User Manual

Sound Processor

PXE-0850S  25/27

Controller Interface

REMOTE COMMANDER PXE-0850S

1 Rotary Encoder

Short press (less than 1 second) to scroll through the menus. Turn to scroll through different selections

within each menu. Long press (press and hold for 2 seconds) to exit the selected menu.

2 Mute

1. The ﬁrst short press of the Rotary Encoder selects the Mute menu and it will ﬂash to give visual

conﬁrmation that it is selected.

2. Turn the Rotary Encoder left or right to select either Mute On or Mute Off. If Mute On is selected the

Volume will display 0. If Mute Off is selected the Volume will go back to the original setting.

3. Once the desired setting is made a short press will move to the Input menu or a Long press will store the

selection and exit the menu. The menu will automatically time out if nothing is pressed for 20 seconds.

3 Input

1. The second short press of the Rotary Encoder selects the Input menu and it will ﬂash to give visual

conﬁrmation.

2. Turn the Rotary Encoder left or right to scroll through the Input selections. : S/PDIF (digital), Hi.Level

(high-level), Phone (Bluetooth), AUX (low-level).

3. Once the desired setting is made a short press will move to the Preset menu or a Long press will store

the selection and exit the menu. The menu will automatically time out if nothing is pressed for 20 seconds.

4 Preset

1. The third short press of the Rotary Encoder selects the Preset menu and it will ﬂash to give visual

conﬁrmation.

2. Turn the Rotary Encoder left or right to scroll through Presets 1-6. A short press will select the Preset

and then bring up a loading screen.

3. Once the Preset has loaded the menu will be exited. The menu will automatically time out if nothing is

pressed for 20 seconds.

5 Volume

Adjust the master Volume by turning the rotary encoder clockwise or counterclockwise. Clockwise will

increase the Volume and counterclockwise will decrease the Volume. The interface will display the volume

numerically 0-66 and it will also display it incrementally (in tenths until the ﬁnal 6) with the bars.

3 4

Note: If a laptop is connected or the phone app is launched and connected the Controller will be inoperable. It will display the Alpine logo

and can’t be used.