Advanced Wireless Digital Sound Processor PXE-0850S • User Manual Please read this manual carefully before using the product.
English Contents Software for PC Operating Instructions Software Instructions ...............................10 Important Instructions for Software Installation ..........................................10 Warning Warning........................................................... 3 Attention.......................................................... 3 Introduction to Software Main Interface .............................................10 Important Instructions .....................................
Technical Parameter Indicators .....................20 Functional Parameter ........................20 Information Harmful Substances ..........................
Operating Instructions Important Instructions Warning Product Cleaning Warning This symbol is intended to alert you. It may cause serious injury or death if neglected by you. Please immediately stop using the product if any problem occurs. Please send the product to the designated Alpine dealers or nearby Alpine service centers for repairing. Do not use any functions that may divert your attention when driving. Only use such functions that distract you when the car stops.
How to read this manual Preparatory Works PXE-0850S machine is supplied with the wired controller. Using the wired controller could easily control PXE-0850S machine, or use PXE-0850S app or software to adjust or set the audio effect of PXE-0850S machine. These three control methods are varied and thus they will be described individually in the following chapters.
Mobile Phone App Mobile Phone App Instructions PXE-0850s Mobile Phone Setup 1. Download the PXE-DSP-APP from the Google Play or iOS App store. 2. Turn Bluetooth ON and search for DSP-HD-AXXXXX on your smart device. 3. Pair to DSP-HD-AXXXXX 4. Launch PXE-DSP App 5. Press the Bluetooth symbol and select DSP-HD-AXXXXX 6. Bluetooth logo will turn Green when paired. Go to $OSLQH SDJH ĺ Read the Disclaimer carefully and click “Accept” to go to the homepage. Control Interface interfaces. Machine Connections 1.
Mobile Phone App Protected Settings Switch Output Channel 1. For called sound effect data, you could click [Lock] to set a six-digit password to encrypt 31-band EQ frequency, Q-value and gain data. Meanwhile, tuning data could be encrypted, such as delay, channel, phase position and equalizer. Only current sound effect is encrypted, rather than all preset data. Encrypted sound effect data could be saved as preset sound effector a computer file.
Mobile Phone App Set Equalizer Click related value to set the frequency. The resolution is set at 1Hz. 1. Click [Reset EQ] to reset all EQ parameters to their default values and the preset values couldn’t be restored. Click [Direct EQ] to set all EQ gains to zero. Click [Restore EQ] to restore values before zero. 12dB/Oct ~ 48dB/Oct and the resolution is 6dB/Oct. III. Click [Channel] to enter the channel interface. Set Sound Volume and Phase Position of Output Channel 1.
Mobile Phone App 1. Click [Reset] to clear all output settings. 2. Click [Link] to link the left and right channel. Channel type is cleared 3. Channel interface will show related value for linked tuning. Set Delay IV. Click [Delay] to enter the delay interface. 1. The default unit of delay is [Millisecond] and either [cm] or [inch] is also available for selection. 2. Click the loudspeaker of related channels to set delay. V. Click [Audio Mixing] to enter the audio mixing interface.
Set Audio Mixing 1. PXE-0850S machine allows to set the sound volume allocated to each output channel after the sound source is input into the DSP, adjust the sound volume of each source to mix audio effects. Note: Please refer to software instructions for operating audio mixing (See page 15 and 16).
Software for PC Software Instructions Download PXE-0850S software for PC from Alpine-usa.com. After PXE-0850S software is installed, connect the PXE-0850S to the PC. Note: The functions of app are the same as software. So, please refer to the instructions for software for mobile devices. 1. Important Instructions for Software Installation • Software is run in Microsoft® Windows® system. Operating system: WindowsXP, WindowsVista, Windows7, Windows8, Windows10 CPU: 1.
Software for PC Audio Mixing Interface 3. Operating Instructions for Software d. Select [Save all presets]: Save all data in the EQ Interface When start PXE-0850S software, you will enter the EQ interface by default. Machine Connections files in the machine include current work preset, 6 sets preset, configured output channel data and data in the advanced setting) for the future use. This operation won’t change any data in the connected machine. 1.
Software for PC c. Set a signal threshold. If the input signal is higher than the threshold, it could be entered normally. Otherwise, it will be blocked. If the threshold is set reasonably, the machine will be automatically muted when the system has no signal input, so as to make system output quieter. Adjustment range: Close and -99.0dB~-40dB. For adjusted sound effect data, click [Encryption] to set a six-digit password to encrypt 31-band EQ frequency, Q-value and gain data.
Software for PC Q value: In the parametric EQ model, in the editing panel, you could adjust Q value through directly entering the value, scrolling mouse wheel or pressing up/down arrow keys (The range of adjustment: 0.404~28.85); In the EQ model in the Gain: In the editing panel, adjust the gain by directly entering the value, scrolling the mouse wheel or pressing up/down arrow keys or directly dragging the fader (the range of adjustment: -12.0dB~12.0dB). Set Equalizer Set Output Channel EQ 1.
Software for PC Linkwitz-Riley, Bessel and Butterworth options. Frequency setting: Adjust low-pass or high-pass frequency by directly entering the value, scrolling mouse wheel or pressing up/down arrow keys. Range of adjustment: 20Hz~20KHz. Select Type of Output Channel 1. Select output signal channel types. Frequency slope (Slop) setting: Drop-down menu has 8 options: 12dB/Oct, 18dB/Oct, 24dB/Oct, 30dB/ Oct, 36dB/Oct, 42dB/Oct, 48dB/Oct and close.
Software for PC Audio Mixing Interface In default output configuration, click [Audio Mixing] to enter the audio mixing interface. Click CH1~CH12 to view the interface of each default channel. Set Audio Mixing PXE-0850S machine allows to set the sound volume allocated to each output channel after the sound source is input into the DSP, adjust the sound volume of each source to achieve audio mixing.
Software for PC Example 2: Illustration of original car main machine’s high-level dual-modulus active crossover and stereoscopic full-frequency output Pre-left High frequency Medium and low frequency CH1 left full-frequency output L Pre-right High frequency Medium and low frequency CH2 right full-frequency output R Original car main machines’s high-level dual-modulus crossover output Example 3: Illustration of original car main machine’s AUX connected to CD device, AUX mixing input and stereoscopi
Wired Controller Wired Controller Operating Instructions PXE-0850S wired controller machine is only suitable for PXE-0850S machine. Before using wired controller, connect the wired controller to the main machine and ensure that software or app isn’t connected. Connect PXE-0850S wired controller to PXE-0850S machine and power on properly. Machine Connections 1. After the machine is connected, the following interface will show: Note: The session will automatically time out if left idle for 20s.
Machine Introduction 1.
2. Introduction to Machine Interface ༃ Main machine USB port connects to the computer via USB3.0 cord. Start PXE-0850S software to switch sound sources of main machine and perform such functions as data storage, calling and EQ. USB port connects to the wired controller via USB3.0 cord and perform functions including switching sound source, data calling and adjusting master sound volume via the wired controller. ༌ High-level input and power input interface connects to in-vehicle CD or DVD.
Technical Parameter Indicators Dynamic range 110dB Signal-to-noise ratio G% Total harmonic distortion Frequency response 20Hz~20KHz Input impedance /RZ OHYHO LQSXW .
Harmful Substances Name and contents of poisonous and harmful substances or elements contained in PXE-0850S machine Poisonous and harmful substances or elements Name of Accessories Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent chromium (Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) Circuit board components Ɉ Ɉ Ɉ Ɉ Ɉ Ɉ Shell components Ɉ Ɉ Ɉ Ɉ Ɉ Ɉ Display components Ɉ Ɉ Ɉ Ɉ Ɉ Ɉ Accessories Ɉ Ɉ Ɉ Ɉ Ɉ Ɉ Ɉ: represents that the content of poisono
IMPORTANT INFORMATION /W#/ILPNE. Driving Mobile Media Innovation Default PXE-08505 preout settings CH 1/2 Front Woofer (20Hz-500Hz) CH 3/4 Front Midrange (600 Hz-1500 Hz) CH 5/6 Front Tweeter (2.2 kHz - 20 kHz) CH 7/8 Rear Woofer (20Hz-500Hz) CH 9/1 0 Rear Tweeter (2.2 kHz - 20kHz) CH 11 Center (20Hz - 20kHz) CH 12 Subwoofer (20Hz - 150 Hz) *Crossover Settings can be changed in PC or phone app For owners manual and PC app please go to https://www.alpine-usa.
Thank you for choosing Alpine for your car audio equipment needs. Our goal is to produce the best audio/video/navigation products in the world and hope your expectations are met. Please take a moment to protect your purchase by registering your product now at the following address: www.alpine-usa.com/registration. You will be informed of product and software updates (if applicable), special promotions, and news about Alpine.
GARANTIE LIMITEE Fidele a son engagement de ne fournir que des produits de qualite, ALPINE ELECTRONICS OF AMERICA, INC. («Alpine») est heureuse de vous offrir cette garantie. Nous vous suggerons de le lire attentivement et en entier. Si vous avez Ia moindre question, veuillez contacter l'un de nos concessionnaires ou appeler directement Alpine aux numeros listes cidessous.
LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. (11 Aipine 11 }, is dedicated to quality craftsmanship and is pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below. ePRODUCTS COVERED: This Warranty covers Car Audio Products and Related Accessories (11 the product .. ). Products purchased in the Canada are covered only in the Canada. Products purchased in the U.S.A.