screws and other small objects where
children cannot reach them. If one of those small
objects is swallowed, consult with a doctor
immediately.
When replacing fuses be sure to use the
fuses with the specified current rating.
Failing to do so could lead to an accident
or fire.
Only connect the product to a 12 VDC negative
ground car. Failing to do so could lead to an
accident or fire.
Since this vehicle has two batteries,
disconnecting the battery is not a good option.
Take caution when testing circuits. Failing to do
so could lead to electric shock or injury.
Do not cut the insulation on a cord and take power
from another device. Doing so could lead to fire or
electric shock.
Do not install the product in a location where it
willl obstruct the driver’s forward view; interfere
with the operation of the steering wheel, gear
shift, or the like; or pose a threat to passengers.
Doing so could lead to an accident or injury.
When making a hole in the vehicle body, be careful
to avoid damaging pipes, the fuel tank, electrical
wiring, and the like. This kind of damage could
lead to an accident or fire.
When installing and grounding the product, do not
use any of the bolts or nuts of the steering wheel,
brakes, fuel tank, or the like. Doing so could make
the brakes stop working or could lead to fire.
Do not install the product near the passengerside
airbag. Doing so could interfere with the operation
of the airbag and lead to an accident or injury.
Bundle cords so that they don’t interfere with
driving. Wrapping cords around the steering
wheel, gearshift, brake pedal, or the like could
lead to an accident or damage equipment.
Caution
Connect the product properly according to the
instructions. Failing to do so could lead to fire or
an accident.
Do not sandwich cords between the seat railing or
allow them to touch protrusions. Resulting breaks
or shorts could lead to electric shock or fire.
Do not block vents or heat sinks. Doing so could
lead to fire or damage equipment.
Use the accessories according to the instructions,
and attach them securely. Failing to do so could
lead to an accident or damage equipment.
Do not install the product where it may be
exposed to water or in a place with high levels
of humidity or dust. Doing so could lead to fire or
damage equipment.
The installation and wiring of this product
requires specialized skills and experience. Have
the product installed by an Alpine authorized
dealer.
Forbidden
Mandatory
Forbidden
Mandatory
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden