R ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 7300 Warden Ave., Suite 203, Markham, Ontario L3R 9Z6, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
TMI-M990 VGA IN-DASH MONITOR • OWNER'S MANUAL Please read before using this equipment.
Contents Operating Instructions WARNING WARNING .............................................. 3 CAUTION ............................................... 4 PRECAUTIONS ...................................... 5 Getting Started About the Remote Control ...................... 6 About the indicators and the microphone ... 7 Using the TMI-M990 with an IONBUS connection ............................................. 7 How to Read This Manual ....................... 8 Basic Operation Using Face Cover ..............
Contents Operating from the Head Unit Switching the Source ............................. 47 Adjusting the Volume ............................ 47 Operating the Head Unit with the Remote Control ................................... 48 Information In Case of Difficulty .............................. 49 Specifications ........................................ 50 Installation and Connections Warning ................................................. 51 Caution ..................................................
WARNING WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER CANNOT WATCH TV/ VIDEO UNLESS THE VEHICLE IS STOPPED AND THE EMERGENCY BRAKE IS APPLIED. It is dangerous (and illegal in many states) for the driver to watch TV/Video while driving a vehicle. Installing this product incorrectly enables the driver to watch TV/ Video while driving.
WARNING USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result in fire, electric shock or other injury. DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS. Doing so may result in personal injury or damage to the product. CAUTION This symbol means important instructions. Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
PRECAUTIONS Product Cleaning Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic. Remove the anti-theft cover when you drive. This prevents the cover from falling off the unit and interfering with the safe operation of the vehicle. Operation of some of the functions of this unit is very complex.
Getting Started About the Remote Control Notes on Using the Remote Controlmmmmmmmmmmm Point the remote control transmitter at the remote control sensor. If connected to an IONBUS compatible head unit, even if you point the remote control at the remote control sensor on the head unit, the operation is received the same way. Battery Replacement Applicable battery: Use two “AAA” sized dry batteries or equivalent. 1 Opening the battery cover.
About the indicators and the microphone Display indicator*1 Lit when the display is on. Road EQ microphone (When Multimedia Manager, PXI-H990, is connected) One of the functions of the Road EQ is a microphone when connected to the Multimedia Manager (PXI-H990) (sold separately). For more information, refer to the PXI-H990 Operating Instructions. Brightness sensor Detects the ambient light level. Action indicator Input indicator*2 Flashes when the display opens and shuts.
Getting How to Read Started This Manual This manual details how to operate the TMI-M990 and the supplied remote control RUE-4199. Basic Operation V.SEL/ V.MUTE WIDE/ R.SEL R.SEL/WIDE V.SEL/DISP.OFF Switching the Source Main unit icon Indicates operations performed on the main unit. 1 Continued (Next page) Indicates that the description of the operation continues on the next page.
Basic Operation Using Face Cover An anti-theft face cover is provided with the TMI-M990. Put the face cover onto the TMI-M990 when you leave the vehicle. Be sure to remove the anti-theft face cover when you drive.
○ Press the reset switch with the tip of a pen. ○ ○ ○ ○ ○ ○ ○ • To switch off the power on an IONBUS compatible head unit when it is connected: When the head unit power is switched off, the TMI-M990 power is also switched off. The power cannot be switched off from the TMI-M990.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ When the TMI-M990 is connected to an IONBUS compatible head unit: • The TMI-M990 power is linked to the head unit. When the head unit is switched on, the TMI-M990 is also switched on, and when the head unit is switched off, the TMI-M990 is also switched off. For details, refer to the head unit Operating Instructions. • The power cannot be switched off from the TMI-M990.
Basic Operation ○ ○ ○ Press OPEN/CLOSE / SETUP. The unit beeps 3 times and raises (or lowers) the monitor automatically. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • The TMI-M990 is a precision device. With gentle handling, its unique capabilities can be enjoyed for a long time. • When the movable monitor is opened, do not place any object on the monitor and be careful not to bump or apply any pressure to the monitor while it is open. This can cause damage to the mechanism.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • If the display stops during opening/closing, then press OPEN/ CLOSE / SETUP again. If it still does not move, then contact your Alpine dealer. Do not force the display. You may damage your TMI-M990. • The display activates using the values stored for angle adjustment and back and forward adjustment. See “Adjusting the Display Back and Forwards” (this page), and “Adjusting the Monitor Viewing Angle” (page 14). Supplement See page 18 for supplementary information.
Basic Operation /VOLUME /VOLUME /FLAT /TILT /TILT /TILT /TILT Adjusting the Monitor Viewing Angle ○ ○ ○ ○ ○ ○ ○ Press / TILT and / TILT to adjust the monitor's angle so the screen will be in the best viewing position. Pressing the buttons produces a beep and changes the screen angle between about 40 and 105 degrees. ○ ○ ○ ○ ○ ○ ○ ○ • By pressing and holding / TILT or / TILT, the angle changes continuously. • You can also adjust the display angle by selecting from one of 10 levels.
Moving the Monitor to be Flat When you want to operate some function on the car (air conditioner, etc.) which is hidden by the raised monitor, use this function. The following operation is performed with the supplied remote control. 1 Press and hold /FLAT for at least 2 seconds. The monitor moves to the flat position. 2 Press and hold /FLAT again for at least 2 seconds. The monitor returns to the previous angle. • The monitor returns to the previous angle from being flat after 10 seconds.
Basic Operation V.SEL/ V.MUTE WIDE/ R.SEL R.SEL/WIDE V.SEL/DISP.OFF ○ ○ ○ Press V.SEL/DISP.OFF. Each press of the button will cycle through the modes as follows: AUX-1 AUX-2 AUX-3 DVD ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ When connected with an IONBUS compatible head unit: • The picture source can be switched from the head unit. For details, see Operating from the Head Unit “Switching the Source”, page 47. ○ • AUX-1, 2, 3 is only displayed when AUX IN 1, 2, 3 SIG. is ON.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ In Cinema mode, the monitor displays a normal picture by stretching out the picture horizontally and vertically. This mode is good for displaying a cinema type picture at the 16 : 9 ratio. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ In Wide mode, the monitor displays a normal picture wider to fit in a wide-screen monitor by evenly stretching out the picture horizontally.
Basic Operation Supplementary information TITLE Initial System Startup Turning Power On or Off Opening/Closing the Monitor 18-EN This page includes supplementary information for pages 9 to 17. Please refer to these pages. Description Related page When reset, the stored contents are lost. Perform storage and adjustment one more time. Page 9 If you reset when the display is open, then the display is automatically closed.
TITLE Adjusting the Monitor Viewing Angle Description Related page If the monitor touches an obstacle while the angle is being adjusted, the unit stops the screen immediately. Should this happen, remove the obstacle and press / TILT or / TILT again. The screen color will vary when viewed at certain angles. Adjust the screen angle for the best viewing position. If the voltage of the vehicle's battery power is low, the screen may blink when the screen angle is changed. This is normal and not a malfunction.
Other Useful Features /FLAT V.EQ /O/C VISUAL EQ /TILT /TILT OPEN/CLOSE / SETUP About VISUAL EQTM To display the Setup screen: To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below. 1. Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2. Keep pushing the foot brake and release the parking brake once then engage it again. 3.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ To exit VISUAL EQ SETUP, press and hold VISUAL EQ for more than 2 seconds. The screen returns to normal mode. ○ 3 ○ Press and hold VISUAL EQ for at least 2 seconds. The VISUAL EQ SETUP screen is displayed, and various VISUAL EQ settings can be made. ○ ○ • If you select OFF in step 1, then VISUAL EQ settings etc. cannot be performed.
Press OPEN/CLOSE / SETUP and select VISUAL EQ. 4 Select your preferred VISUAL EQ property with either / TILT or / TILT. ○ ○ ○ ○ 3 ○ Press and hold VISUAL EQ for at least 2 seconds. The VISUAL EQ SETUP screen is displayed. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Flat image Brightens up a dark scene. Suitable for movies with a lot of dark scenes. SOFT: Suppresses screen glare. Suitable when watching CG or animation. SHARP: Sharpens the picture. Suitable when the picture is not clear.
Adjusting and Storing VISUAL EQTM ○ ○ Press VISUAL EQ to select the VISUAL EQ ON mode. OFF ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Press and hold VISUAL EQ for at least 2 seconds. The VISUAL EQ SETUP screen is displayed. ○ 2 ○ ○ ○ • When VISUAL EQ is ON, the selected VISUAL EQ property name is displayed. (See page 20) • “OFF” is set on this unit when the power is first turned on. Press VISUAL EQ to display “FLAT”. ○ ○ ○ ○ VISUAL EQ ON ○ ○ 1 ○ ○ You can store up to two of your image adjustments.
○ ○ ○ ○ ○ ○ ○ Press OPEN/CLOSE / SETUP or VISUAL EQ, and select an item to adjust from BRIGHT, COLOR, TINT, CONTRAST, SHARPNESS. When you press OPEN/CLOSE / SETUP, you move to the next item, press VISUAL EQ to move to the previous item. 5 When adjusting another item, repeat steps 3 and 4. 6 When the picture settings are complete, press OPEN/CLOSE / SETUP or VISUAL EQ and select V.EQ MEMORY. When you press OPEN/CLOSE / SETUP, you move to the next item, press VISUAL EQ to move to the previous item.
○ ○ After setting, press and hold VISUAL EQ for at least 2 seconds. The screen returns to the previous one. ○ 9 ○ Press V.SEL/DISP.OFF. The stored adjustments are applied to the current video image. ○ ○ ○ ○ ○ ○ ○ ○ • To recall the stored adjustment values, see “Selecting the VISUAL EQTM Property” (page 21). • After selecting the manufacturer’s setting of VISUAL EQ property (NIGHT MOVIE etc.), the property can be adjusted and saved. While adjusting, CUSTOM is displayed.
Other Useful Features About REAR SELECTOR With a rear monitor connected to the TMI-M990, its adjustments may be set using the REAR SELECTOR screen. The following steps 1 to 4 are common operations for the REAR SELECTOR screen. Refer to each section for details. ○ ○ ○ Press R.SEL/WIDE. The screen changes to the REAR SELECTOR screen.
○ ○ ○ After setting, press R.SEL/WIDE. The screen returns to the previous one. ○ 4 ○ Changing the setting item by pressing / TILT. ○ 3 ○ Press OPEN/CLOSE / SETUP or VISUAL EQ and select the item to set. When you press OPEN/CLOSE / SETUP, you move to the next item, press VISUAL EQ to move to the previous item.
Other Useful Features Rear Entertainment Function The rear entertainment function independently routes different sources to the front and the rear of the car. For example, while listening to the radio or other audio source in the front, DVD can be enjoyed in the rear with the optional rear monitor and headphones. Setting item: AUX OUT1, AUX OUT2 AUX OUT1*1: Select the source, from the list below, that is output to AUX OUT1. AUX OUT2: Select the source, from the list below, that is output to AUX OUT2.
Switching the Function of the Remote Sensor The remote sensors of the external unit (monitor, etc.), can be selected for Remote control operation from the external unit. Setting item: REM.CON IN Setting content: FRONT, REAR-1, REAR-2 FRONT: The remote control sensor on the main unit is enabled. Remote control operation from any external monitor is disabled. REAR-1*4: The remote sensor of the external monitor connected to AUX OUT1 is enabled.
Other Useful Features Switching the Visual Source Only (Simultaneous Function) ○ Press V.SEL/DISP.OFF. The TMI-M990 picture source changes each time it is pressed. ○ 2 ○ Change to your preferred source (FM, AM, CD etc.) on the head unit. For details, see the head unit operating instructions. ○ ○ ○ ○ ○ ○ ○ 1 ○ ○ When an IONBUS compatible head unit is connected, you can watch the video portion of another source while listening to the current source.
Other Useful Features Supplementary information TITLE Adjusting and Storing VISUAL EQTM This page includes supplementary information for pages 20 to 31. Please refer to these pages. Description Adjusting and storing of VISUAL EQ can also be made from the setup. The procedure is below. For more details, see the General Setup Operation. Operation from the main unit 1 Press and hold OPEN/CLOSE / SETUP for at least 2 seconds.
Setup About the Setup There are a number of setup functions available in the TMI-M990. • For example, a sound is made when a switch is pressed, or a beep sound can be set ON/OFF when a command is received. In this way, you can change your preferred settings.
Setup BAND/ SETUP /FLAT /O/C VISUAL EQ /TILT /TILT OPEN/CLOSE / SETUP General Setup Operation To display the Setup screen: To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below. 1. Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2. Keep pushing the foot brake and release the parking brake once then engage it again. 3.
35-EN
Setup /FLAT /O/C /TILT /TILT Before perfoming each setting, please refer to “Setup menu chart” on page 33 and “GENERAL setup standard operation” on page 35. Adjusting Brightness ○ Adjust the brightness from –15 to +15 by pressing / TILT or / TILT. ○ ○ ○ ○ 1 ○ ○ Setting item: BRIGHT Setting content: –15 ~ +15 Adjusting Color of Picture / TILT ○ Adjust the color from –15 to +15 by pressing or / TILT.
Adjusting Tint of Picture / TILT ○ Adjust the tint from G15 to R15 by pressing or / TILT. ○ ○ • Tint adjustment cannot be made if a Navigation system with the RGB feature is connected. ○ ○ 1 ○ ○ Setting item: TINT Setting content: G15 ~ R15 Adjusting Display Contrast You can adjust the display contrast for better visibility. ○ Adjust the contrast from –15 to +15 by pressing / TILT or / TILT.
Setup Setting the Illumination Brightness When the lights are switched on at night etc., the switch and Input indicator brightness of the TMIM990 can be dimmed. Setting item: DIMMER Setting content: ON/OFF/AUTO ON: The switch and Input indicator brightness of the TMI-M990 change to the value set in “Adjusting the Illumination Level” (refer to page 39). OFF: The illumination brightness does not change.
Adjusting the Illumination Level The switch and Input indicator brightness of the TMI-M990 can be adjusted on the TMI-M990. For example, used when slighly adjusting the brightness while driving at night etc.. ○ ○ ○ ○ ○ ○ ○ The illumination dimmer level can be adjusted by pressing / TILT or / TILT. –2 ~ +2: When adjusting in a minus direction, the illumination becomes darker. When adjusting in a plus direction, the illumination becomes brighter. ○ ○ ○ 1 ○ ○ Setting item: DIMMER Lvl.
Setup /FLAT /O/C /TILT /TILT Before perfoming each setting, please refer to “Setup menu chart” on page 33 and “GENERAL setup standard operation” on page 35. Selecting the Monitor Opening Angle Setting item: SLIDE Setting content: BACK/FRONT • For details, see “Adjusting the Display Back and Forwards”, page 13. Adjusting the Monitor Viewing Angle ○ ○ Press / TILT or / TILT and adjust to an angle (10 levels) that is easily viewable.
Sound (Beep) Guide Function Setting item: BEEP Setting content: ON/OFF ON: Activate the Sound Guide mode. OFF: Deactivate the Sound Guide mode. The sound guide beep will not be produced when a button on the unit is pressed. Changing Lighting Color The illumination color of the switch and Input indicators of the TMI-M990 can be selected from one of three colors. Also, if connected with the IONBUS compatible head unit (DVI-9990), the head unit illumination color can be linked.
Setup BAND/ SETUP /FLAT /O/C VISUAL EQ /TILT /TILT OPEN/CLOSE / SETUP Before perfoming each setting, please refer to “Setup menu chart” on page 33 and “GENERAL setup standard operation” on page 35. Navigation Audio Interruption Volume Adjustment You can adjust the volume level of the voice guidance. Setting item: NAVI MIX LEVEL Setting content: + 7 (OFF, +1~+15) • Can only be set when an IONBUS compatible head unit is connected.
AUX IN/S-IN SETUP The following steps 1 to 6 are for the standard AUX IN/S-IN setup. For details on the setup item details, see each setting item. 3 Press / TILT or / TILT. The AUX IN 1, 2, 3 or S-IN SETUP screen is displayed. ○ Press OPEN/CLOSE / SETUP or VISUAL EQ, and select the preferred item setting from AUX IN 1, 2, 3 SIG. or S-IN SIG. When you press OPEN/CLOSE / SETUP, you move to the next item, press VISUAL EQ to move to the previous item.
○ ○ To return to the GENERAL SETUP screen, press / TILT or / TILT after selecting RETURN. To exit the setup, press and hold OPEN/CLOSE / SETUP for at least 2 seconds. ○ 6 ○ Change the setting by pressing ○ 5 ○ Press VISUAL EQ or OPEN/CLOSE / SETUP, and select the preferred item setting. When you press OPEN/CLOSE / SETUP, you move to the next item, press VISUAL EQ to move to the previous item. / TILT. To return to the GENERAL SETUP screen, select RETURN.
Name External Equipment to Be Displayed (AUX) When at least one external device is connected, you can name each as you like. Setting item: NAME Setting content: AUX-1, (2, 3)/DVD/VCR/GAME/TV*1/CAMERA*2 *1 To connect with a TV unit, refer to “TV Operation” page 46. *2 CAMERA is only displayed in AUX-3 mode. Set to camera when the back camera is connected. • Can be only when AUX IN 1, 2, 3 SIG. is ON.
TV (Optional) TV Operation When connected with a TV unit (sold separately), you can use the remote control supplied with the TMI-M990 to operate the TV. Set the AUX NAME to TV. Refer to (Setup “Name External Equipment to Be Displayed (AUX)” page 45). 1 1 2 3 4 5 46-EN Button Preset selection UP 2 Button Channel station selection DOWN Long press for automatic selection 3 Button Channel station selection UP Long press for automatic selection 4 Button Preset selection DOWN 5 DISP/A.
Switching the Source Operation is performed from an ALPINE IONBUS compatible head unit. 1 Press SOURCE/POWER. TUNER 2 AUX DVD Press BAND in AUX mode, and change the AUX mode.
Operating from the Head Unit Operating the Head Unit with the Remote Control The main unit can be operated with the remote control supplied with the head unit. • Remote control operation list RUE-4196 Operation explanation Page Channel selection etc. Press and hold for automatic channel selection. — * * Preset selection etc. — Auto memory — A.PROC. Switch display mode 17 Press and hold to access/exit the REAR SELECTOR screen.
Information In Case of Difficulty If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected, or then consult your authorized Alpine dealer. No function or display. • Vehicle's ignition is off.
Information Specifications MONITOR SECTION Screen Size LCD Type Operation System Number of Picture Elements Effective Number of Picture Elements Illumination System 7.0" Transparent type TN LCD Low temperature p-si TFT active matrix 1,152,000 pcs. (2,400 x 480) 99.
Installation and Connections Before installing or connecting the unit, please read the following and pages 3 to 5 of this manual thoroughly for proper use. Warning MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product damage. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc. BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.
Installation and Connections Caution Precautions • Be sure to disconnect the cable from the (–) battery post before installing your TMI-M990. This will reduce any chance of damage to the unit in case of a shortcircuit. • Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle's electrical system. USE SPECIFIED ACCESSORY PARTS AND • When making connections to the INSTALL THEM SECURELY.
Installation Installing the Monitor 2 Installation Location Screw Before deciding on the mounting location, check that opening and closing the display will not hamper gear shifting in that position. Hex Nut (M5) Bolt Stud TMI-M990 Metal Mounting Strap Ground Lead • Install at an angle of within 30 degrees from the horizontal. 1 Front Frame (Included) Wider edge should face down.
Installation and Connections 3 Installing the AV-Interface Unit When mounting the unit with the Velcro fasteners, be sure to choose a flat location. Do not hang the unit from the bottom of the dashboard or rear deck with the Velcro fasteners. 1 Lock Pin Slide the TMI-M990 into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver.
Parking Brake Lead Connection If necessary, use a pinch connector to connect the foot brake lead, parking brake lead, etc.
Installation and Connections Connections (TMI-M990 Wiring Diagram) 1 To IONBUS terminal 3 TMI-M990 2 o 4 1:SYSTEM REVERSE 5 (Orange/White) 1 2 To plus side of the back lamp signal lead of the car 2:STANDALONE PARKING BRAKE 6 (Yellow/Blue) FOOT BRAKE 7 To the foot brake (Yellow/Black) IGNITION 8 (Red) p BATTERY To the parking brake signal lead Ignition key 9 (Yellow) r GND q Battery (Black) p BATTERY 9 (Yellow) GND q Battery (Black) TMI-M990
1 IONBUS cable Used when setting up IONBUS compatible products. 2 IONBUS terminal Used when setting up IONBUS compatible products. 3 IONBUS cable (Included) 4 Power Supply Connector (Included) 5 Reverse Lead (Orange/White) Use only when a back-up camera is connected. Connect to the plus side of the car's reverse lamp that lights when the transmission is shifted into reverse (R). Switches the video picture to the back-up camera. This is linked with putting the car into reverse (R).
Installation and Connections System Example When Connecting External Equipment (If an IONBUS Compatible Head Unit is not connected) When the System Switch is set to “STANDALONE” NVE-N852A/NVE-N871A Navigation system (Sold Separately) 1 4 6 TMI-M990 AV-Interface unit To Video Input terminal 5 6 2 KAX-551N Amplified Speaker (Sold Separately) To Audio Input terminal Rear monitor 2 (Sold Separately) To Audio Input terminal 3 REMOTE IN (AUX2) (White/Brown) 7 REMOTE OUT (White/Brown) • When the NV
When Connecting External Equipment (When Connected to an IONBUS Compatible Head Unit) 59-EN
Installation and Connections 1 System Switch Change to “1:SYSTEM” when the TMI-M990 is connected with an IONBUS compatible head unit. When not connected to an IONBUS compatible head unit, change to “2:STANDALONE”. • Be sure to turn the power off to the unit before changing the switch position. 2 Power Supply Connector 3 AUX Video/Audio Output (AUX2) Terminal Use when connecting an optional monitor etc. 4 AUX Video/Audio Output (AUX1) Terminal Use when connecting an optional monitor etc.
When connecting Navigation System NVE-N852A/NVE-N871A Navigation system (Sold Separately) 1 TMI-M990 AV-Interface unit 2 • When the NVA-N751AS is connected for the Navigation System, use the RGB conversion cable KWE-503N (Sold separately). 1 RGB Cable (Included with NVE-N852, not included with NVE-N871A) 2 RGB Input Terminal Connect this to the RGB output terminal of the Navigation System. To prevent external noise from entering the audio system.
Installation and Connections Connecting an IONBUS compatible head unit, an IONBUS compatible Multimedia Manager and an Ai-NET compatible CD changer 3 IONBUS compatible head unit (sold separately) 1 t 6 (DVI-9990) 5 *1 2 p 7 *1 5 3 *1 *2 r e w *1 3 IONBUS compatible Multimedia Manager (sold separately) y 1:SYSTEM 1 2 3 2:STANDALONE (PXI-H990) 9 3 *1 Ai-NET/IONBUS CONVERTER (sold separately) 8 4 CD changer (Ai-NET) (sold separately) (CHA-S634, etc) 62-EN q (KCI-500B)
1 2 3 4 S Video Input Terminal Display Output Terminal IONBUS Terminal Ai-NET Connector Only an Ai-NET compatible CD changer, XM Radio Module can be connected. All other AiNET products are not compatible.
R LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below. This Warranty covers Car Audio Products and Related Accessories ("the product"). Products purchased in the Canada are covered only in the Canada. Products purchased in the U.S.