Installation Manual

Jeep Wrangler
PSS-24WRA V20211025  9/15
Front speaker removal and installation (continued)
25 Insert (1) polyfill sheet into each speaker pod,
connect and mount Speakers using factory
screws from step 22 then reinstall speaker pods in
reverse order and reassemble dash components
to their original location.
Insert Polyfil
l
27 Firmly press tweeter into mounting adaptor plate.
29 Connect tweeter to crossover and mount them
using the factory screws.
26 Extract (2) 7mm screws from each of the factory
top dash speakers and remove them.
28 Connect crossover as shown.
Note: it is recommended to use the red (+) lead
when utilizing the OEM radio.
Do not use
(2015-2017)
2007-2014
(2015-2017)
(-)
(+)
(+)
TW level
TW level
+3db
0db
Connect the tweeter (-)
to the crossover and
select either:
0db wire
(Default TW level) or
+3db wire
(Increased TW level)
for the tweeter (+) lead
30 Align the factory tweeter grill clips and secure by
firmly pressing downward.