User Manual Alpine Navigation Navigation software for the Alpine INE-W957HD/X008U/X009 US English February 2014, ver. 1.
Thank you for choosing the Alpine INE-W957HD/X008U/X009 as your navigator. Start using your device right away. This document is the detailed description of the navigation software. You can easily discover the software while you are using it; however, we still recommend that you read this manual to fully understand the screens and features.
Table of contents 1 Warnings and Safety information .......................................................... 6 2 Getting started .......................................................................................... 7 2.1 Buttons and other controls on the screen........................................................ 8 2.1.1 Using keyboards ..................................................................................................9 2.1.2 Beyond single screen tap ................................
3.1.7 Entering the coordinate of the destination .........................................................43 3.1.9 Building a route from the list of destinations (Create Route) ............................44 3.2 Viewing the entire route on the map ............................................................. 45 3.3 Checking route parameters and accessing route related functions .............. 45 3.4 Modifying the route .......................................................................................
7 Copyright note ........................................................................................
1 Warnings and Safety information The navigation system helps you find your way to your destination with a connected GPS receiver. The software does not transmit your GPS position; others cannot track you. It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you operate your software before you start your journey. Plan the route before your departure and stop if you need to change the route.
2 Getting started When using the navigation software for the first time, an initial setup process starts automatically. Do as follows: 1. Select the written language of the application interface. Later you can change it in Regional settings (page 75). 2. Read the End User Licence Agreement. Tap 3. The Configuration wizard starts. Tap 4. Select the language and speaker used for voice guidance messages. Later you can change it in Sound and Warnings settings (page 75). 5.
7. The initial setup is now complete. The Configuration wizard can be restarted later from the Settings menu (page 65). After the initial setup, the Map screen appears and you can start using the software. 2.1 Buttons and other controls on the screen When you are using the software, you usually tap buttons on the touch screen.
Radio button When there are only a few Tap one of the buttons choices, radio buttons may be to select a new value. used instead of lists. Only one value can be selected. Switch When there are only two choices, a checkmark shows whether the feature is enabled. Slider When a feature can be set to different values in a range, the software shows an indicator on a gauge that displays and sets the value. Virtual keyboar d Alphabetic and alphanumeric keyboards to enter text and numbers.
Entering upper and lower case letters When entering a text, the first character appears in upper case while the rest of the text is in lower case. Tap to enter an upper case letter or tap twice to turn on Caps Lock. Tap again and lower case letters return. Entering symbols Tap to switch to a keyboard offering numeric and symbol characters. Finalising the keyboard entry (accepting the suggested search result) Tap Finalising the keyboard entry (opening the list of search results) . Tap . Tap .
Gestures (drag&drop) You need to drag and drop the screen only in cases like: • Moving the handle on a slider. • Scrolling the list: grab the list anywhere and slide your finger up or down. Depending on the speed of the sliding, the list will scroll fast or slow, only a bit or till the end. • Moving the map in map browsing mode: grab the map, and move it in the desired direction. 2.2 Map screen 2.2.1 Navigating on the map The Map screen is the most frequently used screen of the software.
The data fields are different when you are navigating an active route and when you have no specified destination (the orange line is not displayed). Default data fields when cruising without a destination (tap any of the fields to change its value): Field Description Shows your current speed given by the GPS receiver. Shows the speed limit of the current road if the map contains it.
2.2.2 Position markers 2.2.2.1 Vehimarker and Lock-on-Road When your GPS position is available, the software marks your current position with the Vehimarker. By default, this marker is a blue arrow, but you can change this icon in Settings. When on-road navigation is selected, the Vehimarker may not show your exact GPS position and heading. If roads are near, it is aligned to the nearest road to suppress GPS position errors, and the direction of the icon is aligned to the direction of the road.
2.2.3.2 Turn preview and Next street When navigating a route, the top section of the Map screen shows information about the next route event (manoeuvre) and the next street or the next city/town. There is a field in the top left corner that displays the next manoeuvre. Both the type of the event (turn, roundabout, exiting motorway, etc.) and its distance from the current position are displayed. Most of these icons are very intuitive. The following table lists some of the frequently shown route events.
Approaching the destination. These fields also act as buttons: • Tap the Turn preview field and the voice guidance will repeat the latest instruction with updated distance information. • Tap the Next street field to open the Itinerary. 2.2.3.3 Lane information and Signposts When navigating on multilane roads, it is important to take the appropriate lane in order to follow the recommended route.
2.2.3.5 Motorway exit services You may need a petrol station or a restaurant during your journey. This feature displays a new button on the map when you are driving on motorways. Tap this button to open a panel with the details of the next few exits or service stations. Tap any of them to display it on the map and add it as a waypoint to your route if needed. If you want to display other types of Places for the exits, you can change the icons in Visual Guidance settings (page 74). 2.2.3.
2.2.3.7 Elements of the active route Your software shows the route in the following way: Symbol Name Current GPS position and Start point Description Your current position displayed on the map. If roads are near, it is aligned to the nearest road. Normally if GPS position is available, the route starts from the current position. If there is no valid GPS position, your software uses the last known position as the start point.
In the first column you can see the number of traffic events on your route. The second column contains the full count of traffic events in the categories. Tap any of the even types to list the event in that category or select the top row to open the list of all traffic events: Now tap any of the list items to see its details, and to display the affected road segment in its full length on the map: 2.2.4 Manipulating the map Tap the map anywhere to browse it during navigation.
Zooming in and out Changes how much of the map is displayed on the screen. , Your software uses high-quality vector maps that let you examine the map at various zoom levels, always with optimised content. It always displays street names and other text with the same font size, never upside-down, and you only see the streets and objects that you need. Map scaling has a limit in 3D map view mode. If you zoom out further, the map switches to 2D view mode.
2.2.5 Checking the details of the current position (Where Am I?) This screen contains information about the current position (or about the last known position if GPS reception is not available) and a button to search for useful Places nearby. . You can access this screen from the map in one of the following ways: • If the current street is displayed below the Vehimarker (the current position on the map), tap it to open the Where Am I? screen. • In the Navigation menu, tap and then .
• : Police stations • : Petrol stations Tap any of the buttons, select a Place from the list, and navigate to it. 2.3 Navigation menu You can reach all parts of the software from the Navigation menu. When you open the menu, the destination search buttons appear on the screen. Tap any other menu button at the top and their feature buttons appear below.
3 On-road navigation When first started, Alpine INE-W957HD/X008U/X009 calculates routes using the road network of the high quality vector maps provided with the product. You can set up your route in different ways: • If you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation).
3.1.1.1 Entering an address To enter an address as the destination, do as follows: 1. In the Navigation menu, tap the following buttons: , . 2. By default, the software proposes the country and city/town where you are. If needed, , enter the first few letters of the country name on the tap keyboard, and select one country from the list of results. 3. If needed, select a new city/town: . a. Tap b. Start entering the name of the city/town on the keyboard. c.
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the street from the list. 4. 5. Enter the house number: a. Enter the house number on the keyboard. (To enter symbols, tap ). b. Tap to finish entering the address. (If the entered house number cannot be found, the midpoint of the street is selected as the destination.
Tip! If you know that you will use this destination frequently, before tapping to confirm the destination, put it in the Address Book first: tap then , give a name for the new entry, and tap to save the location. The map with the destination returns automatically. Now you can start your journey. 3.1.1.2 Entering the midpoint of a street as the destination You can navigate to the midpoint of a street if the house number is not available: , . 1. In the Navigation menu, tap the following buttons: 2.
4. Instead of entering the house number, tap the input field above. The midpoint of the street is selected as the destination. 5. After a short summary of the route parameters, the map appears showing the entire to modify route route. The route is automatically calculated. Tap parameters, or tap and start your journey. 3.1.1.3 Selecting an intersection as the destination To enter an address as the destination, do as follows: 1. In the Navigation menu, tap the following buttons: 2.
4. Instead of entering the house number, tap street is selected as the destination. 5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap and start your journey. 27 .
3.1.1.4 Selecting a city/town centre as the destination The city/town centre is not the geometric centre of the city/town but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of the important intersections. 1. In the Navigation menu, tap the following buttons: , 2. If necessary, modify the country as described earlier (page 23). 3. Select the destination city/town: a. Tap b.
3.1.1.5 Entering an address with a postal code All of the above address searching possibilities can be performed with entering the postal code instead of the city/town name. Find below an example with a full address: , 1. In the Navigation menu, tap the following buttons: 2. If necessary, modify the country as described earlier (page 23). 3. Enter a new city/town using its postal code: a. Tap b. Start entering the postal code. c. Find the city/town you need: • .
results before it appears automatically, tap the street from the list. 5. 6. ). Select Enter the house number: a. Enter the house number on the keyboard. (To enter symbols, tap ). b. to finish entering the address. (If the entered house Tap number cannot be found, the midpoint of the street is selected as the destination.) After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated.
• • After entering a couple of letters, tap contain the specified letters. to list the items that You can speed up finding an intersection: • Search first for the street with a less common or less usual name; fewer letters are enough to find it. • If one of the streets is shorter, search for that one first. You can then find the second one faster. • You can search for both the type and the name of a road.
3. After entering a few letters, tap to open the list of Places with names containing the entered character sequence. 4. (optional) The Places in the list are ordered by the length of the necessary detour (when navigating a route) or by their distance from the current position (when no . destination is given). If you need to reorder the list, tap 5. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle.
2. The preset search categories appear: • : • If an active route exists, petrol stations are searched along the route. • If there is no active route (destination is not selected), they are searched around the current position. • If the current position is not available either (no GPS signal), they are searched around the last known position. • : • If an active route exists, parking lots are searched around the destination of the route.
4. (optional) The Places in the list are ordered by their distance from the current or last known position, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 5. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen. 6. (optional) Tap to see the details of the selected Place. Tap to return to the map. 7.
3.1.2.3 Searching for a Place of Interest by category You can search for Places of Interest by their categories and subcategories. 1. In the Navigation menu, tap the following buttons: , 2. Tap 3. Select the area around which the Place should be searched for: . . • Tap to search around the current position or if it is not available, around the last know position. (The result list will be ordered by the distance from this position.) • Tap to search for a place within a selected city/town.
6. Select one of the Place subcategories (e.g. Hotel or Motel) or tap to list all Places in the selected main category around the selected location or along the route. 7. Sometimes the list of brands in the selected Place subcategory appears. Select one to list all Places in the selected subcategory around brand or tap the selected location or along the route. 8. Finally, the results appear in a list. 9.
12. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap to modify route and start your journey. 3.1.2.4 Searching for a Place of Interest by name You can search for Places of Interest by their names. You can search around different locations or along your route in the whole Place database or in one Place category or subcategory only. 1. In the Navigation menu, tap the following buttons: 2. Tap 3.
4. (optional) If you have selected 5. Select one of the main Place categories (e.g. Accommodation) to search in or tap , select the city/town to search in. to search among all Places. 6. Select one of the Place subcategories (e.g. Hotel or Motel) to search in or tap to search in the selected Place category. 7. Tap if you have not done it before. 8. Using the keyboard, start entering the name of the Place.
9. After entering a few letters, tap to open the list of Places with names containing the entered character sequence. 10. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 11. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle.
3. In the left field enter the name you are looking for. It can be a street address (just the street name or both the street and the house number), the name of a Place, a previous destination or an Address Book entry. 4. If you are searching in an area that is far from your current location, tap on the right field and enter a city name or a post code from the target area. 5. While you type, the number of matching items is displayed on the left broken down by category.
3. Tap the location that you want to select as your destination. The Cursor ( appears. ) 4. Tap 5. After a short summary of the route parameters, the map appears showing the entire to select the Cursor as the destination. to modify route route. The route is automatically calculated. Tap parameters, or tap and start your journey. 3.1.5 Selecting the destination from your Address Book You can select a location that you have already saved as an Address Book entry to be your destination.
3. Tap the entry that you want to set as your destination. If necessary, browse down to see more of the list or tap of the entry. 4. and enter a few letters from the name After a short summary of the route parameters, the map appears showing the entire to modify route route. The route is automatically calculated. Tap parameters, or tap and start your journey. 3.1.6 Selecting a recent destination from the History The destinations that you have set earlier appear in the History. 1.
3.1.7 Entering the coordinate of the destination You can also select a destination by entering its coordinate. Do as follows: 1. In the Navigation menu, tap . 2. Open the 3. You can enter the latitude and longitude values in any of the following formats: decimal degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds. 4. (optional) If necessary, tap the coordinate in UTM format. 5. When finished, tap 6.
3.1.9 Building a route from the list of destinations (Create Route) You can also build your route destination by destination from the Route menu. 1. In the Navigation menu, tap . 2. Tap 3. There is only one line in the list of route points, the start point of the route, normally the current GPS position. 4. Tap 5. The Destination menu appears and you can select the destination of the route the same way as described in the previous sections. 6.
7. To add more destinations, tap where you want to insert the new route point in the list, and repeat the above procedure. 3.2 Viewing the entire route on the map It is easy to get a map overview of the active route. Do as follows: 1. In the Navigation menu, tap . 2. Tap . The active route is displayed in its full length on the map together with additional information and controls. 3.
3. You have the following options on this screen (for detailed instructions on how to use them, see the next chapter): • Tap to edit the route: to add or remove destinations or change their sequence. You can also set a route start point other than your current location. This can be useful to plan and save a future trip. • Tap to display the entire route on the map. • Tap to bypass a part of the route. • Tap to delete the active route.
• Tap to plan a new route to the newly selected location. The previous destination and waypoint(s) are deleted. • Tap to add the newly selected location as an intermediate destination to your route. The other destinations of the route remain intact. Note: the new waypoint is placed among destinations to keep the route optimal. To decide where a waypoint to appear, use the Edit Route feature. • to append the newly selected destination at the end of the route.
4. The Destination menu appears and you can select the start point of the route the same way you select a destination. 5. When the new start point is set, tap 6. The map returns with a transparent Vehimarker (showing that there is no GPS reception). If an active route already existed, it is now recalculated starting from the selected location. 7. To return to normal navigation, tap . . 3.4.3 Editing the list of destinations (Edit Route) You can edit the route by modifying the list of destinations.
3. You have the following options: • Tap to add a new destination. • Tap to delete a destination. • Tap to modify the start point of the route. • Tap to reorder the list. You can do it manually or you can let the application optimise the route for you. 3.4.4 Cancelling the active route To cancel the navigated route, do one of the following: The link ed image cannot be display ed. The file may hav e been mov ed, renamed, or deleted. Verify that the link points to the correct file and location.
2. Tap . 3. You see the basic details of three route alternatives with the selected route planning method. Tap any of them to see it on the map. 4. Or if you cannot find a good alternative, tap routes with different routing methods. 5. to return to the Map Select one of the route alternatives then tap screen. The software recalculates the route. The orange line now shows the new recommended route. and scroll down for 3.4.
2. Tap and then tap one of the following: • • • • 3. The software recalculates the route optimised for the new vehicle type. The orange line now shows the new recommended route. 3.4.7 Changing the road types used in route planning To recalculate the active route with different road type preferences, do as follows. These changes can also be made in Settings. The link ed image cannot be display ed. The file may hav e been mov ed, renamed, or deleted.
• 3. - The software excludes unpaved roads by default: unpaved roads can be in a bad condition and usually you cannot reach the speed limit on them. to confirm the changes. The software recalculates the route. Tap The orange line now shows the new recommended route.
3.5 Saving a location as an Address Book entry You can add any location to the Address Book, the list of frequently used destinations. Planning a route to one of these destinations was described earlier. 1. Select a destination as described before. It can be an address, a Place, any location on the map, a previously used destination from History, a coordinate or a location where a photo was taken. 2. When the full screen map appears with the selected location in the middle, tap . 3. Tap . 4.
3.6 Saving a location as an alert point You can save any map location as an alert point (for example a speed camera or a railway crossing). 1. Browse the map and select a location. The red Cursor appears there. 2. Tap 3. Scroll down the list and tap 4. On the newly opened screen, select the type of the alert point, the direction from which you expect the alert, and (if applicable) the speed limit for this alert point. 5. Tap . . to save the location as a new alert point.
3.7 Editing an alert point You can edit a previously saved or uploaded alert point (for example a speed camera or a railway crossing). 1. Browse the map and select the alert point to edit. The red circle appears around the alert point. 2. Tap 3. Scroll down the list and tap 4. On the newly opened screen, modify the type of the alert point, the direction from which you expect the alert, or (if applicable) the speed limit for this alert point. 5. Tap . . to save the changes to the alert point.
3.8 Watching the simulation of the route You can run a simulated navigation that demonstrates the active route. Do as follows: 1. In the Navigation menu, tap . 2. Tap 3. Tap . The simulation starts from the starting point of the route, and using a realistic speed, it leads you through the whole recommended route. 1. (optional) You have the following controls during the simulation: . • : Jump to the next route event (manoeuvre). • : Pause the simulation.
2. Tap to stop the simulation.
4 Off-road navigation When first started, Alpine INE-W957HD/X008U/X009 calculates routes using the road network of the high quality vector maps provided with the product. You can switch the application to off-road mode in Navigation settings in one of the following ways: • From the Navigation menu, tap , and then . The link ed image cannot be display ed. The file may hav e been mov ed, renamed, or deleted. Verify that the link points to the correct file and location.
5 Reference Guide On the following pages you will find the description of the different concepts and menu screens of the software. 5.1 Concepts 5.1.1 Smart Zoom Smart Zoom provides much more than just a usual automatic zoom feature: • While following a route: when approaching a turn, it will zoom in and raise the view angle to let you easily recognise your manoeuvre at the next junction.
• Roads are used only if access for cars is allowed. • Private roads and resident-only roads are used only if they are inevitable to reach the destination. • Walkways are excluded from routes. • : • All manoeuvres are available in intersections. • Directional constraints are taken into account the way that opposite direction is allowed with a low speed. • A private road is used only if the destination is there. • Walkways are excluded from routes.
5.1.3 Green routing Route calculation is not only about finding the quickest or shortest route. For some of the vehicle types, you can also check the fuel consumption and CO2 emission when planning a route, and you can create cost effective routes with less effect on the environment. In Route settings, you can edit the parameters of the selected vehicle. Enter the fuel consumption values and the price of the fuel.
You can also choose to see the speed limit sign on the map all the time. 5.1.5 Traffic information in route planning The recommended route is not always the same between two points. Offline statistical traffic information (historical speed information or traffic patterns) can be taken into account in the route calculation based on the time of day and the day of week whenever suitable data exists.
Tap to open the list of traffic even categories : In the first column you can see the number of traffic events on your route. The second column contains the full count of traffic events in the categories. Tap any of the even types to open the list of traffic events or tap the first line to show all events: Now tap any of the list items to see its details, and to display the affected road segment in its full length on the map: 5.
Button Description Tap this button to get information about the current location and to find nearby help. Tap this button to open the GPS Information screen with satellite position and signal strength information. If you save your trip logs when you arrive at some of your destinations or let the application automatically save the trip logs for you, those logs are all listed here. Tap one of the trips to see the trip statistics, speed and altitude profile.
Select a country from the list and see useful driving information about the selected country. Information may include speed limits on different road types, the maximum blood alcohol level and any compulsory equipment you need to show when stopped by the police. 5.3 Settings menu You can configure the program settings, and modify the behaviour of the software. In the Navigation menu, tap . The Settings menu has several options. Tap or scroll with your finger to see the full list.
Button Description Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. Enable different sounds and alerts in the application. The recommended route is not always the same between two points. Whenever suitable data exists, traffic information can be taken into account in the route calculation. These settings determine how routes will be calculated.
5.3.1 Sound and Warnings Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. Button Description Tap this button to adjust the volume of the different sounds in the application. A new screen shows the different sound types and their controls. See below for details. This button shows the current voice guidance profile.
Maps may contain information about the speed limits of the road segments. The software is able to warn you if you exceed the current limit. This information may not be available for your region (ask your local dealer), or may not be fully correct for all roads in the map. This setting lets you decide whether you wish to receive visible and/or audible warnings. Adjust the slider to set the relative speed above which the application initiates the warning.
5.3.3 Traffic settings The recommended route is not always the same between two points. Whenever suitable data exists, traffic information can be taken into account in the route calculation. Button Description Use this switch to enable or disable historical traffic data and traffic patterns. This locally stored information can be very useful in normal circumstances but for example on public holidays it may be better to turn off in order not to take into account normal weekday traffic jams.
screen, and the part of the route not matching your preference will be displayed in a different colour on the map. In the list of road types you can see in how many segments and what total length of the road type is used in the current route. Button Description You might need to avoid motorways when you are driving a slow car or you are towing another vehicle. Charge roads are pay roads where you can purchase a pass or vignette to use the road for a longer period of time.
Enter the average consumption of your vehicle when used in built-up areas. The unit for consumption can be set in Regional Settings. Enter the average consumption of your vehicle when used on highways. The unit for consumption can be set in Regional Settings. Select the engine and fuel type of your vehicle. This helps in estimating the CO2 emission. Enter the average fuel price for travel cost calculation. The currency can be set in Regional Settings. Set the maximum speed you travel with the vehicle.
• Roads are used only if access for taxis is allowed. • Private roads, resident-only roads and walkways are excluded from routes. Route Planning Method types: Button Description Gives a quick route if you can travel at or near the speed limit on all roads. Usually the best selection for fast and normal cars. Gives a short route to minimise the distance to travel. It can be practical for slow vehicles.
Button Description Switch the map view between a 3D perspective view and two 2D topdown view modes. Adjust the basic zoom and tilt levels to your needs. Three preset levels are available. There is also a manual mode when you can set the zoom and tilt levels with the buttons on the left. When selected, the map zooms out to show an overview of the surrounding area if the next route event (manoeuvre) is far. When you get close to the event, the normal map view returns.
5.3.6 Visual guidance settings Adjust how the software helps you navigate with different kinds of route related information on the Map screen. The data fields in the corner of the Map screen can be customised. Tap this button and select the values you want to see. The values can be different when you navigate a route from when you are just cruising without a given destination.
Similar to the above possibility, alternative routes can be suggested when driving on normal roads. The software will select a different turn in the upcoming intersection and offers you a different route for the next section of the route. Your options are the similar as above but you cannot modify the offered detour. Parking at the destination may not be easy in city areas. As you approach the destination, the software can offer parking category Places near your destination.
5.3.8 Trip monitor settings Trip logs contain useful information about your trips. Trip logs can be saved manually when you reach your destination or you can turn on the automatic saving here. You can access these logs in the Trip monitor. Trip monitor is available from the More menu. This is not a button. This line shows the current size of the trip database, the sum of all trip and track logs saved. Trip monitor can record statistical data of your trips.
6 Glossary 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
Route A sequence of route events, i.e. manoeuvres (for example, turns and roundabouts) to reach the destination. The route contains one start point and one or more destinations. The start point is the current (or last known) position by default. If you need to see a future route, the start point can be replaced with any other given point. Heading-up map orientation In this mode the map is rotated so its top always points in the current driving direction. This is the default orientation in 3D map view mode.
7 Copyright note The product and the information contained herein are subject to change without prior notification. This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Alpine Electronics, Inc. © 2014 - Alpine Electronics, Inc All rights reserved. © 2014 NNG Kft. All rights reserved. Map data: © 1987 - 2014 HERE. All rights reserved. see http://corporate.navteq.
