User Manual

Sound Processor
PXE-0850S  24/27
PC App Overview Continued
16 Channel Phase Sets the phase from 0 to 180.
17 Channel Mute Press to mute the selected channel.
18 Channel Output Adjust Channel Output levels between 0-60.
19 Delay Units Select between Milliseconds, Centimeters, and Inches as the incriment to adjust the delay.
20 Delay Time Enter the value of the channel delay.
21 Enable/Disable EQ Press to turn the EQ settings on or off.
22 Reset EQ Reset the EQ settings.
23 P. EQ/ G. EQ Mode
Selects either the Parametric EQ mode or the Graphic EQ mode. Switching the mode will result in a loss of
all settings.
24 Gain Slide up or down to increase or decrease the gain between -12dB and +12dB.
25
Frequency, Q Value,
Gain
Adjust the Frequency, Q-Factor, and Level. Note: Q and Frequency can only be adjusted when using the
Parametric EQ. Only level can be adjusted in Graphic EQ mode.
26 EQ Curve Displays the current curve of the EQ adjustments.
1
2
1 Channel Selection Select a channel to modify
2 Mix & Mixer Setting
Matrix mixing allows routing any of the 6 High or Low Level inputs to any of the 12 Low Level or 8 High Level
outputs.
Mixer Adjustment