Owner's Manual

28-EN
Top banner and Bottom banner Fade Out
Setting
When “Top/Bottom Banner Fade Out” is set to ON, the Top banner and
Bottom banner on the Audio/Visual Playback screen fade out after
5 seconds if no operation is performed. To display the keys again, touch
the middle of the screen.
• For details of how to set Top/Bottom Banner Fade Out, refer to
“Setting Top banner and Bottom banner Display” (page 44).
Switching Sources
During audio/visual playback, press the AUDIO button or touch a
source button in the top banner to switch to the desired source.
Switching Sources Using the AUDIO Button
During audio/visual playback, press the AUDIO button repeatedly
to switch to the desired source.
Radio Disc*
1
USB/iPod*
1
iDataLink USB/iPod*
2
HDMI*
1
Pandora*
1
Bluetooth Pandora*
3
SiriusXM*
1
iDataLink SiriusXM*
2
AUX 1*
4
AUX 2*
4
AUX 3*
5
Bluetooth Audio*
1
iDataLink Bluetooth Audio*
2
Radio…
*
1
When no disc is inserted or no Flash memory/iPod/HDMI device/
Smartphone/SiriusXM Tuner/Bluetooth compatible device is
connected, this option is not available.
*
2
Displayed only when the unit is connected to the car’s iDataLink
module and the iDataLink related setting item is set to “OEM” or
“Both” on the unit. (Page 43)
*
3
When Bluetooth Pandora is set to “Off”, this option is not available.
(Page 61)
*
4
When AUX 1 In is set to “Off”, this option is not available. (Page 60)
*
5
When AUX 3 Source Select is set to “iPod Video”, this option is not
available. (Page 60)
Switching Sources Using the Top banner
Touch the source button for the Top banner at the top of the Audio/
Visual Playback screen and select the desired source.
If the source button is hidden, touch [b] [B].
• When “Slide Source Change” (page 55) is set to “On”, you can
switch sources by swiping from the middle of the marked area from
right to left or from left to right.
• For USB/iPod / SiriusXM / Bluetooth Audio, you can select the
source from this unit or from iDataLink module. Refer to “Setting the
Source Category” (page 43).
• The Source display order can be changed. For details, refer to
“Customizing the Source Banner” (page 55).
This mode is useful if you feel the unit’s display is too bright at night.
To cancel Screen OFF mode, touch the screen or press any button.
• Screen OFF mode is canceled when the power or ACC is turned off.
• When the gear lever is shifted to the reverse (R) position while the
rear camera is connected, the rear camera image is displayed.
• When a call is received while a Bluetooth device is connected, the
incoming call screen is displayed.
Top banner
Bottom banner
Screen Off Function
Source button
Top banner
Swipe here
to switch
source