Other Content

v. 051016
Dear Consumer,
Thank you for your interest in an Alpine Restyle In-Dash System. We want you have a positive and enjoyable experience with the
system. To help you learn about this product, we prepared a list of Frequently Asked Questions (FAQs) to address common inquiries
about product use and installation. Please read the FAQs below and if you have further questions, we invite you to contact us:
Alpine Customer Support:
1-800-832-4101
Monday - Friday, 7 AM - 5 PM PST
Online Support Center:
supportalpineusa.custhelp.com
Owner’s Manuals:
alpine-usa.com/support
Product Compatibility for Alpine Restyle In-Dash Systems:
10-Inch Screen:
 X110-SLV: GMC Sierra (2014-Up), not compatible with models with the factory Bose system
 X110-SRA: Chevrolet Silverado (2014-Up), not compatible with models with the factory Bose system
9-Inch Screen
 X009-WRA: Jeep Wrangler (2011-Up)
 X109-WRA: Jeep Wrangler (2011-Up)
 i109-WRA: Jeep Wrangler (2011-Up)
 X009-RAM: Ram Trucks (2013-Up, not compatible with
with 8.4-inch factory screen)
 X009-TND: Toyota Tundra (2007-2013)
 X009-GM: This product is compatible with the following
vehicles with Lower-dash factory radios, it is not
compatible with fleet models: Chevrolet Silverado (2007-
2013), Chevrolet Avalanche (2007-2013), Chevrolet
Suburban (2007-2014), Chevrolet Tahoe (2007-2014),
GMC Sierra (2007-2013), GMC Yukon/XL (2007-2014)
 X009-GM2: This product is compatible with the following
vehicles with Upper-dash factory radios: Chevrolet
Silverado (2007-2013), GMC Sierra (2007-2013)
 X009-FD1: Ford F-150 (2009-2014, compatible with Base
model 2013-Up F-150 if the HVAC controls can be
separated from the dash panel; not compatible with 4.2-
inch MyFord screen or 8-inch MyFord Touch screen)
 X009-FD2: Ford F-150 (2013-2014, compatible with 4.2-
inch MyFord screen only).
 X009-U: For custom installations
8-Inch Screen
X108U: For custom installations or for use with vehicle-specific dash kits, visit www.alpine-usa.com to view compatible dash kits
Installation Information:
Q: Why is there engine noise from my vehicle after I installed the Alpine system?
A: Please make sure the head unit has a good chassis ground and the rear seat entertainment retention harness is also grounded.
Please contact us for further assistance.
Q: Why am I not getting any sound from the factory satellite radio tuner?
A: Please verify that the iDatalink 3.5-mm cable is plugged into the iDatalink port on the rear of the unit.
Q: Does the X110-SLV/SRA retain the parking assist function if my truck has the Bose factory system?
A: The parking assist feature is not compatible with trucks with the Bose system. Please contact us for an alternative solution.
iDatalink Maestro Module Set-Up:
Q: I can’t add my Alpine Restyle In-Dash System’s serial number to the online iDatalink system set-up?
A: When you enter the serial number on the iDatalink set-up form, do not add the alphabetical letter at the end of the serial
number. If the serial number is still not accepted, please contact us at the number above and we can help you.
Q: Where on the radio does the 4-PIN iDatalink plug connect to?
A: This plug connects to the “IDATALINK I/F” plug in the reverse camera input harness.