Owner's Manual

a. Adjust master sound volume: adjust the
master volume by directly dragging the volume
fader, or entering the value or scrolling mouse
wheel. The adjustment range: Close -59dB~6dB.
b. Mute button: Click the panel of setting
master sound volume [
] to mute master
sound volume and click again to cancel the mute
(mute will be automatically canceled when
adjusting the master sound volume).
12
c. Set a signal threshold. If the input signal is
higher than the threshold, it could be entered
normally. Otherwise, it will be blocked. If the
threshold is set reasonably, the machine will be
automatically muted when the system has no
signal input, so as to make system output quieter.
Adjustment range: Close and -99.0dB~-40dB.
The progress bar starts to change color and
After updated, the machine will be rebooted.
e. Click [About] to view the device version.
f. Click [Restore Factory Settings] to restore to
the default settings.
Set Preset Sound Effect
1. Call and store preset sound effect. Click [Call]
or [Save] to set six preset.
Data Encryption
1. Data encryption and decryption.
For adjusted sound effect data, click
[Encryption] to set a six-digit password to encrypt
31-band EQ frequency, Q-value and gain data.
Meanwhile, tuning data could be encrypted, such
as delay, channel, phase position and equalizer.
Only current sound effect is encrypted, rather
than the whole machine data. After encrypted,
the sound effect data could be saved as preset
transmission won’t affect the encryption status.
Encrypted data could be decrypted by clicking
[Decryption] and entering the correct password.
Warning! Please make sure to remember the
password. If you forget your password, you
couldn’t decrypt.
Switch Audio Input Source
1. Select type of sound source from the
drop-down list.
Four types of sound sources are available for
selection: Digital, Bluetooth, AUX and high-level
input. Among them, Bluetooth has the highest
priority. If the machine detects Bluetooth when
playing music, the machine will switch to
Bluetooth compulsorily and return to previous
sound source when the music ends.
Adjust the Master Volume
1. Edit, adjust and display master sound volume
of output signals.
Switch Output Channel
1. Channel edit and switch: totally 12 output
channels could be edited or switched. The default
settings of 12 output channels are illustrated in the
Software for PC