R 8-INCH ADVANCED NAVI STATION EN X008U 7-INCH ADVANCED NAVI STATION INE-W957HD FR ES This HD Radio receiver enables: • OWNER’S MANUAL Please read before using this equipment. • MODE D’EMPLOI Veuillez lire avant d’utiliser cet appareil. • MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. Thank you for purchasing this Alpine product. Please take a moment to protect your purchase by registering your product now at the following address: www.alpine-usa.com/registration.
ALPINE ELECTRONICS MARKETING, INC. 1-7, Yukigaya-Otsukamachi, Ota-ku, Tokyo 145-0067, JAPAN Phone: 03-5499-4531 ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 161-165 Princes Highway, Hallam Victoria 3803, Australia Phone 03-8787-1200 ALPINE ITALIA S.p.A. Viale C. Colombo 8, 20090 Trezzano Sul Naviglio (MI), Italy Phone 02-484781 ALPINE ELECTRONICS FRANCE S.A.R.L. (RCS PONTOISE B 338 101 280) 98, Rue de la Belle Etoile, Z.I. Paris Nord Il, B.P.
ENGLISH Contents Common Operations Using My Favorites .........................................20 Operating Instructions PRECAUTIONS IMPORTANT INFORMATION ....................... 8 WARNING Points to Observe for Safe Usage ..................... 8 WARNING ................................................. 9 CAUTION .................................................. 9 NOTICE ................................................... 10 Discs Playable on This Unit .................
CD/MP3/WMA/AAC Playback .......................................................... 34 Repeat Play ..................................................... 34 M.I.X. (Random Play) .................................... 34 Selecting Folders (Concerning MP3/WMA/ AAC) ........................................................... 35 Searching from CD Text ................................. 35 File/Folder Name Search (Concerning MP3/ WMA/AAC) ................................................ 35 About MP3/WMA/AAC .........
Sound Setup Sound Setup Operation ................................... 48 Setting the Balance/Fader/Subwoofer ............ 49 Setting the Balance/Fader ............................ 49 Rear Speaker Setting ................................... 49 Turning Subwoofer ON/OFF ...................... 49 Adjusting the Subwoofer Level ................... 49 Setting the Subwoofer Phase ....................... 49 Setting the MX (Media Xpander) ................... 49 Equalizer Presets ......................................
Hands-Free Phone Control Connecting a Bluetooth Device ...................... 67 Disconnecting the Bluetooth Connection ............................................... 67 Changing the connecting Bluetooth Device .......................................................... 68 Answering a Call ............................................ 68 Adjusting ringtone volume .......................... 68 Hanging up the Telephone .............................. 68 Calling ..................................................
Playing the iDataLink SiriusXM .................... 85 Flash Memory (Optional) Playback .......................................................... 86 Repeat Play ..................................................... 87 Random Play (M.I.X.) .................................... 87 Random Play (M.I.X. ALL) ........................... 87 Searching for a Desired Song ......................... 87 File/Folder Name Search ............................. 87 Tag Search .................................................
Operating Instructions PRECAUTIONS IMPORTANT INFORMATION PLEASE READ CAREFULLY BEFORE USING THIS PRODUCT This product is intended to provide turn by turn instructions to get you to a desired destination. Please make certain that all persons using this navigation system carefully read these precautions and the following instructions fully. • This product is not a substitute for your personal judgment.
DO NOT DISASSEMBLE OR ALTER. WARNING • Operation of the system while driving is dangerous. Users should stop vehicle before operating the software. • Road conditions and regulations take precedence over information contained on the map display: observe actual traffic restrictions and circumstances while driving. • This software is designed for use exclusively in the X008U/INE-W957HD. It cannot and may not be used in conjunction with other hardware. WARNING This symbol means important instructions.
NOTICE Product Cleaning Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic. Temperature Be sure the temperature inside the vehicle is between +45°C (+113°F) and 0°C (+32°F) before turning your unit on. New Discs To prevent the disc from jamming, “Disc error” is displayed if discs with irregular surfaces are inserted or if discs are inserted incorrectly.
Discs Playable on This Unit Disc Accessories There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause operational problems. We recommend not using these accessories on discs played in Alpine DVD players. Transparent Sheet Playable Discs The discs listed below can be played on this unit.
Discs that cannot be played Tips for making your own discs DVD-ROMs, DVD-RAMs, CD-ROMs (excluding MP3/WMA/ AAC files), photo CDs, etc. The X008U/INE-W957HD plays DVD Video, DivX®, Audio CD and has a built in MP3/WMA/AAC decoder. DualDisc This unit is not compatible with DualDisc. Using a DualDisc may cause unit malfunction, and may cause disc damage when the disc is inserted/ejected. DVD region number (playable region number) This DVD player will play back any disc whose region number is 1 (or All).
Using DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs • This unit is compatible with discs recorded in the standard DVD-Video format. • Note that discs not finalized (processed to enable to play on playback-only DVD players) cannot be played on this DVD player. • Some discs may not play back, depending on the recording device and disc format. • Discs or files utilizing copy protection, may not be playable. Some recording systems may not properly format copied files to enable proper playback.
• This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Features Auto user setting change With the X008U/INE-W957HD, you can register up to two users. Each user can configure their own preferred settings. By registering their respective Bluetooth devices to the unit, each user can be identified automatically. USER1 USER2 USER2 USER1 • • • • For details of how to register a Bluetooth device, refer to “User Registration” (page 21). If USER2 is recognized while USER1 is using the system, a confirmation message is displayed.
Easy sound setting by car type (i-Personalize) This function lets you set the best audio environment for your car. On the unit, select and set the car category/steering wheel position/speaker type and size/seat material. For details of how to configure the settings, refer to “Car Specific Sound Setup” (page 23). Display example when setting is completed About Dual Screen If you want to display the music playback screen while route guidance is displayed, etc.
Dual Screen Display Position You can switch the Audio/Visual and Navigation screens using drag & drop. To switch the screens, touch the middle of the Audio/Visual screen and drag it to the navigation screen. The screens will switch positions when you remove your finger. • Drag and drop the navigation screen will change to navigation full screen.
Press and hold this button for at least 3 seconds to activate the “Easy Sound Setup” mode (page 24). You can select this menu to be displayed on the left or right of the screen. For details, refer to “Setting the Easy Sound Setup Position” (page 55). Getting Started (MAP) button Accessory List • • • • • • • • • • • • • • • • • Recalls the navigation map screen. Press again to switch to Navigation menu screen. Press and hold this button for at least 3 seconds to change to Go Home route screen.
Turning the System On With the Alpine system, when the ignition key is turned to ACC or ON, the opening screen will be automatically displayed. 1 When the system is used for the first time, the language selection menu is displayed. There are 24 languages to choose from. Touch [ ] or [ ] to scroll the list, and then touch the desired language. Inserting/Ejecting a Disc Inserting the Disc 1 Press c (Eject). The Open/Tilt screen is displayed. 2 3 Touch [c Disc].
Adjusting the Screen Viewing Angle Common Operations Adjust the screen’s angle for better visibility. 1 Using My Favorites Press c (Eject). The Open/Tilt screen is displayed. 2 Touch [ Up] or [ Down] of “Tilt” to adjust the desired screen angle. Display example of My Favorites screen The screen angle can be adjusted in 5 stages. 3 Touch [ ] to return to the normal mode. • The screen color will vary when viewed at certain angles. Adjust the screen angle for the best viewing position.
5 Touch [Search]. User Registration You can register up to two users. Configure the User1 and User2 settings for each user. 1 Press the (My Favorites) button. The My Favorites screen is displayed. • You cannot access My Favorites screen while driving. 2 The system starts searching for Bluetooth devices. When the search is completed, the Bluetooth Device List is displayed. • Set the Bluetooth setting on the preregistered Bluetooth device side to [ON]. Touch [Start].
[SiriusXM] : You can register presets No. 1-6 in SiriusXM1, SiriusXM2 and SiriusXM3. Select presets No. 1-6 from SiriusXM1 preset/SiriusXM2 preset/SiriusXM3 preset. [Disc]/[USB/iPod]/[iDataLink USB/iPod]/[HDMI]/[Pandora]/ [Bluetooth Pandora]/[iDataLink SiriusXM]/[AUX 1]/ [AUX 2]/[AUX 3]/[Bluetooth Audio]/[iDataLink Bluetooth Audio] : You can switch directly to any of these audio sources. Setting My Favorites Configure the My Favorites settings. Press the (My Favorites) button.
Changing the User Name 1 Touch the [Name] of the current user. Displaying the Camera Image The Input User Name screen (Keypad) is displayed. 2 Input the name and touch [OK]. The user name is changed. • For details of how to input characters using the keypad, refer to “How to Input Characters and Numbers (Keypad)” (page 27). Changing a Bluetooth device You can change the Bluetooth devices associated with the user. 1 Touch the [Phone]. The Bluetooth Device Setup screen is displayed.
6 Select the installation position of the rear speaker. If you select “No rear speaker”, you cannot adjust the rear speaker in Time Correction/X-Over in sound setup. 7 Select whether or not there is a subwoofer. If you select “No”, you cannot adjust the subwoofer level/ subwoofer phase in sound setup. 8 Select the material of the car seats. The settings confirmation screen is displayed. • If the car seats are made of both leather and fabric, select [Half leather]. 9 Check the settings and touch [OK].
• You can set this item via TuneIt App on a Smartphone. Refer to “Adjusting the sound via the Smartphone” on page 25. Select the Desired BASS ENGINE Type You can select your preferable BASS ENGINE type within Standard (Initial setting)/Punch/Rich/Mid Bass/Low Bass. Adjusting the BASS ENGINE Level With BASS ENGINE SQ ON, adjusting the Bass Level uniformly effects various sound parameters for optimum Bass effect. • Adjustable only when Defeat is Off.
Display example for Notification incoming screen Touch Poster’s picture or Poster’s name to switch to Facebook screen. The details information of Notification is displayed. • Touch [ ] to return to previous screen. • Depending on the status, contents of message and photo may not be displayed. • A new received Notification prompt will last for 15 seconds. If there is no operation within 15 seconds, the unit will return to normal mode.
Settings When Switching Users The functions/settings that are affected when switching users are as shown below. Item My Favorites User Registration 21 Setting My Favorites*1 22 Displaying the Camera Image*2 HD Radio/RBDS Displaying Radio Text General Setup Sound Setup Source Setup Hands-Free Phone Control Camera Operation Ref. page Character input is required for user registration, place searches, etc.
Top banner and Bottom banner Fade Out Setting When “Top/Bottom Banner Fade Out” is set to ON, the Top banner and Bottom banner on the Audio/Visual Playback screen fade out after 5 seconds if no operation is performed. To display the keys again, touch the middle of the screen. Switching Sources During audio/visual playback, press the button or touch a source button in the top banner to switch to the desired source. Switching Sources Using the During audio/visual playback, press the to the desired source.
Rear Entertainment Function Full Screen The rear entertainment function independently routes different sources to the front and the rear inside a car. For example, while listening to the radio or other audio source in the front, DVD can be enjoyed in the rear with the optional rear monitor and headphones. 1 2 Press the button. Touch [Rear]* of Top banner. Rear source Select display appears. * Displayed only when Rear Seat Entertainment (RSE) is On (page 60).
About the Indicator Display The Indicator Bar at the bottom of the screen displays various types of information, like the current time. The display will differ depending on the source. For details, refer to the display example of each source. Lights up when connected to a Bluetooth compatible device. (Does not display when connection is set to OFF.) : Bluetooth connection to audio device : Bluetooth connection to Hands Free Phone Blinks while reconnecting.
Radio/HD RadioTM/ RBDS X008U/INE-W957HD can receive HD Radio signals based on digital radio broadcast standards in addition to analog radio broadcasts using RBDS. HD Radio signals are broadcast in the service areas of the current AM/ FM broadcasters where they provide digital audio distribution and data services. This unit receives the above digital broadcasts for your highquality sound enjoyment.
• If a preset memory has already been set in the same preset number, it will be cleared and the new station will be memorized. Presetting Stations Automatically The tuner can automatically seek and store 6 strong stations in the selected band in order of signal strength. After selecting the desired band, touch [A.Memo] of Bottom banner. The tuner automatically seeks and stores 6 strong stations into the preset buttons in order of signal strength.
Displaying Radio Text Text messages from a radio station can be displayed. 1 2 Tune in a radio station that transmits text messages. Touch [Info] in the bottom banner in FM radio mode repeatedly to switch to the desired display. HD Radio Station Info Mode (Station Name/Frequency/Song Name) Song Info Mode (Station Name/Song Name/Artist Name/ Album Name) • During tagging, the iPod/iPhone takes priority to save the tag information. If no iPod/iPhone is connected, the tag information is saved to this unit.
CD/MP3/WMA/AAC Display example for MP3/WMA/AAC main screen Info mode Touch [ / ] again or touch [ screen to start playback. ] in the middle of the • The X008U/INE-W957HD can play back MP3/WMA/AAC files saved to CD or DVD. Use a format compliant with this unit. For further information about playing or storing MP3/WMA/AAC files, refer to pages 35 and 36 before using the unit. • Any file protected by DRM (Digital Rights Management) copy protection, cannot be played back on this unit.
Selecting Folders (Concerning MP3/WMA/AAC) Touch [ folder. ] or [ ] of Bottom banner to select the Searching from CD Text 1 Touch [ (Search)] of Bottom banner during playback. The CD text search screen is displayed. 2 Touch the selected track name. The selected track will be played back. • For details on how to scroll through the list, refer to “Selecting an Item in a List” (page 29). File/Folder Name Search (Concerning MP3/WMA/AAC) 1 Touch [ (Search)] of Bottom banner during playback.
Supported playback sampling rates and bit rates Order of files Files are played back in the order that the writing software writes them to the disc. Therefore, the playback order may not be what’s expected. Verity the writing order in the software’s documentation. The playback order of the folders and files is as follows. (The following numbers may differ from actually displayed numbers.) MP3 Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.
The DVD operation screen display DVD Touch the screen while the DVD playback screen is displayed. The DVD operation screen is displayed. Display example for DVD Video main screen Touch [<<], [>>] • The operation screen changes to the visual screen in the DVD mode for 5 seconds after an operation has been performed. • If you try to activate the DVD while driving, the display will show the warning-Picture off for your safety.
2 • Play Position Memory Function Even if you turn power off or switch the Ignition key to OFF during playback or change the source, playback will continue from the point where playback stopped when the power is turned ON again. 1 2 Press the Select a desired menu item by touching [ [ ] or [ ]. ], [ ], button. Touch [Disc] of Top banner. The display shows the Disc mode screen. Or insert a disc with the label side facing up. The unit starts to play the disc.
Displaying the Top Menu Screen Fast-forwarding/Fast-reversing When a DVD contains two or more titles, the top menu screen appears. Touch [TOP MENU] of Bottom banner. 1 The top menu screen appears. • To perform necessary operations, refer to “If a Menu Screen Appears” (page 38). DVD-Video: Touch and hold for more than 1 second to forward/reverse at double speed. Every time you touch [ ]/[ ] during fast- reverse/fastforward, the speed changes as follows: 2x 8x 32x 2x.
Playing Still Frames (Pausing) 1 2 During playback, touch [ Touch [ / ] or [ resume playback. / ] of Bottom banner. ] in the middle of the screen to Selecting Folders Touch [ folder. ] or [ ] of Bottom banner to select the • Touch [ Touch [ ] to play from the first file of the previous folder. ] to play from the first file of the next folder. • No sound is played during the still frame mode. • The image or sound may stop temporarily when playback starts from the pause mode.
Searching by Title Number Use this function to easily find positions on the DVD using the DVD’s titles. Perform operations while playback is stopped. 1 Touch [10KEY] of Bottom banner. The numeric keypad input mode screen appears. If [10KEY] is not displayed, touch [<<] in the bottom banner to display [10KEY]. • For DVD Video, the numeric keypad can also be displayed by touching [Menu Control] of Bottom banner and then touching [Key] twice. 2 Enter a desired title by touching its number.
Switching the Audio Tracks About DivX® DVDs with multiple audio tracks or languages allow switching the sound during playback. DivX® is a codec (software) to compress moving images while maintaining image quality using a highly advanced compression ratio and operating speed. Touch [AUDIO] of Bottom banner. The sound switches between the alternate audio tracks recorded on the disc every time the button is touched. If [AUDIO] is not displayed, touch [<<] in the bottom banner to display [AUDIO].
2 Setup Touch [General]. Setup Operation Touch the [SETUP] icon on the Audio/Visual Playback screen to display the Setup main screen. [SETUP] icon The General Setup screen appears. 3 Select the desired item.
• The iDataLink source icons not displayed on the top banner when no iDataLink module is connected even though “Both” or “OEM” is set. Setting the Hands-free Connection Select to pair the Bluetooth compatible phone with this unit or the connected iDataLink module. Setting item: Hands-free Connection Setting contents: OEM / Aftermarket (Initial setting) Select to pair the Bluetooth compatible phone with the connected iDataLink module.
Screen/LED Customize Touch [Screen/LED Customize] on the General setup menu in step 3. Refer to “General Setup Operation” (page 43). Adjusting the Touch Panel Adjustment becomes necessary when the display position on the LCD and the touch position on the touch panel do not match. Setting item: Screen Alignment Setting the Brightness of the Backlighting Backlighting is provided by a fluorescent light built into the liquid crystal panel.
2 Touch [ ] of the desired item. Adjusting the Live Contrast Settable items differ depending on the application. [Video] (Video media): Display Mode / Live Contrast / Visual EQ / Brightness / Color / Tint / Contrast / Sharp [Direct Camera]*: Live Contrast / Brightness / Color / Contrast This function automatically adjusts the areas on the screen that are too bright or too dark and corrects them to natural brightness.
Adjusting Image Contrast Setting item: Contrast Setting content: -15 to +15 (Initial setting: 0) You can adjust the contrast between LOW (-15) and HIGH (+15). When it reaches the minimum or maximum point, the display shows “LOW” or “HIGH” respectively. Checking the DivX® Registration This unit will display the registration code required to play a DivX® VOD (Video On Demand), or you can also display the deregistration code.
Installation Setup [Installation] is selected on the General setup menu in step 3. See “General Setup Operation” (page 43). Setting item: Installation Sound Setup Sound Setup Operation The Installation check screen is displayed. To display the Sound Setup Menu screen: Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake.
*1 These items cannot be adjusted when External Audio Processor is set to On, refer to “Setting the External Audio Processor On/ Off” (page 48). *2 This item cannot be adjusted when Optical is set to On, refer to “Setting the Digital Output” (page 48). 4 Touch [ ] or [ Touch [ If an optional subwoofer is connected to the unit, make the following setting. ] etc., to change its setting. • When the pop-up window for setup is displayed, touch [ close the window after setting.
2 Touch any of [ Media ][ ][ ][ ]. Level OFF 1 2 3 SiriusXM DVD CD Compressed Media Pandora AUX/AUX3 HD Radio HDMI iDataLink • The MX setting can be performed only when a source is currently selected. • MP3/WMA/AAC/iPod/USB/DivX®/Bluetooth Pandora/Bluetooth Audio correspond to MX Compressed Media. MX SiriusXM The medium to high frequencies become more clear, and produces well balanced sound in all the bands. Equalizer Presets [EQ Presets] is selected on the Sound setup menu in step 3.
Adjusting the Frequency Touch [ ] or [ ] of “Freq.” to adjust the frequency of the selected band. Adjusting the Time Correction (Time Correction) Adjustable frequency bands: 20 Hz to 20 kHz (in 1/3 octave steps) Band1: 20 Hz~100 Hz (63 Hz) Band2: 63 Hz~315 Hz (125 Hz) Band3: 125 Hz~500 Hz (250 Hz) Band4: 250 Hz~1 kHz (500 Hz) Band5: 500 Hz~2 kHz (1 kHz) Band6: 1 kHz~4 kHz (2 kHz) Band7: 2 kHz~7.2 kHz (4 kHz) Band8: 5.
Adjusting the Crossover Settings (X-Over) [X-Over] is selected on the Sound setup menu in step 3. Refer to “Sound Setup Operation” (page 48). Before performing the following procedures, refer to “About the Crossover” (page 54). Setting item: X-Over 1 Touch [Channel] to select the channel. Each time you touch, the channel switches. 4 To store the adjusted setting value, touch and hold [Preset1], [Preset2], or [Preset3] for at least 2 seconds. • Touch [Flat] to initialize all values.
About Time Correction Example 2. Listening Position: All Seats Adjust the time correction level of each speaker to almost the same level. The distance between the listener and the speakers in a car vary widely due to the complex speaker placement. This difference in the distances from the speakers to the listener creates a shift in the sounds image and frequency characteristics. This is caused by the time delay between the sound reaching the listener’s right versus the left ear.
4.1 139.4 54.9 9.2 312.8 123.3 4.2 142.8 56.3 9.3 316.2 124.6 4.3 146.2 57.6 9.4 319.6 126.0 4.4 149.6 59.0 9.5 323.0 127.3 4.5 153.0 60.3 9.6 326.4 128.6 4.6 156.4 61.6 9.7 329.8 130.0 4.7 159.8 63.0 9.8 333.2 131.3 4.8 163.2 64.3 9.9 336.6 132.7 4.9 166.6 65.7 5.0 170.0 67.0 About the Crossover Crossover (X-Over): This unit is equipped with an active crossover. The crossover limits the frequencies delivered to the outputs.
Source Layout Setting Source Setup [Source Layout] is selected on the Source setup menu in step 3. Refer to “Source Setup Operation” (page 55). Source Setup Operation To display the Source Setup Menu screen: Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Keep pushing the foot brake and release the parking brake once then engage it again.
Disc Setting Touch [Disc] on the Source setup menu in step 3. Refer to “Source Setup Operation” (page 55). • You can perform DVD setup in DVD video mode. • Touch [Stop] before performing Disc setup. Changing the language setting The audio language, subtitle language and menu language can be set according to your preferences. Once set, this becomes the default language. This function is convenient if you always want to listen in English, for example. (The language setting is not effective on some discs.
Set the rating level of Parental Controls 4 Touch [Parental]. 5 Touch [ ] or [ ] to turn “On”. Select “Off” to cancel parental lock or if you do not want to set a rating level. 6 Touch [ ] to return to the previous screen. 7 Touch [Parental Level] 8 Touch [ ] or [ ] to select the rating level (1 to 8). The smaller the number, the higher the restriction. 9 Touch [ ] to return to the previous screen. 4:3 PAN-SCAN: Select this when connected to a conventional 4:3 size monitor.
SiriusXM Setting [SiriusXM] is selected on the Source setup menu in step 3. Refer to “Source Setup Operation” (page 55). Setting ON/OFF of all Songs/Artists/Games Alert This menu option allows you to temporarily disable the Artist/Song/ Game Alerts for all Artists/Songs/Games. When the Alerts are re-enabled, individual Artist/Song/Game Alert disabled in the Alert List menu setting remain disabled. 1 2 Touch [Alert]. Touch [ ] or [ ] of the Alert to select ON/OFF.
Setting the Parental Lock You can lock out channels with passcode protection. Channels that are locked cannot be accessed without entering the passcode. You can unlock a channel or change the passcode using this menu option. Changing the Lock Passcode 4 The numeric keypad screen is displayed. 5 Setting item: Parental Lock 1 Touch the numeric keypad to input a 4-digit passcode. The initial default 4-digit passcode is set to 0000. After entering the digit, it is displayed as “*” (asterisk).
Auxiliary (AUX) Setting [Auxiliary (AUX)] is selected on the Source setup menu in step 3. Refer to “Source Setup Operation” (page 55). Setting the Auxiliary (AUX) Mode Setting item: AUX 1 In Setting contents: Off / On (Initial setting) Off: On: AUX source is not displayed. AUX source is displayed. Setting the AUX3 Connection with external input devices is available through the iPod VIDEO connector. An optional adapter cable is required (standard RCA to 3.5ø mini-phono plug or 3.5ø to 3.
Setting the Bluetooth Pandora® [Bluetooth Pandora] is selected on the Source setup menu in step3. Refer to “Source Setup Operation” (page 55). To use Bluetooth Pandora, set the Bluetooth Pandora setting to “On.” Bluetooth Setup Bluetooth Setup Operation Setting item: Bluetooth Pandora Setting contents: Off / On (Initial Setting) • When “On” is set, the Bluetooth Pandora® source is displayed on the Top banner on the Audio/Visual screen.
5 Touch [ ] to return to the previous screen. • Immediately after changing the Bluetooth Setup (while the system is writing data automatically) do not turn the ignition key to OFF. Otherwise, the settings may not be changed. • For details on how to scroll through the list, refer to “Selecting an Item in a List” (page 29). Setting Hands-free Connection of iDataLink [Hands-free Connection of iDataLink] is selected on the Bluetooth setup menu in step 3.
Automatic Connection setting Selecting the Output Speaker [Auto Connect] is selected on the Bluetooth setup menu in step 3. Refer to “Bluetooth Setup Operation” (page 61). If the Automatic Connecting setting is “On”, automatic connection is performed for the audio device registered in the Paired Device list. [Phone Speaker] is selected on the Bluetooth setup menu in step 3. Refer to “Bluetooth Setup Operation” (page 61). You can select which speaker in the car will output the audio from the phone.
Direct Camera Setting Camera Setup [Direct Camera] is selected on the Camera setup menu in step 3. Refer to “Camera Setup Operation” (page 64). Camera Setup Operation With an optional camera connected, its video is output to the monitor. When the camera is connected, set this item.
Display example for front camera mode AUX Camera Setting [AUX Camera] is selected on the Camera setup menu in step 3. Refer to “Camera Setup Operation” (page 64). Setting the Camera Input Setting item: Camera Select / Camera Signal*1 / Guide Adjustment*1 Setting contents: Off / Rear*2 (Initial setting) / Other 4 Rear: Other: Touch [ ], [ ], [ the guide. ] or [ ] to adjust the position of • Touching [Clear] clears adjustments and returns to the setting before guide line alteration.
Turning guide display ON/OFF Turning the selected guide off. 1 Touch [ON/OFF]. The currently selected guide will turn off. 2 To turn the guide on, touch [ON/OFF] again. • Guides that are turned off are still adjustable. Returning guides to default. 1 Touch [Default]. A message window will appear. 2 Touch [OK]. Adjusted values will return to default settings. Camera Interrupt Setting (Power OFF Mode) [Camera Interrupt] is selected on the Camera setup menu in step 3.
Bluetooth Operation Setup Before Using About Bluetooth Bluetooth is a wireless technology allowing communication between a mobile device or personal computer over short distances. This enables a hands-free call or data transmission between Bluetooth compatible devices. Bluetooth transmission is available in the unlicensed 2.4 GHz spectrum if the distance between devices is within 10 meters. For details, refer to the Bluetooth website (http://www.Bluetooth.com/).
Changing the connecting Bluetooth Device If multiple Bluetooth devices are registered in this device, you can change the connection among the registered devices. 1 (PHONE) button. Press the The Phone menu screen is displayed. 2 Touch [Change]. The Set Bluetooth Device screen is displayed. 3 Touch [Audio] or [Hands-free] of the selected device. • You can check registered shortcut dialing by touching the Bluetooth Device List.
Dialing a Number In the Phone Book You can use the phone book of the mobile phone to make a phone call. Before using, you need to transfer the phone book from the mobile phone to the system. For details on how to transfer the phone book, refer to “Synchronizing the Phone Book” (page 71). 1 4 Using Siri Touch [ ]. Touch the person name or the telephone number from the Phone Book list. Touch [ ]. The phone call is started. Entering a Phone Number to Make a Call 1 (PHONE) button.
Voice Dial Function Operations During a Conversation You can make a telephone call by using voice operation. • Connect your smartphone to the unit via Bluetooth, then set to “Hands-free” or “Both”. (Page 62) 1 Press and hold the 3 seconds. Display example (PHONE) button for at least Name and phone number Conversation time The Voice Dial mode screen is activated. 2 Say the telephone number* or name* you want to call, into the microphone.
Deleting the Phone Book Entries Phone Book Function Deleting One Entry from the Phone Book 1 Press the (PHONE) button. The Phone menu screen is displayed. Display example for Phone Book screen 2 Touch [ ]. The Phone Book screen is displayed. 3 Touch [Delete] of the phone number you intend to delete. The confirmation screen is displayed. If multiple phone numbers are registered, they are all deleted. 4 Touch [OK]. The selected number is deleted.
Bluetooth Audio Assigning as a Short Cut Dialing Number Assigning from Call History 1 Press the If a Bluetooth compatible mobile phone, portable player, etc. is connected by wireless, you can play back a song (operation is controllable from the unit). Display example for Bluetooth Audio main screen (PHONE) button. The Phone menu screen is displayed. 2 Touch [Dialed], [Received] or [Missed]. The last four histories are displayed.
Repeat Play Playing the iDataLinkBluetooth Audio Available for AVRCP Ver. 1.3 and 1.4 only. Touch [ ] during playback. The repeat mode switches every time the button is touched. When the unit is connected to car’s iDataLink module, and “Bluetooth Audio” is set to other than “Aftermarket” (page 43), Bluetooth Audio source via iDataLink module may be available on this unit. 1 2 (FILE) (GROUP) Press the Touch [ button. ] (Bluetooth Audio) of Top banner.
Example for AUX 1, AUX 2, AUX 3, DVD, Game mode display Auxiliary Device (Optional) Operating Auxiliary Devices (Optional) To operate devices connected to the AUX terminals of X008U/INE-W957HD, follow the procedure described below. • Set AUX 1 In to “On”. Refer to “Setting the Auxiliary (AUX) Mode” (page 60). • Depending on the connected unit, the onscreen buttons may not work, or their operation may differ.
[ ] Touch the switch to go back to the beginning of the current chapter/track/file. Touch the switch once more to find the beginning of the previous chapter/track/file. Touch and hold to fast reverse. [ ] Touch the switch to advance to the beginning of the next chapter/track/file. Touch and hold to fast forward. [ ] Starts/Stop M.I.X. play. [ ] Starts/Stop repeat play.
Operating the Mobile Digital TV Receiver (DVB-T) To operate the Mobile Digital TV Receiver (DVB-T) (Optional), set “Setting the Primary Auxiliary (AUX) Name (AUX 1 Setup)” (page 60) or “Setting the Secondary Auxiliary (AUX) Name” (page 60) to “DVBT”. Changing to the Mobile Digital TV Receiver (DVB-T) Mode 1 2 Press the button. Touch [DVB-T] of Top banner.
Camera Operation (Optional) When an optional camera is connected, the view video of camera can be output to the monitor. Front camera or Rear camera can be connected to this unit. Depending on your camera, please choose the connection method (Direct or AUX) and camera type (Front, Rear or Other) first. For details, refer to “Camera Setup” (page 64). Front camera: Switching the Image Pattern for the Rear Camera If the camera has a view switch function, the Direct Change switch is displayed.
Distance guidance mark About the Rear Camera Guide To display the guide, set “Guide Display ON/OFF Setting” (page 77) to On. Also, to adjust the guide, refer to “Adjusting the Rear/Front Camera Guide” (page 64). You can also turn off the guide in the Rear camera display screen. The distance guides represent the ground level distance from the rear bumper. It is difficult to accurately estimate the distance to objects above ground level.
* Smear phenomenon: A phenomenon which occurs when a high-intensity spot (such as a reflection of the sunlight on a car body) is shot by the camera. The picture below is an example of ’vertical smear’ common to CCD cameras. When there is a steep downward slope behind the car (example) A high-intensity spot Error between the screen and the actual road surface In the following conditions, errors are produced between the screen guidance and the actual road surface.
Front Camera Operation Other Camera Operation Set “Front” for “Direct Camera Setting” (page 64). Set “Other” for “AUX Camera Setting” (page 65). Displaying the Front View Video Manually 1 (My Favorites) button. Press the The Favorites screen is displayed. 2 Touch [ ]. The Camera mode is activated and the front view video is displayed.
SiriusXM Satellite Radio Operation (Optional) 3 Touch [ < ] or [ > ] to select the desired channel. Touching and holding either button will rapidly browse through the channels. • Refer to the SiriusXM Tuner User Guide for details on how to install the SiriusXM Tuner. • Before using the SiriusXM, make sure “SiriusXM” is set to other than “OEM” (page 43).
Tuning Channels using Presets Channel No. Channel Name Artist Name Song Title Content Info Category Name 1 2 Touch [Band] of Bottom banner repeatedly until the desired band is displayed. Touch any one of the preset buttons that has a station stored to it. The preset station is received. Checking the SiriusXM Radio ID Number Tune Start Function To subscribe to the SiriusXM Satellite Radio service, it is necessary to locate and identify the Radio ID of your SiriusXM Tuner.
Searching by Featured Favorites Search Function 1 Touch [ 1 Touch [Featured]*. The Category that SXM recommends will be displayed in a list. * Displayed only when the SiriusXM Tuner-SXV200 is connected. 2 Touch the desired category. 3 Touch the desired channel within the selected category. (Search)] of Bottom banner. Search list screen is displayed. 2 Touch the desired category. The channel name search screen of the selected category is displayed. 3 Touch the selected channel.
Receiving and Tuning to an Alert Parental Lock Function Whenever a stored sports team, artist, or song is playing on another channel, an interruption ALERT appears on the unit display. To tune to the game, artist or song identified by the alert, follow the steps below: This function can help restrict the listening of channels to children of appropriate age levels only. For information on setting the Parental Control passcode, refer to “Setting the Parental Lock” (page 59).
Storing the Tag information Playing the iDataLink SiriusXM iTunes Tagging lets you tag songs heard on SiriusXM channels. Using this unit in conjunction with an optional SiriusXM Tuner and a Tagging compatible iPod/iPhone, you can tag the music that you listen to, then transfer the tag information to your iPod/iPhone, and later, when your iPod/iPhone is connected to iTunes, you can preview, buy and download your tagged songs. For details, refer to the Owner’s Manual of the Tagging compatible iPod/iPhone.
About operations during library creation Flash Memory (Optional) • “Tag Search” (page 88) does not work properly while a library is being created. • The order in which songs are played during library creation may differ from the order in the Flash Memory device. You can play back music files (MP3/WMA/AAC) and video files (DivX® ) stored in a Flash Memory device on the internal player of this system. This section explains music operations only.
Repeat Play Random Play (M.I.X. ALL) Operation differs depending on whether the most recent song search was a Tag Search or a Folder/File Search. 1 Touch [ ] during playback. The search mode is activated. The repeat mode switches every time the button is touched. Folder/File Search mode: Repeat 2 (OFF) Touch [Music]. The folder name list screen is displayed. Repeat Folder* (OFF) Repeat 3 Touch [Shuffle All] during playback.
Tag Search Direct Up/Down Function By using file tag information and keeping these songs organized in playlists, this unit’s search functions will ease song searches in large libraries. Each music category has its own individual hierarchy. Use the Playlists/ Artists/Albums/Songs/Genres/Composers search mode to narrow searches based on the table below.
iPod/iPhone (Optional) An iPod/iPhone can be connected to this unit by using the cable KCU-461iV (sold separately). You can connect a video-capable iPod to enjoy video as well as music. When the X008U/INE-W957HD is connected by the above cable, the controls on the iPod are disabled. • This unit does not support video playback from iPhone 5, etc., which with Lightning Connector. • Internet or telephone functions, etc.
The iPod/iPhone operation screen display during video file playback Touch the screen while the iPod/iPhone playback screen is displayed. The iPod/iPhone operation screen is displayed. • The operation screen changes to the visual screen in the iPod mode for 5 seconds after an operation has been performed. 3 Hierarchy 1 Hierarchy 2 Hierarchy 3 Playlists Songs — — Artists Albums Songs — Touch [iPod (Audio or Video)] of Top banner. Albums Songs — — The display shows the iPod mode screen.
Searching for a Desired Video File Direct Up/Down Function You can select a movie, music video, etc., from the list screen. If you touch [ ] of the album name in the search mode, this album will be played back repeatedly. To go to the previous or next Album, use the Direct Up/Down Function. • Video search mode depends on the iPod/iPhone. If the specification of the iPod/iPhone is changed, the search mode on this unit will also be changed.
Repeat Play Touch [ ] to repeatedly play back the currently track. The tracks (files) will be played repeatedly. Touch [ ] again to deactivate Repeat play. Repeat (OFF) Repeat The device can connect with electronic device supporting HDMI output by HDMI interface and fulfill the play of audio and video with HD signal. But, the unit only displays the electronic device interface by mirror image, you cannot operate the electronic device by this unit. Random Play (Shuffle) Touch [ ] during playback.
Pandora® internet radio (optional) Pandora® internet radio is your own FREE personalized radio now available to stream music on your iPhone and smartphone (which runs Android OS or BlackBerry OS). Just start with the name of one of your favorite artists, songs or classical composers and Pandora® will create a “station” that plays their music and more music like it.
“Thumbs” Feedback Creating a New Station You can personalize your stations with “Thumbs Up” or “Thumbs Down” feedback, which the system takes into account for future music selections. Basing on the currently playing song or artist, a personalized Pandora station can be created. The new station will play more music like it. During playback, touch [ ] for thumbs up, or touch [ ] for thumbs down. : The “ ” indicator appears in the display. Pandora® will add similar music to your station.
Bookmarking a Desired Track or Artist Information The currently playing song or artist can be bookmarked and saved to your Pandora account. 1 During playback, touch [Artwork display]. The type selection telop is displayed. Product Software Update This product use software that can be updated through a Flash Memory device. Download the software from the Alpine website and update the product using the Flash Memory device. Updating this product Check the Alpine website for details on updating.
Multi story function* With this function, a single movie includes various story lines. You can select different story lines to view various versions of the same movie. Operation differs from disc to disc. Story line selection screens including instructions appear during the movie. Just follow the instructions. * These functions differ from disc to disc. For details, refer to the disc’s instructions.
List of Language Codes (For details, see page 56.
List of Country Codes (For details, see page 56.
Abbreviation PE PF PG PH PK PL PM PN PR PT PW PY QA RE RO RU RW SA SB SC SD SE SG SH SI Code 8069 8070 8071 8072 8075 8076 8077 8078 8082 8084 8087 8089 8165 8269 8279 8285 8287 8365 8366 8367 8368 8369 8371 8372 8373 Country Abbreviation Peru SJ French Polynesia SK Papua New Guinea SL Philippines SM Pakistan SN Poland SO SR Saint Pierre and Miquelon ST Pitcairn SV Puerto Rico SY Portugal SZ Palau TC Paraguay TD Qatar TF Reunion TG Romania TH Russian Federation TJ Rwanda TK Saudi Arabia TM Solomon Islands
In Case of Difficulty If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected, or then consult your authorized Alpine dealer. Basic No function or display. • Vehicle’s ignition is off.
Disc playback sound skips without vibration. • Dirty or scratched disc. - Clean the disc; a damaged disc should be replaced. If this Message Appears CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW playback not possible. • Close session (finalisation) has not been performed. - Perform finalisation and attempt playback again. Various messages are displayed on the screen during operation.
Audio/Visual Bluetooth Read error. Please check the Disc. • Scratched disc, contaminated disc/poor recording/disc incompatible with this unit. - Touch [ Disc] on the Open/Tilt screen. - Change the disc. Please check Bluetooth audio device. • The Bluetooth audio device was not connected correctly. - Check the settings for X008U/INE-W957HD and the Bluetooth audio device and reconnect. Connected USB Device is not supported. • An iPod/iPhone that is not supported by the unit is connected.
Rental Expired. • The file being attempted to play has a limited number of viewings. The viewing limit has been reached and can no longer be played on this device. After the message has been displayed, the beginning of the next file will automatically be played back. This DivX rental has used XX out of YY views. Continue? • If the total number of viewings for this file has not been exceeded, the views remaining is displayed. - To play back, select [OK].
PICKUP Specifications Wave length MONITOR SECTION Laser power 7.0" (INE-W957HD) 8.0" (X008U) LCD Type Transparent type TN LCD Operation System TFT active matrix Number of Picture Elements 1,152,000 pcs.
CAUTION CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM (Bottom side of player) END USER LICENSE AGREEMENT (Microsoft) You have acquired a device (“DEVICE”) that includes software licensed by Alpine Electronics, Inc. (collectively “ALPINE”) from an affiliate of Microsoft Corporation (collectively “MS”).
NO LIABILITY FOR CERTAIN DAMAGES. INTELLECTUAL PROPERTY RIGHTS. EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL MS BE LIABLE FOR ANY AMOUNT IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS (U.S. $250.00).
END USER LICENSE AGREEMENT (NAVTEQ) In using this Navigation System (hereinafter referred to as “System”), which includes Alpine Electronics, Inc. (“Alpine”) Specifications, Space Machine, Inc. (“Space Machine”) Software and NAVTEQ North America, LLC. (“NAVTEQ”) Database, you are bound by the terms and conditions set forth below. By breaking the seal on the System and using your copy of the System, you have demonstrated your agreement to the terms and conditions of this Agreement.
Installation and Connections Before installing or connecting the unit, please read the following and pages 8 to 13 of this manual thoroughly for proper use. Caution HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. Warning MAKE THE CORRECT CONNECTIONS. The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.
3 Installation X008U user To install the X008U, refer to the manual in the separately purchased installation kit for each car type. Mounting the GPS Antenna inside the vehicle. 1 Clean the mounting location. 2 Put on the GPS Antenna mounting plate. 3 Mount the GPS Antenna. GPS Antenna Caution Do not block the unit’s fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire.
4 6 Mounting the Microphone. For safe use, make sure of the following: • location is stable and firm. • driver’s view and operations are not obstructed. • microphone is located where the driver’s voice can be easily picked up (on the sun visor, etc.). When you speak into the microphone, you should not have to change your driving posture. This may cause a distraction, taking your attention away from safely driving your vehicle. Carefully consider direction and distance while mounting the microphone.
Connection Diagram of SPST Switch (sold separately) (If the ACC power supply is not available) ACC (Red) X008U/INE-W957HD SPST SW (Optional) FUSE (5A) (Optional) BATTERY (Yellow) FUSE (20A) (Optional) Battery • If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately) and fuse (sold separately). • The diagram and the fuse amperage shown above are in the case when X008U/INE-W957HD is used individually.
Connections Antenna To external Audio Processor (PXA-H800, etc.
Radio Antenna Receptacle Not used Digital Output Terminal (Optical) MIC Input Connector Use when combining fiber optic digital input compatible products. Be sure to use the Optical Digital Cable (KWE-610A) (sold separately) only. To Microphone (Included). SiriusXM Tuner Input Connector To SiriusXM Tuner. Remote Control Output Lead (Brown) Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control.
Fuse Holder (15A) Ground Lead (Black) Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.
System Example Connection of a Flash Memory GPS Antenna (Included) USB connector USB extension cable (Included) Flash Memory (sold separately) • Do not leave Flash memory, in a vehicle for a long time. Heat and humidity may damage the Flash memory. Connection of an iPod/iPhone iPod/iPhone (Sold separately) CAMERA/W.
Connection of an External device Optical Digital Cable (KWE-610A) (Sold separately) CAMERA/W.REMOTE Connector To Fiber optic digital Input terminal (for head unit) Audio Processor (Fiber optic digital compatible) (PXA-H800, etc.
Connection of a Mobile Digital TV Receiver and DVD Changer CAMERA/W.
Connection of an External Amplifier AUX/PRE OUT Connector Power Supply Connector Amplifier 4 ch (sold separately) (Red) (White) Input Front speaker Input Rear speaker (Red) (White) Amplifier for subwoofer (sold separately) (Red) Input (White) REMOTE TURN-ON REMOTE ON (Blue/White) (Blue/White) Subwoofer REMOTE ON (Blue/White) 1 Front Output RCA Connectors RED is right and WHITE is left. 2 Rear Output RCA Connectors RED is right and WHITE is left.
Connection of cameras (Direct camera and AUX camera) CAMERA/W.REMOTE Connector CAMERA 1 Direct rearview camera (sold separately) HCE-C117D, etc. To Video Output terminal CAMERA 2 Camera with RCA video output (sold separately) 1 Direct CAMERA Input Connector 3 CAMERA Input RCA Connector 2 Camera extension cable (Included with direct rearview camera) • It’s better to connect the AUX Camera’s power cable to ACC.
Connection of cameras (HCE-C212F + HCE-C210RD or HCE-C200F + HCE-C200R) CAMERA/W.REMOTE Connector CAMERA 2 Control Unit To Video Output Terminal REVERSE (Orange/White) Camera Control Lead (Orange/Black) To plus side of the back lamp signal lead of the car. 1 CAMERA Input RCA Connector 2 RCA Extension Cable (sold separately) • When the screen switches from the front view camera image to the Navigation screen, the location of your vehicle may not be displayed correctly.
LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. (“Alpine”), is dedicated to quality craftsmanship and is pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below. a PRODUCTS COVERED: This Warranty covers Car Audio Products and Related Accessories (“the product”). Products purchased in the Canada are covered only in the Canada. Products purchased in the U.S.A.
About the Rules of Bluetooth Electromagnetic Radiation Regulation USA/Canada FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
User Manual Alpine Navigation Navigation software for the Alpine INE-W957HD/X008U/X009 US English February 2014, ver. 1.
Thank you for choosing the Alpine INE-W957HD/X008U/X009 as your navigator. Start using your device right away. This document is the detailed description of the navigation software. You can easily discover the software while you are using it; however, we still recommend that you read this manual to fully understand the screens and features.
Table of contents 1 Warnings and Safety information .......................................................... 6 2 Getting started .......................................................................................... 7 2.1 Buttons and other controls on the screen........................................................ 8 2.1.1 Using keyboards ..................................................................................................9 2.1.2 Beyond single screen tap ................................
3.1.7 Entering the coordinate of the destination .........................................................43 3.1.9 Building a route from the list of destinations (Create Route) ............................44 3.2 Viewing the entire route on the map ............................................................. 45 3.3 Checking route parameters and accessing route related functions .............. 45 3.4 Modifying the route .......................................................................................
7 Copyright note ........................................................................................
1 Warnings and Safety information The navigation system helps you find your way to your destination with a connected GPS receiver. The software does not transmit your GPS position; others cannot track you. It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you operate your software before you start your journey. Plan the route before your departure and stop if you need to change the route.
2 Getting started When using the navigation software for the first time, an initial setup process starts automatically. Do as follows: 1. Select the written language of the application interface. Later you can change it in Regional settings (page 75). 2. Read the End User Licence Agreement. Tap 3. The Configuration wizard starts. Tap 4. Select the language and speaker used for voice guidance messages. Later you can change it in Sound and Warnings settings (page 75). 5.
7. The initial setup is now complete. The Configuration wizard can be restarted later from the Settings menu (page 65). After the initial setup, the Map screen appears and you can start using the software. 2.1 Buttons and other controls on the screen When you are using the software, you usually tap buttons on the touch screen.
Radio button When there are only a few Tap one of the buttons choices, radio buttons may be to select a new value. used instead of lists. Only one value can be selected. Switch When there are only two choices, a checkmark shows whether the feature is enabled. Slider When a feature can be set to different values in a range, the software shows an indicator on a gauge that displays and sets the value. Virtual keyboar d Alphabetic and alphanumeric keyboards to enter text and numbers.
Entering upper and lower case letters When entering a text, the first character appears in upper case while the rest of the text is in lower case. Tap to enter an upper case letter or tap twice to turn on Caps Lock. Tap again and lower case letters return. Entering symbols Tap to switch to a keyboard offering numeric and symbol characters. Finalising the keyboard entry (accepting the suggested search result) Tap Finalising the keyboard entry (opening the list of search results) . Tap . Tap .
Gestures (drag&drop) You need to drag and drop the screen only in cases like: • Moving the handle on a slider. • Scrolling the list: grab the list anywhere and slide your finger up or down. Depending on the speed of the sliding, the list will scroll fast or slow, only a bit or till the end. • Moving the map in map browsing mode: grab the map, and move it in the desired direction. 2.2 Map screen 2.2.1 Navigating on the map The Map screen is the most frequently used screen of the software.
The data fields are different when you are navigating an active route and when you have no specified destination (the orange line is not displayed). Default data fields when cruising without a destination (tap any of the fields to change its value): Field Description Shows your current speed given by the GPS receiver. Shows the speed limit of the current road if the map contains it.
2.2.2 Position markers 2.2.2.1 Vehimarker and Lock-on-Road When your GPS position is available, the software marks your current position with the Vehimarker. By default, this marker is a blue arrow, but you can change this icon in Settings. When on-road navigation is selected, the Vehimarker may not show your exact GPS position and heading. If roads are near, it is aligned to the nearest road to suppress GPS position errors, and the direction of the icon is aligned to the direction of the road.
2.2.3.2 Turn preview and Next street When navigating a route, the top section of the Map screen shows information about the next route event (manoeuvre) and the next street or the next city/town. There is a field in the top left corner that displays the next manoeuvre. Both the type of the event (turn, roundabout, exiting motorway, etc.) and its distance from the current position are displayed. Most of these icons are very intuitive. The following table lists some of the frequently shown route events.
Approaching the destination. These fields also act as buttons: • Tap the Turn preview field and the voice guidance will repeat the latest instruction with updated distance information. • Tap the Next street field to open the Itinerary. 2.2.3.3 Lane information and Signposts When navigating on multilane roads, it is important to take the appropriate lane in order to follow the recommended route.
2.2.3.5 Motorway exit services You may need a petrol station or a restaurant during your journey. This feature displays a new button on the map when you are driving on motorways. Tap this button to open a panel with the details of the next few exits or service stations. Tap any of them to display it on the map and add it as a waypoint to your route if needed. If you want to display other types of Places for the exits, you can change the icons in Visual Guidance settings (page 74). 2.2.3.
2.2.3.7 Elements of the active route Your software shows the route in the following way: Symbol Name Current GPS position and Start point Description Your current position displayed on the map. If roads are near, it is aligned to the nearest road. Normally if GPS position is available, the route starts from the current position. If there is no valid GPS position, your software uses the last known position as the start point.
In the first column you can see the number of traffic events on your route. The second column contains the full count of traffic events in the categories. Tap any of the even types to list the event in that category or select the top row to open the list of all traffic events: Now tap any of the list items to see its details, and to display the affected road segment in its full length on the map: 2.2.4 Manipulating the map Tap the map anywhere to browse it during navigation.
Zooming in and out Changes how much of the map is displayed on the screen. , Your software uses high-quality vector maps that let you examine the map at various zoom levels, always with optimised content. It always displays street names and other text with the same font size, never upside-down, and you only see the streets and objects that you need. Map scaling has a limit in 3D map view mode. If you zoom out further, the map switches to 2D view mode.
2.2.5 Checking the details of the current position (Where Am I?) This screen contains information about the current position (or about the last known position if GPS reception is not available) and a button to search for useful Places nearby. . You can access this screen from the map in one of the following ways: • If the current street is displayed below the Vehimarker (the current position on the map), tap it to open the Where Am I? screen. • In the Navigation menu, tap and then .
• : Police stations • : Petrol stations Tap any of the buttons, select a Place from the list, and navigate to it. 2.3 Navigation menu You can reach all parts of the software from the Navigation menu. When you open the menu, the destination search buttons appear on the screen. Tap any other menu button at the top and their feature buttons appear below.
3 On-road navigation When first started, Alpine INE-W957HD/X008U/X009 calculates routes using the road network of the high quality vector maps provided with the product. You can set up your route in different ways: • If you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation).
3.1.1.1 Entering an address To enter an address as the destination, do as follows: 1. In the Navigation menu, tap the following buttons: , . 2. By default, the software proposes the country and city/town where you are. If needed, , enter the first few letters of the country name on the tap keyboard, and select one country from the list of results. 3. If needed, select a new city/town: . a. Tap b. Start entering the name of the city/town on the keyboard. c.
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the street from the list. 4. 5. Enter the house number: a. Enter the house number on the keyboard. (To enter symbols, tap ). b. Tap to finish entering the address. (If the entered house number cannot be found, the midpoint of the street is selected as the destination.
Tip! If you know that you will use this destination frequently, before tapping to confirm the destination, put it in the Address Book first: tap then , give a name for the new entry, and tap to save the location. The map with the destination returns automatically. Now you can start your journey. 3.1.1.2 Entering the midpoint of a street as the destination You can navigate to the midpoint of a street if the house number is not available: , . 1. In the Navigation menu, tap the following buttons: 2.
4. Instead of entering the house number, tap the input field above. The midpoint of the street is selected as the destination. 5. After a short summary of the route parameters, the map appears showing the entire to modify route route. The route is automatically calculated. Tap parameters, or tap and start your journey. 3.1.1.3 Selecting an intersection as the destination To enter an address as the destination, do as follows: 1. In the Navigation menu, tap the following buttons: 2.
4. Instead of entering the house number, tap street is selected as the destination. 5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap and start your journey. 27 .
3.1.1.4 Selecting a city/town centre as the destination The city/town centre is not the geometric centre of the city/town but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of the important intersections. 1. In the Navigation menu, tap the following buttons: , 2. If necessary, modify the country as described earlier (page 23). 3. Select the destination city/town: a. Tap b.
3.1.1.5 Entering an address with a postal code All of the above address searching possibilities can be performed with entering the postal code instead of the city/town name. Find below an example with a full address: , 1. In the Navigation menu, tap the following buttons: 2. If necessary, modify the country as described earlier (page 23). 3. Enter a new city/town using its postal code: a. Tap b. Start entering the postal code. c. Find the city/town you need: • .
results before it appears automatically, tap the street from the list. 5. 6. ). Select Enter the house number: a. Enter the house number on the keyboard. (To enter symbols, tap ). b. to finish entering the address. (If the entered house Tap number cannot be found, the midpoint of the street is selected as the destination.) After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated.
• • After entering a couple of letters, tap contain the specified letters. to list the items that You can speed up finding an intersection: • Search first for the street with a less common or less usual name; fewer letters are enough to find it. • If one of the streets is shorter, search for that one first. You can then find the second one faster. • You can search for both the type and the name of a road.
3. After entering a few letters, tap to open the list of Places with names containing the entered character sequence. 4. (optional) The Places in the list are ordered by the length of the necessary detour (when navigating a route) or by their distance from the current position (when no . destination is given). If you need to reorder the list, tap 5. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle.
2. The preset search categories appear: • : • If an active route exists, petrol stations are searched along the route. • If there is no active route (destination is not selected), they are searched around the current position. • If the current position is not available either (no GPS signal), they are searched around the last known position. • : • If an active route exists, parking lots are searched around the destination of the route.
4. (optional) The Places in the list are ordered by their distance from the current or last known position, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 5. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen. 6. (optional) Tap to see the details of the selected Place. Tap to return to the map. 7.
3.1.2.3 Searching for a Place of Interest by category You can search for Places of Interest by their categories and subcategories. 1. In the Navigation menu, tap the following buttons: , 2. Tap 3. Select the area around which the Place should be searched for: . . • Tap to search around the current position or if it is not available, around the last know position. (The result list will be ordered by the distance from this position.) • Tap to search for a place within a selected city/town.
6. Select one of the Place subcategories (e.g. Hotel or Motel) or tap to list all Places in the selected main category around the selected location or along the route. 7. Sometimes the list of brands in the selected Place subcategory appears. Select one to list all Places in the selected subcategory around brand or tap the selected location or along the route. 8. Finally, the results appear in a list. 9.
12. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap to modify route and start your journey. 3.1.2.4 Searching for a Place of Interest by name You can search for Places of Interest by their names. You can search around different locations or along your route in the whole Place database or in one Place category or subcategory only. 1. In the Navigation menu, tap the following buttons: 2. Tap 3.
4. (optional) If you have selected 5. Select one of the main Place categories (e.g. Accommodation) to search in or tap , select the city/town to search in. to search among all Places. 6. Select one of the Place subcategories (e.g. Hotel or Motel) to search in or tap to search in the selected Place category. 7. Tap if you have not done it before. 8. Using the keyboard, start entering the name of the Place.
9. After entering a few letters, tap to open the list of Places with names containing the entered character sequence. 10. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 11. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle.
3. In the left field enter the name you are looking for. It can be a street address (just the street name or both the street and the house number), the name of a Place, a previous destination or an Address Book entry. 4. If you are searching in an area that is far from your current location, tap on the right field and enter a city name or a post code from the target area. 5. While you type, the number of matching items is displayed on the left broken down by category.
3. Tap the location that you want to select as your destination. The Cursor ( appears. ) 4. Tap 5. After a short summary of the route parameters, the map appears showing the entire to select the Cursor as the destination. to modify route route. The route is automatically calculated. Tap parameters, or tap and start your journey. 3.1.5 Selecting the destination from your Address Book You can select a location that you have already saved as an Address Book entry to be your destination.
3. Tap the entry that you want to set as your destination. If necessary, browse down to see more of the list or tap of the entry. 4. and enter a few letters from the name After a short summary of the route parameters, the map appears showing the entire to modify route route. The route is automatically calculated. Tap parameters, or tap and start your journey. 3.1.6 Selecting a recent destination from the History The destinations that you have set earlier appear in the History. 1.
3.1.7 Entering the coordinate of the destination You can also select a destination by entering its coordinate. Do as follows: 1. In the Navigation menu, tap . 2. Open the 3. You can enter the latitude and longitude values in any of the following formats: decimal degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds. 4. (optional) If necessary, tap the coordinate in UTM format. 5. When finished, tap 6.
3.1.9 Building a route from the list of destinations (Create Route) You can also build your route destination by destination from the Route menu. 1. In the Navigation menu, tap . 2. Tap 3. There is only one line in the list of route points, the start point of the route, normally the current GPS position. 4. Tap 5. The Destination menu appears and you can select the destination of the route the same way as described in the previous sections. 6.
7. To add more destinations, tap where you want to insert the new route point in the list, and repeat the above procedure. 3.2 Viewing the entire route on the map It is easy to get a map overview of the active route. Do as follows: 1. In the Navigation menu, tap . 2. Tap . The active route is displayed in its full length on the map together with additional information and controls. 3.
3. You have the following options on this screen (for detailed instructions on how to use them, see the next chapter): • Tap to edit the route: to add or remove destinations or change their sequence. You can also set a route start point other than your current location. This can be useful to plan and save a future trip. • Tap to display the entire route on the map. • Tap to bypass a part of the route. • Tap to delete the active route.
• Tap to plan a new route to the newly selected location. The previous destination and waypoint(s) are deleted. • Tap to add the newly selected location as an intermediate destination to your route. The other destinations of the route remain intact. Note: the new waypoint is placed among destinations to keep the route optimal. To decide where a waypoint to appear, use the Edit Route feature. • to append the newly selected destination at the end of the route.
4. The Destination menu appears and you can select the start point of the route the same way you select a destination. 5. When the new start point is set, tap 6. The map returns with a transparent Vehimarker (showing that there is no GPS reception). If an active route already existed, it is now recalculated starting from the selected location. 7. To return to normal navigation, tap . . 3.4.3 Editing the list of destinations (Edit Route) You can edit the route by modifying the list of destinations.
3. You have the following options: • Tap to add a new destination. • Tap to delete a destination. • Tap to modify the start point of the route. • Tap to reorder the list. You can do it manually or you can let the application optimise the route for you. 3.4.4 Cancelling the active route To cancel the navigated route, do one of the following: The link ed image cannot be display ed. The file may hav e been mov ed, renamed, or deleted. Verify that the link points to the correct file and location.
2. Tap . 3. You see the basic details of three route alternatives with the selected route planning method. Tap any of them to see it on the map. 4. Or if you cannot find a good alternative, tap routes with different routing methods. 5. to return to the Map Select one of the route alternatives then tap screen. The software recalculates the route. The orange line now shows the new recommended route. and scroll down for 3.4.
2. Tap and then tap one of the following: • • • • 3. The software recalculates the route optimised for the new vehicle type. The orange line now shows the new recommended route. 3.4.7 Changing the road types used in route planning To recalculate the active route with different road type preferences, do as follows. These changes can also be made in Settings. The link ed image cannot be display ed. The file may hav e been mov ed, renamed, or deleted.
• 3. - The software excludes unpaved roads by default: unpaved roads can be in a bad condition and usually you cannot reach the speed limit on them. to confirm the changes. The software recalculates the route. Tap The orange line now shows the new recommended route.
3.5 Saving a location as an Address Book entry You can add any location to the Address Book, the list of frequently used destinations. Planning a route to one of these destinations was described earlier. 1. Select a destination as described before. It can be an address, a Place, any location on the map, a previously used destination from History, a coordinate or a location where a photo was taken. 2. When the full screen map appears with the selected location in the middle, tap . 3. Tap . 4.
3.6 Saving a location as an alert point You can save any map location as an alert point (for example a speed camera or a railway crossing). 1. Browse the map and select a location. The red Cursor appears there. 2. Tap 3. Scroll down the list and tap 4. On the newly opened screen, select the type of the alert point, the direction from which you expect the alert, and (if applicable) the speed limit for this alert point. 5. Tap . . to save the location as a new alert point.
3.7 Editing an alert point You can edit a previously saved or uploaded alert point (for example a speed camera or a railway crossing). 1. Browse the map and select the alert point to edit. The red circle appears around the alert point. 2. Tap 3. Scroll down the list and tap 4. On the newly opened screen, modify the type of the alert point, the direction from which you expect the alert, or (if applicable) the speed limit for this alert point. 5. Tap . . to save the changes to the alert point.
3.8 Watching the simulation of the route You can run a simulated navigation that demonstrates the active route. Do as follows: 1. In the Navigation menu, tap . 2. Tap 3. Tap . The simulation starts from the starting point of the route, and using a realistic speed, it leads you through the whole recommended route. 1. (optional) You have the following controls during the simulation: . • : Jump to the next route event (manoeuvre). • : Pause the simulation.
2. Tap to stop the simulation.
4 Off-road navigation When first started, Alpine INE-W957HD/X008U/X009 calculates routes using the road network of the high quality vector maps provided with the product. You can switch the application to off-road mode in Navigation settings in one of the following ways: • From the Navigation menu, tap , and then . The link ed image cannot be display ed. The file may hav e been mov ed, renamed, or deleted. Verify that the link points to the correct file and location.
5 Reference Guide On the following pages you will find the description of the different concepts and menu screens of the software. 5.1 Concepts 5.1.1 Smart Zoom Smart Zoom provides much more than just a usual automatic zoom feature: • While following a route: when approaching a turn, it will zoom in and raise the view angle to let you easily recognise your manoeuvre at the next junction.
• Roads are used only if access for cars is allowed. • Private roads and resident-only roads are used only if they are inevitable to reach the destination. • Walkways are excluded from routes. • : • All manoeuvres are available in intersections. • Directional constraints are taken into account the way that opposite direction is allowed with a low speed. • A private road is used only if the destination is there. • Walkways are excluded from routes.
5.1.3 Green routing Route calculation is not only about finding the quickest or shortest route. For some of the vehicle types, you can also check the fuel consumption and CO2 emission when planning a route, and you can create cost effective routes with less effect on the environment. In Route settings, you can edit the parameters of the selected vehicle. Enter the fuel consumption values and the price of the fuel.
You can also choose to see the speed limit sign on the map all the time. 5.1.5 Traffic information in route planning The recommended route is not always the same between two points. Offline statistical traffic information (historical speed information or traffic patterns) can be taken into account in the route calculation based on the time of day and the day of week whenever suitable data exists.
Tap to open the list of traffic even categories : In the first column you can see the number of traffic events on your route. The second column contains the full count of traffic events in the categories. Tap any of the even types to open the list of traffic events or tap the first line to show all events: Now tap any of the list items to see its details, and to display the affected road segment in its full length on the map: 5.
Button Description Tap this button to get information about the current location and to find nearby help. Tap this button to open the GPS Information screen with satellite position and signal strength information. If you save your trip logs when you arrive at some of your destinations or let the application automatically save the trip logs for you, those logs are all listed here. Tap one of the trips to see the trip statistics, speed and altitude profile.
Select a country from the list and see useful driving information about the selected country. Information may include speed limits on different road types, the maximum blood alcohol level and any compulsory equipment you need to show when stopped by the police. 5.3 Settings menu You can configure the program settings, and modify the behaviour of the software. In the Navigation menu, tap . The Settings menu has several options. Tap or scroll with your finger to see the full list.
Button Description Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. Enable different sounds and alerts in the application. The recommended route is not always the same between two points. Whenever suitable data exists, traffic information can be taken into account in the route calculation. These settings determine how routes will be calculated.
5.3.1 Sound and Warnings Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. Button Description Tap this button to adjust the volume of the different sounds in the application. A new screen shows the different sound types and their controls. See below for details. This button shows the current voice guidance profile.
Maps may contain information about the speed limits of the road segments. The software is able to warn you if you exceed the current limit. This information may not be available for your region (ask your local dealer), or may not be fully correct for all roads in the map. This setting lets you decide whether you wish to receive visible and/or audible warnings. Adjust the slider to set the relative speed above which the application initiates the warning.
5.3.3 Traffic settings The recommended route is not always the same between two points. Whenever suitable data exists, traffic information can be taken into account in the route calculation. Button Description Use this switch to enable or disable historical traffic data and traffic patterns. This locally stored information can be very useful in normal circumstances but for example on public holidays it may be better to turn off in order not to take into account normal weekday traffic jams.
screen, and the part of the route not matching your preference will be displayed in a different colour on the map. In the list of road types you can see in how many segments and what total length of the road type is used in the current route. Button Description You might need to avoid motorways when you are driving a slow car or you are towing another vehicle. Charge roads are pay roads where you can purchase a pass or vignette to use the road for a longer period of time.
Enter the average consumption of your vehicle when used in built-up areas. The unit for consumption can be set in Regional Settings. Enter the average consumption of your vehicle when used on highways. The unit for consumption can be set in Regional Settings. Select the engine and fuel type of your vehicle. This helps in estimating the CO2 emission. Enter the average fuel price for travel cost calculation. The currency can be set in Regional Settings. Set the maximum speed you travel with the vehicle.
• Roads are used only if access for taxis is allowed. • Private roads, resident-only roads and walkways are excluded from routes. Route Planning Method types: Button Description Gives a quick route if you can travel at or near the speed limit on all roads. Usually the best selection for fast and normal cars. Gives a short route to minimise the distance to travel. It can be practical for slow vehicles.
Button Description Switch the map view between a 3D perspective view and two 2D topdown view modes. Adjust the basic zoom and tilt levels to your needs. Three preset levels are available. There is also a manual mode when you can set the zoom and tilt levels with the buttons on the left. When selected, the map zooms out to show an overview of the surrounding area if the next route event (manoeuvre) is far. When you get close to the event, the normal map view returns.
5.3.6 Visual guidance settings Adjust how the software helps you navigate with different kinds of route related information on the Map screen. The data fields in the corner of the Map screen can be customised. Tap this button and select the values you want to see. The values can be different when you navigate a route from when you are just cruising without a given destination.
Similar to the above possibility, alternative routes can be suggested when driving on normal roads. The software will select a different turn in the upcoming intersection and offers you a different route for the next section of the route. Your options are the similar as above but you cannot modify the offered detour. Parking at the destination may not be easy in city areas. As you approach the destination, the software can offer parking category Places near your destination.
5.3.8 Trip monitor settings Trip logs contain useful information about your trips. Trip logs can be saved manually when you reach your destination or you can turn on the automatic saving here. You can access these logs in the Trip monitor. Trip monitor is available from the More menu. This is not a button. This line shows the current size of the trip database, the sum of all trip and track logs saved. Trip monitor can record statistical data of your trips.
6 Glossary 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
Route A sequence of route events, i.e. manoeuvres (for example, turns and roundabouts) to reach the destination. The route contains one start point and one or more destinations. The start point is the current (or last known) position by default. If you need to see a future route, the start point can be replaced with any other given point. Heading-up map orientation In this mode the map is rotated so its top always points in the current driving direction. This is the default orientation in 3D map view mode.
7 Copyright note The product and the information contained herein are subject to change without prior notification. This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Alpine Electronics, Inc. © 2014 - Alpine Electronics, Inc All rights reserved. © 2014 NNG Kft. All rights reserved. Map data: © 1987 - 2014 HERE. All rights reserved. see http://corporate.navteq.