Owner's Manual

85-EN
Storing the Tag information
iTunes Tagging lets you tag songs heard on SiriusXM channels. Using
this unit in conjunction with an optional SiriusXM Tuner and a Tagging
compatible iPod/iPhone, you can tag the music that you listen to, then
transfer the tag information to your iPod/iPhone, and later, when your
iPod/iPhone is connected to iTunes, you can preview, buy and download
your tagged songs. For details, refer to the Owner’s Manual of the
Tagging compatible iPod/iPhone.
The TAG icon will appear when a song playing on a SiriusXM channel
has tag information available.
When a desired song is heard on an SiriusXM channel, touch the [TAG]
icon to save its tag information
During tagging, the TAG indicator blinks.
If no iPod/iPhone is connected, “Tag count X” is displayed (X is
the total amount of the tag information stored in this unit).
• During tagging, the iPod/iPhone takes priority to save the tag
information. If no iPod/iPhone is connected, the tag information is
saved to this unit.
• When the memory of iPod/iPhone is full, “iPod memory full” and
“Tag count X” are displayed in succession. The tag information will
be stored to the unit.
• If the tagging operation is interrupted by a hands-free phone call, the
tagging operation will be canceled and the unit will display “Cannot
Tag”.
• This unit can store up to 50 pieces of tag information. When the
memory of the unit is full, “Tuner memory full. Connect iPod.” may
be displayed.
• When the iPod/iPhone is disconnected from the unit during tagging,
its tag information will be stored in the unit.
• If there is stored tag information on the unit, when an iPod/iPhone
supporting the tag function is connected, the stored tag information
will be transferred to the iPod/iPhone automatically. When the iPod/
iPhone memory becomes full, “iPod memory full <xx> remaining.”
may be displayed, and any remaining tag information on the unit will
not be transferred to the iPod/iPhone.
• If tag information already exists, “Already Tagged” will be displayed
when you try to tag information again.
Playing the iDataLink SiriusXM
When the unit is connected to car’s iDataLink module, and “SiriusXM”
is set to other than “Aftermarket” (page 43). SiriusXM source via
iDataLink module may be available on this unit.
The iDataLink SiriusXM source icon is marked with icon.
• For detailed operation, refer to Owner’s Manual of iDataLink
module.
• Depending on the connected iDataLink module, display screen and
function keys may differ.
When tagging is allowed,
the TAG icon is displayed.