Owner's Manual

17
Wired Controller Operating Instructions
PXE-0850S wired controller machine is only
suitable for PXE-0850S machine. Before using wired
controller, connect the wired controller to the main
machine and ensure that software or app isn’t
connected. Connect PXE-0850S wired controller to
PXE-0850S machine and power on properly.
Machine Connections
1. After the machine is connected, the following
interface will show:
Control Interface
1. PXE-0850S machine’s wired controller has the
following control interface:
Adjust the Master Volume
1. Adjust the master sound volume of machine by
twisting the knob of wired controller. Increase the
sound volume by twisting the knob in a clockwise
direction and decrease the sound volume in an
anticlockwise direction. The wired controller interface
will show the sound volume in real time.
2. Press the knob of the wired controller shortly to
knob. Activate the mute by twisting the knob in a
clockwise direction and the sound volume 0 will be
displayed. If twisting the knob in an anticlockwise
direction, the mute will turn off and the original sound
volume will be restored. Long press the knob to exit
from the functional panel.
Note: The session will automatically time out if
left idle for 20s.
Switch Audio Input Source
1. Short press the knob again to select the
second functional panel - Switch to input sound
source functional panel and the screen will keep
knob. In the clockwise direction, options are: S/
PDIF (digital), Hi.Level (high-level), Phone
(Bluetooth), AUX (low-level). Long press the knob
to exit from the functional panel.
Note: The session will automatically time out if
left idle for 20s.
Set Preset Sound Effect
1. Press the knob shortly to select the third
functional panel - Call preset sound effect and the
effects are available for selecting via the knob. In
the clockwise direction, there are 6 sets of preset
sound effects available for selection.
Select the intended sound effect and press the
knob shortly to call this sound effect. Long press
the knob to exit from the functional panel.
Note: The session will automatically time out if
left idle for 20s.
Wired Controller