0-INCH ADVANCED NAVI STATION X110 8-INCH ADVANCED NAVI STATION X108U 7-INCH ADVANCED NAVI STATION INE-W967HD QUICK REFERENCE GUIDE GUIDE DE REFERENCE RAPIDE GUfA DE REFERENCIA RAPIDA Please register your product at www.alpine-usa.com/registration for a chance to win prizes. Enregistrez-vous sur www.alpine-usa.com/registration et tentez de rem porter des prix. Registre su producto en Ia direcci6n www.alpine-usa.com/registration para optar a excelentes premios.
Contents WARNING ................................................................................................................................................................2 CAUTION .................................................................................................................................................................3 Getting Started ..................................................................................................................................................
WARNING ~WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER CANNOT WATCH TV /VIDEO UNLESS THE VEHICLE IS STOPPED AND THE EMERGENCY BRAKE IS APPLIED. It is dangerous for the driver to watch TV /Video while driving a vehicle. Installing this product incorrectly enables the driver to watch TV /Video while driving.
~CAUTION This symbol means important instructions. Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing. HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. I The wiring and installation of this unit requires special technical skill and experience.
Location of Controls, Turning Power On or Off Getting Started Location of Controls The screen design used in the Owner's Manual may differ from the actual screen. For X1 08U/INE-W967HD ForX110 CD (J) Microphone Used for Hands-free or Voice Control modes. ~I~ button Press to seek down/up a station in radio mode or down/up a track, chapter, etc., in other audio/visual ® 1' (AUDIO)/ (Voice Recognition mode) button sources. Displays the AudioNisual screen.
Turning Power On or Off 1 Turn the ignition key to the ACC or ON position. The system is turned on. 2 Press and hold the MENU button for at least 5 seconds to turn the power off. Switching the Audio Sources Screen to a Dedicated Screen You can switch the Audio Sources screen to a dedicated screen by touching the icon on one of the four edges of the screen, or by swiping vertically or horizontally. You can set the Sound Setup or Rear Seat Entertainment System.
Owner's manual Favorite Function Favorite Function This unit enables you to recall functions easily by registering frequently used items such as the Audio source, the navigation search function, etc to the Favorite screen. You can recall any of these items easily. 1 Press the* (Favorite) button. G) Changes to the Edit screen used for registering items or changing names. The Favorite screen is displayed. • • You cannot edit any items on the Edit Menu screen while driving.
Radio/HD Radio'M/RBDS HD Radio™/RBDS Operation Preset button Displays the preset stations with a short touch. Touch for at least 2 seconds to Memorize the current station as a preset station. Preset mode screen Information display Increases frequency PTY Search button _ _ __. Swipe to the right when you use the PTY list screen. (RBDS FM mode only) L....
Owner's manual USB Flash drive Operation (Optional) USB Flash drive Operation (Optional) You can play back music files (MP3/WMA/AAC/FLAC) stored in a USB flash drive on the internal player of this system , . . . - - - - - - - - - - - - - - - - - - - - - - - - Quick Search button Touch or swipe to the right to use the Quick Search mode. Quick Search mode screen Current song no.!Total song no.
Owner's manual '==== Pandora• internet Radio Operation (Optional) Pandora® Internet Radio Operation (Optional) • iPhone Pandora main screen example r------------ Bookmark Artist/Track QuikMix Play indicator - - - - - I Pandora information display Artwork display - - - - - - Playing time "Thumbs Down" feedback Pause and Playback -----------,1 Skipstothenextsong r--------- Creates a New Station from the 1 • ------------~~ Creates a New Station from the currently received artist information ~ f
SiriusXM Satel lite Radio Operation (Optional) SiriusXM Satellite Radio Operation (Optional) When a SiriusXM Tuner is connected to this unit, the following operations can be performed. Preset button Swipe vertically in the list to change pages. Preset mode screen Signal Indicator SiriusXM Satellite Radio information display Changes to next channel Switches Function button Search mode button Swipe to the right when you use the search mode screen.
HDMI DVD I HDMI Device (DVD Player) Operation For Xl 08/INE-W967HD, w hen you connect an optional DVE-5300 (DVD Player), you can operate it from the unit. Finds the beginning of the - - current chapter/Finds a previous chapter within one second after playback starts/ Fast-reverses when touched for at least 1 second -~......r-=-~- Finds the beginning of next chapter/Fast-forwards when touched for at least 1 second ...__ _ _ _ _ Displays Menu screen Pause and Playback ----------~ ...
Owner's manual iPod/iPhone (Optional) iPod/iPhone Operation (Optional) A separately sold USB iPod/iPhone AV cable (KCU-461 iV) or a separately sold Lightning to USB cable (KCU-471 i) is required depending on the type of iPod/iPhone. Audio mode , . . . - - - - - - - - - - - - - - - - - - - - - - Quick Search button Touch or swipe to the right to use the QuiCk Search mode. Quick Search mode screen Alpine Song3 Current song no./Total song no.
Owner's manual Bluetooth Setup, Bluetooth Operation Hands-Free Phone Control Hands-free ca lls are possib le when using an HFP (Hands-Free Profile) compatible mobile phone with this unit. How to connect to a Bluetooth compatible device (Pairing) 6 When the device registration is complete, a message appears and the device returns to normal mode. The Bluetooth function is always available on this unit. You can, therefore, search for a Bluetooth device for pairing at any time.
Map Functions Below is an overview of different buttons and icons on the map display. For more detailed information about this screen, please see the Owner's Manual. Next street 2D/2D North up/3D views Traffic Zoom Data f i e l d s - - - - - - Additional information Lane information Motorway services it If It Warning road sign - - - I ...( Destination menu Access the menu Touch [Q], or swipe to the left.
Navigation Menu To access the Navigation Menu, touch [Q] on the right edge of the map screen or swipe to the left. Alternatively, press the @ button. Multipoint Route - - - - - - - - - - - - - - - - - - . Build your route from one or more route points. You can also plan a route independently of your current GPS position by setting a new starting point. r----------lnformation Access additional options and check navigation-related information. New Rout - - - - - - - - - - - - - - - .
Setting a Destination The following example describes how to search for a destination when choosing [City or ZIP code] from [Address]. • You can search and narrow down the Country/State by starting from [Country/State]. 1 Touch [New Route] from the Navigation Menu. 2 3 4 Touch [City or ZIP code]. Enter the town name or postcode. Enter the desired street name. w A •f.- s z D 123 y T R E • Touch - 6 G H j K c v B N M F G p 0 L Span; to display the cand idate list.
Owner's manq.!ll _ <' . , Specifications Specifications MONITOR SECTION Bluetooth SECTION Screen Size 10"(X110) 8"(X1 08U) 7" (INE-W967HO) Transparent type TN LCD LCD Type TFT active matrix Operation System 1,152,000 pes.
NOSE/CHASSIS SIZE • Xll 0 is sized exclusively for a certain car model. CD/DVD SECTION (Xl 08U) Frequ ency Respo nse Wow & Flutter(% WRMS) Total Harmo nic Distortion Dynami c Range Cha nn el Separa ti on Horizontal reso lution Video out put leve l Video S/N rati o Audio S/ N ratio 178 mm (7-1/8") I 00 ['._ ------ 0 E E X110 only CD 5 - 20,000 Hz(± 1 dB) Be low measurable limits 0.
X1 08U/INE-W967HD I Made for ~ iPod DiPhone HIGH-DEFINITION MULTIMEDIA INTERFACE • H5' -!J Ra d10 ® This HD Radio receiver enables: PSD) HD2 1HD3) Digital Sound) Artist Experience) (()) READY C)Biuetooth® WORKS WITH PANDORA ~ MP3 AAC II:;.;~ l Maps for life ~,,,,,,~ aASSENGINE ~ Made for ~ iPod ~s" ~JI 'a :§:? DiPhone .
• Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. • iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. • "Made for iPod;' and "Made for iPhone," mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
About the Rules of Bluetooth Electromagnetic Radiation Regulation USA/Canada FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-1 02 of the IC radio frequency (RF) Exposure rules.
LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. ("Alpine"), is dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below. e PRODUCTS COVERED: This Warranty covers Car Audio Products and Related Accessories ("the product"). Products purchased in the Canada are covered only in the Canada. Products purchased in the U.S.A.
GARANTIE LIMITEE Fidele a son engagement de ne fournir que des produits de qua lite, ALPINE ELECTRONIQUE DE L'AMERIQUE, INC.(« Alpine ») est heureuse de vous offrir cette garantie. Nous vous suggerons dele lire attentivement et en entier. Si vous avez Ia moindre question, veuillez contacter l'un de nos concessionnaires ou appeler directement Alpine aux numeros listes ci-dessous.
ALPINE ELECTRONICS MARKETING, INC. ALPINE ELECTRONICS OF U.K. LTD. 1-7, Yukigaya-Otsukamachi, Ota-ku, Alpine House Fletchamstead Highway, Tokyo 145-0067, JAPAN Coventry CV4 9TW, U.K. Phone: 03-5499-4531 www.alpine.co.uk ALPINE ELECTRONICS OF AMERICA, INC. ALPINE ELECTRONICS France S.A.R.L. 19145 Gramercy Place, Torrance, 184 allee des Erables California 90501, U.S.A.
EN 10-INCH ADVANCED NAVI STATION X110 FR 8-INCH ADVANCED NAVI STATION X108U ES 7-INCH ADVANCED NAVI STATION INE-W967HD • OWNER’S MANUAL Please read before using this equipment. • MODE D’EMPLOI Veuillez lire avant d’utiliser cet appareil. • MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. Thank you for purchasing this Alpine product. Please take a moment to protect your purchase by registering your product now at the following address: www.alpine-usa.com/registration.
For X108U/INE-W967HD For X110
ENGLISH Contents Operating Instructions PRECAUTIONS IMPORTANT INFORMATION ........................ 8 WARNING Points to Observe for Safe Usage ........................ 8 WARNING ...................................................... 9 How to Input Characters and Numbers (Keypad) ........................................................... 23 Favorite Function Using the Favorite Function .............................. 24 Editing the Favorite Screen ................................ 24 Registering Items ....
Adjusting the Microphone Level ................... 36 Adjusting the Ring Tone Level ...................... 36 Volume Setting ................................................ 36 Setting Audio Mute On/Off while Backing up ................................................................... 37 Default Sound Settings ................................... 37 About the Crossover ........................................... 37 About Time Correction ...................................... 38 Picture Quality Setup ......
USB Flash drive (Optional) Receiving and Tuning to an Alert ..................... 67 Playback ................................................................ 55 Replay Function .................................................. 67 Repeat Play ........................................................... 55 Parental Lock Function ...................................... 68 Random Play ........................................................ 56 Using Jump Memory and Jump Recall function ..................
Info Mode Function ............................................ 77 Switching Display Modes ................................... 77 HDMI Operation Bluetooth Operation Setup Before Using .............................................. 79 About Bluetooth .............................................. 79 About the Hands-free Phone ......................... 79 Before Using Bluetooth .................................. 79 Hands-free Phone Control Answering a Call .................................................
If this Message Appears .................................... 106 Specifications ..................................................... 109 END USER LICENSE AGREEMENT (HERE) ............................................................
Operating Instructions PRECAUTIONS IMPORTANT INFORMATION PLEASE READ CAREFULLY BEFORE USING THIS PRODUCT This product is intended to provide turn by turn instructions to get you to a desired destination. Please make certain that all persons using this navigation system carefully read these precautions and the following instructions fully. • This product is not a substitute for your personal judgment.
WARNING • Operation of the system while driving is dangerous. Users should stop vehicle before operating the software. • Road conditions and regulations take precedence over information contained on the map display: observe actual traffic restrictions and circumstances while driving. • This software is designed for use exclusively in the unit. It cannot and may not be used in conjunction with other hardware. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.
CAUTION This symbol means important instructions. Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing. HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience.
CAUTION Alpine accepts no responsibility for lost data, etc., even if data, etc., is lost while using this product. On Handling USB Flash drive • This unit can control a memory storage device that supports the USB Mass Storage Class (MSC) protocol. Playable audio file formats are MP3, WMA, AAC and FLAC. • USB Flash drive function is not guaranteed. Use USB flash drive according to the terms of agreement. Read the USB flash drive Owner’s Manual thoroughly.
Features The screen design used in the Owner’s Manual may differ from the actual screen. Favorite Function Frequently used functions such as the Audio source or Navigation are easily recalled. Register them to the Favorite screen. For details, see “Favorite Function” (page 24). Favorite screen example • Frequently used functions and useful functions can be customized for your convenience. • You can register up to 54 functions. • You cannot register a function more than once.
Switching the Audio Sources Screen to a Dedicated Screen You can switch the Audio Sources screen to a dedicated screen by touching the icon on one of the four edges of the screen, or by swiping vertically or horizontally. For details on how to swipe the screen, see “Touch Screen Operation” (page 17). Shortcut Setup Screen (page 19) Dual Screen (page 14) You can set the Sound Setup or Rear Seat Entertainment System. You can switch between the displayed screens on the Dual Screen.
About Dual Screen Dual Screen allows you to display the Navigation and Audio/Visual screens simultaneously. Audio full Screen Touch [ ], or swipe to the right. Touch [ ], or swipe to the left. Touch [ ], or swipe to the right. Touch [ the left. Dual Screen ], or swipe to Navigation full Screen * Touch [ ], or swipe to the left to switch to the Navigation menu screen. For details of navigation operations, refer to “Navigation System OM” in the website at http://www.alpine-usa.com.
Getting Started Location of Controls For X108U/INE-W967HD MENU/ (Power Off) button Recalls the Menu screen. Press and hold this button for at least 5 seconds to turn the power off. / button Press to seek down/up a station in radio mode or down/up a track, chapter, etc., in other audio/visual sources. RESET switch The system of this unit is reset. (NAVI/NAV) button Recalls the navigation map screen. Press again to switch to Navigation menu screen.
Turning Power On or Off Initial System Start-Up Some of this unit’s functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake, before attempting these operations. Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc. 1 2 Turn the ignition key to the ACC or ON position. The system turns on.
Touch Screen Operation Switching Sources You can operate the system by using the touch panel on the screen. Press the • Be sure to touch the onscreen button lightly with the pad of your finger to avoid scratching the display. Switching sources using the Touch operation During audio/visual playback, press the (AUDIO) button repeatedly to switch to the desired source. Touch a button or list item on the screen lightly. • If you touch a button and there is no reaction, remove your finger.
Operating the Function Button on the Audio/ Video Main Screen Using the Function button on the Audio/Visual main screen. Touch [ About Basic Operation for List Screen Basic operations on the Setup list screen and the Search list screen. How to display on the list screen differs depending on the selected item. ] to change to the Function mode. HD Radio main screen example Function mode Swipe to the right or left to change to the Function mode. To close the Function mode, touch [ ].
About the Shortcut Setup Screen Displaying the Sound Setup screen, or the Shortcut Setup screen of the Rear Seat Entertainment System screen. Touch [ screen. Sound Setup Function Tone Adjustment mode ] or swipe downward in the Audio source BASS ENGINE SQ mode The Sound Setup screen or the Rear Seat Entertainment System Setup Screen is displayed.
Adjusting Bass Level/Treble Level Bass Level and Treble Level can be set for each front seat and for each rear seat by touching [Front] or [Rear]. Setting item: Bass / Treble Setting contents: -14 to +14 (Initial setting: 0) • When the Sound Setup of the Shortcut Setup is selected to “BASS ENGINE SQ,” you cannot perform the set up. • Adjustment cannot be performed when Defeat is set to “On.
Notification button*1 About the Menu Screen In the menu screen, you can select the audio source and perform various setups or operations on the unit. Use to display the Facebook Notification List on the connected smartphone via this unit. (page 28) • When there is no Notification, “No Notifications.” will be displayed. Press the MENU button. Displays camera images. (page 90) The menu screen is displayed. Setup button Camera button*2 Displays the Setup screen.
About the Indicator Display Opening screen Customization The Indicator Bar at the bottom of the screen displays various types of information, like the current time. You can set a BMP image that is stored on a USB flash drive as the opening screen. This setting requires the following image format, folder name and file name.
How to Input Characters and Numbers (Keypad) The displayed screens and procedures may vary slightly depending on the function used, but the basic input method is the same. Input screen area. Cursor position alteration switch Cancel Keypad mode finishes. (Delete) Returns to the previous character and erases it. Touching here for more than 2 seconds will erase all input characters. Input number is confirmed.
Favorite Function Editing the Favorite Screen You cannot edit the Favorites screen while driving. Using the Favorite Function This unit enables you to recall functions easily by registering frequently used items such as the Audio source, the navigation search function, etc. to the Favorite screen. You can recall any of these items easily. 1 Press the Your vehicle must be parked with the ignition key in the ACC or ON position.
Audio/Visual Changing Item Names [Radio]*1 / [USB/iPod] / [Factory Media (USB/iPod)]*2 / [HDMI] / [Pandora] / [Bluetooth Pandora] / [SiriusXM]*3 or [Factory SiriusXM]*2, 3 / [AUX]*4 / [Bluetooth Audio] or [Factory Bluetooth Audio]*2 *1 You can choose the frequency from Preset 1 - 12, registered into each FM1/FM2/AM band of HD Radio or RBDS. *2 Not displayed when your car does not support the source or “Setting the Source Category” (page 48) is set to “Aftermarket.
Changing the Layout Drag and drop the item to the desired location. The item location is changed. • When you move to other pages, switch pages, or when you make a new page and move to another, drag to the end of the screen, and lift your finger after the page changes. Deleting Items When deleting a selected item 1 2 Touch the checkbox at the left of the item you want to delete and place a check ( ) in it. Touch [ ] (Delete). The selected item will be deleted.
Applying Alpine TuneIt App This unit’s sound tuning is programmable from a connected Smartphone. It is also possible to download specific parameters for certain vehicles from Alpine’s TuneIt database stored in the Cloud. Using the Alpine TuneIt App, customized parameters can also be uploaded for others to share and rate. Through this unit, it is also possible to receive and respond to information from Alpine’s Social Network Service (SNS) available through the connected Smartphone.
Displaying Facebook Screen During Notification incoming or Notification List screen, you can switch to Facebook screen. Facebook screen example Message content Poster’s photo Close button: Close the Facebook screen. Touch the poster’s picture and name to switch to the Facebook screen. The detailed information of Notification is displayed. • Touch [ ] (Back) to return to Notifications List screen. • Depending on the status, contents of message and photo may not be displayed.
3 Setup As the X110 is for specialized vehicles, its initial settings differ from the values shown in this manual. Touch the required setting icon on the upper part of the Setup main screen or swipe the list area vertically, then touch the setting item. Setting items: Wireless: See “Wireless (Bluetooth) Setup” (page 30). General: See “General Setup” (page 32). Source: See “Source Setup” (page 42). System: See “System Setup” (page 45).
Wireless (Bluetooth) Setup Bluetooth Setup [Wireless] is selected on the Setup main screen in step 3. See “Setup Operation” (page 29). [Bluetooth] is selected on the Wireless Setup Menu screen in step 1. See “Wireless (Bluetooth) Setup” (page 30). You can register and set up Bluetooth compatible devices.
2 Touch [ ] (Audio), [ ] (Hands-free) or [ ] (Both) of the device you want to connect from the list. Audio: Sets for use as an Audio device. Hands-free: Sets for use as a Hands Free Device. Both: Sets for use as both an Audio device and Hands Free Device. • You can register up to 5 Bluetooth compatible mobile phones. • You can connect three Bluetooth Devices; two exclusively for Hands-Free Phone and one exclusively for Bluetooth Audio.
3 Enter the passcode that you entered in step 2 again, and then touch [OK]. Changing the Character Code of the Phone Book You can select the character code that is used when transferring the phone book or history from a mobile phone. If unreadable characters appear in the transferred data, select the correct character code. General Setup [General] is selected on the setup main screen in step 3. See “Setup Operation” (page 29).
*2 You can also make the setting in the Bal./Fad. screen. For details on how to adjust, see “Setting the Balance/Fader/Rear Speaker/Subwoofer” (page 33). *3 This setting is only available when “Subwoofer” is set to “On” ( ). *4 When the Defeat setting is “On,” you cannot perform the set up. *5 When the Sound Setup of the Shortcut Setup is selected to ”BASS ENGINE SQ,” you cannot perform the set up. *6 “Video” can be selected while a video is playing.
Setting the Media Xpander (MX HD) Media Xpander (MX HD) makes vocals or instruments sound distinct regardless of the music source. The HD-Radio (FM)/SiriusXM, USB Flash drive and iPod/iPhone, will be able to reproduce the music clearly even in cars with a lot of road noise. Setting item: MX HD • When the Defeat setting is “On,” you cannot perform the set up. • When the Sound Setup of the Shortcut Setup is selected to “BASS ENGINE SQ,” you cannot perform the set up.
Adjusting the Frequency Touch [ ] or [ ] of “Frequency” to adjust the frequency of the selected band. Adjustable frequency bands: 20 Hz to 20 kHz (in 1/3 octave steps) Band1: Band2: Band3: Band4: Band5: Band6: Band7: Band8: Band9: 20 Hz~100 Hz (63 Hz) 63 Hz~315 Hz (125 Hz) 125 Hz~500 Hz (250 Hz) 250 Hz~1 kHz (500 Hz) 500 Hz~2 kHz (1 kHz) 1 kHz~4 kHz (2 kHz) 2 kHz~7.2 kHz (4 kHz) 5.
Adjusting the Time Correction (TCR) Before performing the following procedures, see “About Time Correction” (page 38). Setting item: Time Correction Setting the Volume for Each Source Setting item: Source Volume Setup Radio / SiriusXM / Compressed Media*1 / iPod Music / iPod Video or AUX*2, 3 / HDMI*3, 4 / Bluetooth Audio / Factory Audio*5 Setting contents: -14 to +14 (Initial setting: 0) *1 Compressed Media is the music data in a USB flash drive (MP3/ WMA/AAC/FLAC).
Setting Audio Mute On/Off while Backing up The sound can be muted when the shift gear lever is set to the reverse (R) position enabling you to easily hear sensors, etc., while reversing your car. Setting item: Mute While Backing Up Setting contents: Off / On (Initial setting) Off: On: Does not mute. Mutes when the shift gear lever is set to the reverse (R) position. Default Sound Settings About the Crossover Crossover (X-Over): This unit is equipped with an active crossover.
About Time Correction Example 2. Listening Position: All Seats Adjust the time correction level of each speaker to almost the same level. The distance between the listener and the speakers in a car vary widely due to the complex speaker placement. This difference in the distances from the speakers to the listener creates a shift in the sounds image and frequency characteristics. This is caused by the time delay between the sound reaching the listener’s right versus the left ear.
Picture Quality Setup [Picture Quality] is selected on the General Setup Menu screen in step 1. See “General Setup” (page 32). You can set up items related to an image. Adjusting Brightness Setting item: Brightness Setting content: -15 to +15 (Initial setting: 0) You can adjust the brightness between MIN (-15) and MAX (+15). When it reaches the minimum or maximum point, the display shows “MIN” or “MAX” respectively.
Display/Key Setup [Display/Key] is selected on the General Setup Menu screen in step 2. See “General Setup” (page 32). You can set up the brightness, color, display, etc., of the screen. Adjusting the Minimum Level of Backlight You can adjust the brightness of the backlight. This function could be used, for instance, to change the screen brightness while traveling at night.
General Setup [General] is selected on the General Setup Menu screen in step 1. See “General Setup” (page 32). You can set up items related to the language, etc. Initializing the System You can initialize all data, to restore the factory settings. Remove the USB flash drive, etc. from the system before operation Setting item: Clear All Settings 1 2 3 Touch [Reset] of “Clear All Settings.” After the confirmation message appears, touch [OK]. The confirmation screen appears again. Touch [OK].
Source Setup [Source] is selected on the Setup main screen in step 3. See “Setup Operation” (page 29). Radio Setup [Radio] is selected on the Source Setup Menu screen in step 1. See “Source Setup” (page 42). Source Setup Menu screen Radio Setting the TUNER (FM) Tone Quality (Tuner Condition) This unit can set your preferred tone quality for FM radio source.
Setting the Alert individually for an Artist/ Song/Favorite Team This menu option allows you to enable the Artist/Song/Team alert for individual Artists/Songs/Teams (On or Off) or to delete individual stored Artist/Song/Team alerts (Delete). Setting item: Alert Setup Setting the Favorite Sports Team Alerts This menu option allows you to select your favorite teams, organized by leagues, so that you will be alerted later when your favorite teams are playing on other channels.
2 3 Touch the numeric keypad to input a 4-digit passcode. The initial default 4-digit passcode is set to 0000. After entering the digit, it is displayed as “*” (asterisk). • Touch [ ] to delete an entered number. • Touch [Delete All] to delete all entered numbers. Touch [Enter]. AUX Setup (X108U/INE-W967HD only) [AUX] is selected on the Source Setup Menu screen in step 1. See “Source Setup” (page 42). You can set up the items related to the Auxiliary device.
Setting the Auxiliary (AUX) Name Make sure the AUX is set to “On” ( W967HD only)” (page 44). System Setup ). See “AUX Setup (X108U/INE- Setting item: AUX Name Setting contents: AUX (Initial setting) / AUX DVD / GAME / External DVD / DVD Changer / DVB-T / TV [System] is selected on the Setup main screen in step 3. See “Setup Operation” (page 29).
Camera Setup [Camera] is selected on the System Setup Menu screen in step 1. See “System Setup” (page 45). You can set up items related to the Camera. Multi View compatible Front Camera/Rear Camera 2 Touch [Back], [Panorama], [Corner], or [Top]. The view will change to the selected view. • [Back] will not appear for the Front camera. • For an explanation of video patterns, see the camera Owner’s Manual. Adjusting the Rear/Front/Side Camera Guide You can adjust the camera guide position.
Front Camera screen example When Hitch Guide is set to On Side Camera screen example 4 Touch [ guide. ], [ After the adjustment is completed, touch [Set]. Adjusting Guides Simultaneously (for Rear/Side Camera only) 1 Touch [Link]. The 2 vertical guides of the currently-selected guide link together, allowing them to be adjusted simultaneously.
Setting Multi Camera to On/Off Setting the Source Category When connecting the optional Multi Camera Interface module, you can connect up to 3 cameras as Front Camera/Rear Camera/Side Camera. You can set whether the following source icon in the Menu screen is available. • When using the optional Multi Camera Interface module, select “Camera Selector” to set the “Front Camera /Rear Camera/Side Camera” to ”On”( )/”Off ”( ).
Remote Sensor Setting Rear Seat Entertainment Setup [Rear Seat Entertainment] is selected on the System Setup Menu screen in step 1. See “System Setup” (page 45). When a Rear monitor equipped with HDMI input is connected to this unit, change this setting to “On.” You can output images to the Rear monitor. For details, see “Rear Seat Entertainment Function” (page 20).
Setting the Additional AUX BOX When displaying an AUX image in the rear monitor, you need an external AUX distribution box. When using an external AUX distribution box, set to “On” ( ). Smartphone Apps Setup [Smartphone Apps] is selected on the System Setup Menu screen in step 1. See “System Setup” (page 45). Setting item: RSE Aux Switch Box Setting contents: Off (Initial setting) / On Setting the HDMI Selector On/Off If you connect an HDMI selector, you can connect two HDMI devices.
Radio/HD Radio™/ RBDS The unit can receive HD Radio signals based on digital radio broadcast standards, in addition to analog radio broadcasts using RBDS. HD Radio signals are broadcast in the service areas of the current AM/ FM broadcasters where they provide digital audio distribution and data services. This unit receives the above digital broadcasts for your highquality sound enjoyment.
Radio Basic Operation Listening to the Radio 1 2 3 4 5 (AUDIO) button to select radio mode. Press the The display shows the radio mode screen. • You can select and change the source from the Menu screen (page 21) or the Favorite screen (page 24). Touch [ Presetting Stations Manually 1 2 3 ]. ]. Repeat the procedure to store up to 11 other stations onto the same band. To use this procedure for other bands, simply select the desired band and repeat the procedure.
Inputting Frequency Directly and Receiving the Radio Station Selecting the Receivable Program Type (RBDS FM Radio mode only) You can input a frequency of the same band directly and receive the radio station. You can select and receive the currently receivable stations in the Program Type list screen. 1 Touch [ 2 Touch a desired number. ] (Direct Tune). Program Type list screen example The numeric keypad input mode screen appears.
Using Ballgame Mode In live broadcast, such as sportscasts, etc., a time lag occurs between digital sound and analog sound. Therefore, when live broadcasts are received, a time lag between the real broadcast may occur and the unit can change to analog broadcasting automatically. Touch [ ] (Live) to switch On/Off. LIVE Indicator The LIVE Indicator is displayed when Ballgame Mode is set to “On.” • When receiving a live broadcast while the Ballgame mode is on, the LIVE indicator is highlighted.
USB Flash drive (Optional) You can play back music files (MP3/WMA/AAC/FLAC) stored in a USB flash drive on the internal player of this system. USB Audio main screen example Playback 1 Press the 2 Touch [ (AUDIO) button to select USB mode. The display shows the USB mode screen. • You can select and change the source in the Menu screen (page 21) or Favorite screen (page 24). ] or [ ] or to select the desired track (file).
Random Play 1 Touch [ 2 Select your desired Random Play mode. ]. The Random Play mode select pop up screen is displayed. • The [ ] button displays the currently selected mode. ALL : Folder File : OFF : All songs in the USB flash drive are played back in random sequence. Any one song does not play back again until all songs have been played back. : A Folder is selected randomly and songs in the Folder are played back in order.
iPod/iPhone (Optional) A separately sold USB iPod/iPhone AV cable (KCU-461iV) or a separately sold Lightning to USB cable (KCU-471i) is required depending on the type of iPod/iPhone. When the unit is connected by the above cable, the controls on the iPod are disabled.
Artist title/Release Date* Song title/Episode title* Album title/Podcast title* Total time for playing Elapsed time Quick Search button Touch or swipe to the right when using Quick Search mode. : During audio-only playback of a music file in a video Playlist, the Music icon is displayed. Info mode switching button (Video mode only) Info mode display * Podcast mode. 3 To pause playback, touch [ / ].
Full Search Mode For example: Searching by Artist name The following example explains how an Artists search is performed. Another search mode can be used for the same operation, although the hierarchy differs. 1 2 Touch [Artists] in the Full Search mode screen. The Artists search screen is displayed. • To switch into Full Search mode, see screen example” (page 58). in “Quick Search mode Select the desired artist. To play back the Artist directly 1 Touch [ ] of the artist’s name.
Cinema mode Repeat Play Touch [ ] to repeatedly play back the currently track. The tracks (files) will be played repeatedly. Touch [ ] again to deactivate Repeat play. Track Repeat OFF Track Repeat Random Play (Shuffle) 1 2 Touch [ ]. The Random Play mode select pop up screen is displayed. • The [ ] button displays the currently selected mode. The selected Random Play mode changes the button. : Album OFF All files in the iPod are played back in random sequence.
Pandora® internet radio (optional) Function mode Pandora® internet radio is your own FREE personalized radio now available to stream music on your Smartphone (which runs Android OS, iOS or BlackBerry OS). Just start with the name of one of your favorite artists, songs or classical composers and Pandora® will create a “station” that plays their music and more music like it.
“Thumbs” Feedback Creating a New Station You can personalize your stations with “Thumbs Up” or “Thumbs Down” feedback, which the system takes into account for future music selections. Basing on the currently playing song or artist, a personalized Pandora station can be created. The new station will play more music like it. During playback, touch [ ] for thumbs up, or touch [ ] for thumbs down. : : The “ ” indicator appears in the display. Pandora® will add similar music to your station.
Connecting a Bluetooth Device (Bluetooth Pandora® Only) Registering a Bluetooth device in the unit enables automatic connection. If it does not connect automatically, run through the connection procedure again. 1 Touch [ 2 Touch [Reconnect]. ] (Settings). The Device Setting select pop up screen is displayed. Bluetooth connection will start. Disconnecting the Bluetooth Connection 1 Touch [ 2 Touch [Disconnect]. ] (Settings). The Device Setting select pop up screen is displayed.
SiriusXM Satellite Radio Operation (Optional) SiriusXM Tuner operation: When an optional SiriusXM Tuner is connected to this unit, the following operations may be performed. SiriusXM main screen example (Song Info. Mode) < During Replay mode> Signal Indicator Indicates the signal strength of SiriusXM. Info area Station Info. Mode*: Channel No/Long Channel Name/Category Name Song Info.
Receiving Channels with the SiriusXM Tuner Changing the Display About SiriusXM Satellite Radio Text information, such as the channel name, artist name/feature, and song/program title, is available with SiriusXM or channel. The unit can display this text information as explained below. Everything worth listening to is on SiriusXM, getting over 130 channels, including the most commercial-free music, plus the best sports, news, talk and entertainment. A SiriusXM Tuner and Subscription are required.
Tune Start Function Use Tune Start to play music content from its beginning on programmed preset stations. The user can, therefore, enjoy the full track (i.e. song) rather than hearing what’s left from its current live playback position. 1 Touch and hold [ ] (Tune Start) for at least 2 seconds to activate or deactivate the Tune Start function. When the Tune Start function is activated, [ highlighted. 2 ] (Tune Start) is • During Tune Scan mode, the artist and song name will be displayed.
Searching by Featured Favorites 1 Touch [Featured]*. The Category that SiriusXM recommends will be displayed in a list. * Displayed only when the SiriusXM Tuner-SXV200 is connected. 2 3 Touch the desired category. You can directly select the channel number on the display of the numeric keypad. 2 3 Touch [ ] (Direct Tune). The numeric keypad input screen is displayed. Touch to input the channel number. Touch [Enter]. The selected channel is received.
3 Touch [ ] to exit Instant Replay and listen to live content. • To fast reverse, touch and hold [ ] and to fast forward, touch and hold [ ]. • Touching [ ] or [ ] will move a track up/down. • If you change channels while in Replay mode, the contents of the replay buffer are emptied. • The allowed recording time differs depending on the SiriusXM Tuner box. Parental Lock Function This function can help restrict the listening of channels to children of appropriate age levels only.
HDMI Device (X110 only) For X108U/INE-W967HD (DVE-5300) For X108U/INE-W967HD, when you connect an optional DVE-5300 (DVD Player), you can operate it from the unit. When making HDMI connections, you need to set HDMI on the unit suitable for the connected device. For details, see “HDMI Setup” (page 45). For details on how to operate the DVD player, see “DVD Player Operation” (page 69). For details on how to operate iPhones and Smartphones, see “HDMI Operation” (page 78).
System Setup Switching the Bar Color Select the colors (8) used for highlighting items in the System Setup screen. Setting items: Bar Color Setting contents: Blue / Green / Light blue / Amber (Initial setting) / Aqua blue / Yellow / Red / White Setting the TV Screen Mode Setting item: TV Screen Aspect Setting contents: 16:9 (Initial setting) / 4:3LB / 4:3PS • For some discs, the picture may not be set to the selected screen size. (For details, refer to the explanation on the disc’s jacket.
• Languages set upon shipment from the factory: Audio language : Auto Subtitle language : Auto Menu language : Auto • Touch [ ] (Return) to return to the previous display. Digital audio output Disc Format Setting item: CD Play Mode Setting contents: CD-DA / Compress (Initial setting) This unit can play back CDs containing both CD and MP3/WMA/AAC/ WAV data (created in Enhanced CD (CD Extra) format). CD-DA: Compress: PBC On: PBC Off: The PBC menu is displayed. The PBC menu is not displayed.
CD/MP3/WMA/AAC/WAV MP3/WMA/AAC main screen example Fast forward : Touch and hold [ • The ]. , buttons provide the same functions above. Info mode 3 Function mode (MP3/WMA/AAC) • The unit can play back MP3/WMA/AAC/WAV files saved to CD or DVD. For further information about playing or storing MP3/WMA/AAC/ WAV files, see pages 101 and 102 before using the unit. • Any file protected by DRM (Digital Rights Management) copy protection, cannot be played back on this unit.
DVD MIX (Random Play) Touch [ ] during playback. The tracks (files) on the disc will be played back in a random sequence. The MIX mode switches every time [ DVD Video main screen example ] is touched. CD: MIX Off MIX MP3/WMA/AAC: MIX Folder*1 MIX Disc*2 Off MIX Folder*1 *1 Only files in a folder are played back in random sequence. *2 All files on the disc will be played back in a random sequence. • If the MIX mode is activated during Repeat playback, the Repeat Play mode will be canceled.
Info mode Playing a Disc WARNING It is dangerous for the driver to watch the DVD while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur. Install the unit correctly so that the driver cannot watch DVD unless the vehicle is stopped and the emergency brake is applied. Current track no. Playback control (PBC)/Current audio status Elapsed time Disc types that can be used for each heading are represented by the following marks.
If a Menu Screen Appears Numeric Keypad Input Operations On DVD mode, menu screens may appear automatically. If this happens, perform the operation described below to start playback. Direct Menu Operations 1 1 Touch [key] again in the menu operation mode. 2 Touch a desired number. The numeric keypad input mode screen appears Touch the screen while the DVD menu is being displayed. Directly touch operation switches displayed on the screen to operate.
Stopping Playback Forward/Reverse frame-by-frame Playback Touch [ ] during playback. “ ” indicator is displayed, and playback stops. 1 In the pause mode, touch [ Fast-forwarding/Fast-reversing 2 Touch [ 1 • No sound is output during forward frame-by-frame playback. • You can only execute reverse frame-by frame playback when playing DVD-V. • Playback starts from the beginning when [ playback is stopped.
Searching by Title Number Switching the Audio Tracks Use this function to easily find positions on the DVD using the DVD’s titles. Perform operations while playback is stopped. DVDs with multiple audio tracks or languages allow switching the sound during playback. 1 Touch [ 2 3 Touch [ ] (Menu Control). The sound switches between the alternate audio tracks recorded on the disc every time the button is touched. Touch [Key] again in the menu operation mode.
HDMI Operation WARNING It is dangerous for the driver to watch the HDMI image while driving the vehicle. The driver may be distracted from looking ahead and an accident may occur. Switching the source when two HDMI devices are connected You can switch the source only when you have connected the HDMI selector and “Setting the HDMI Selector On/Off ” (page 50) is set to “On.
Bluetooth Operation Setup Before Using About Bluetooth Bluetooth is a wireless technology allowing communication between a mobile device or personal computer over short distances. This enables a hands-free call or data transmission between Bluetooth compatible devices. Bluetooth transmission is available in the unlicensed 2.4 GHz spectrum if the distance between devices is within 10 meters. For details, refer to the Bluetooth website (http://www.bluetooth.com/).
Answering a Call Call Waiting Function Incoming calls are announced by the received call ring tone and a displayed message (PHONE No., etc.). If a call comes in from another phone during a call, a notice is displayed on the screen. This function can only be used if the connected mobile phone has a call waiting function service included. 1 An incoming call triggers the ringtone and an incoming call display.
Second incoming call during a conversation in the Phone Operation screen • The display or operation may differ depending on the connected mobile phone or the caller’s mobile phone. Second incoming call notification screen 2 Touch the Short Cut icon. 3 Touch [Call]. A contact’s name, phone number, and a confirmation message of the phone number are displayed. The phone call is started. Making a phone call using the Phone Menu Making a phone call from the Recent Events list 1 Touch [ screen.
Entering a Phone Number to Make a Call 1 Touch [ 2 ] (Keypad). The number input screen (Keypad) appears. 3 Speak into the microphone supplied with this unit. • If no speech is detected, the unit may pause depending on version of the connected iPhone. In that case, touch the microphone icon [ ] in the center of the Voice Control mode screen. You can continue to use the Voice Control mode. To finish the Voice Control mode, touch [ ] or press and hold the (AUDIO) button for at least 2 seconds.
Adjusting the volume Adjust the speaker/microphone volume in Voice Dial mode. Perform the same procedure to adjust the speaker/microphone volume of handsfree phone. Phone Book Function Phone Book screen example Touch [ ] or [ ]. Adjust the speaker and microphone volumes. Stopping input to the microphone If the surrounding sound (road noise, etc.) is loud, you may wish to cut input to the microphone for 3 seconds. Touch [ ].
Deleting the Phone Book Entries Deleting One Entry from the Phone Book 1 2 Touch [ ] (Edit). Touch the checkbox [ ] of the contact name (or phone number) you want to delete. A tick ( ) appears in the checkbox. Bluetooth Audio If a Bluetooth compatible mobile phone, portable player, etc. is connected by wireless, you can play back a song (operation is controllable from the unit). • Operation may vary, depending on the Bluetooth compatible device.
• To play back audio, a mobile phone or a portable player conforming to A2DP (Advanced Audio Distribution Profile) or AVRCP (Audio/Video Remote Control Profile) is required. Not all functions work with all devices. • During a call, sound on the Bluetooth audio source is paused. Compatible AVRCP versions: 1.0, 1.3, 1.4, 1.5 • Available functions may differ depending on the AVRCP version. Playback 1 2 (AUDIO) button to select Bluetooth Audio Press the mode. Random Play Available for AVRCP Ver. 1.3, 1.
Connecting a Bluetooth Device Registering a Bluetooth device in the unit enables automatic connection. If it does not connect automatically, run through the connection procedure again. 1 Touch [ 2 Touch [Reconnect]. ] (Settings). The Device Setting select pop up screen is displayed. Bluetooth connection will start. Disconnecting the Bluetooth Connection 1 Touch [ 2 Touch [Disconnect]. ] (Settings). The Device Setting select pop up screen is displayed. The Bluetooth connection is disconnected.
Auxiliary Device (X108U/INE-W967HD only) (Optional) Operating an AUX, AUX DVD, GAME or USB Player Example for AUX, AUX DVD, GAME, USB Player mode display Operating Auxiliary Devices (Optional) To operate devices connected to the AUX terminals of the unit, follow the procedure described below. • Set AUX to “On.” See “AUX Setup (X108U/INE-W967HD only)” (page 44). • Depending on the connected unit, the onscreen buttons may not work, or their operation may differ.
[ ] (Top Menu) External DVD changer screen example Calls up the Top Menu screen. [ ] (Menu) Calls up the Menu screen. [ ] (Menu Control)* Calls up the menu operation mode. [ ] (Folder Down) Switches the program/playlist/folder down. [ ] (Folder Up) Switches the program/playlist/folder up. [ ] (Display Mode)* You can set the Display Mode. For details, see “Switching Display Modes (During Video File Play Back)” (page 60). [ ] (Angle) [Disc1]-[Disc6] Switches angle. [ Selects a Disc.
Operating a TV Menu operation mode screen example [ ], [ ] Switches the Channel number / Preset channel down. [ ], [ ] Switches the Channel number / Preset channel up. [ ] (Band) Switches the band. [ ] (Tune) (Channel or Preset or Manual) Switches amongst Channel mode, Preset mode, and Manual mode. [ ] (Auto Preset) The tuner automatically seeks and stores stations. [ ] (Display Mode)* You can set the Display Mode.
Camera Operation (Optional) When an optional camera is connected, the view video of camera can be output to the monitor. Front camera, Rear camera or Side camera can be connected to this unit. Make the Camera Select setting (Front, Rear, Side or Other) according to your connected camera. For details, see “Setting the Camera Input” (page 46). When using the optional Multi Camera Interface module, you can connect up to 3 cameras: Front Camera, Rear Camera, and Side Camera.
2 Touch [Guide Off] or [Hitch Guide Off] on the Rear camera display screen. The guide disappears, and then the [Guide Off] or [Hitch Guide Off] switch changes to [Guide On] or [Hitch Guide On]. 3 Touch [Guide On] or [Hitch Guide On] to turn on the guide. Adjusting the Caution Display Location 1 Touch the screen when the image from the camera is displayed. The operation screen is displayed on the screen. • After a 5-second time-out, the operation screen returns to the camera display screen.
Actual distances Front Camera Operation Displaying the Front Camera image from the Menu screen. 1 Press the MENU button. The menu screen is displayed. Error Error The distance guidance mark represents the distance to a flat road surface. Therefore in the case of an upward slope behind the car, the distance guides are displayed closer to the rear bumper than the actual distance.
About the adjustment of guide display ON/ OFF setting and adjustment of Caution display location As with the rear camera, the front camera guide display ON/OFF setting and Caution display location can be adjusted. See “Guide Display ON/ OFF Setting” (page 90) and “Adjusting the Caution Display Location” (page 91) for the operations. Side Camera Operation If the camera has a view switch function, the Direct Change switch is displayed. 1 Press the MENU button. The menu screen is displayed.
iDataLink Operation When the unit is connected to the car’s iDataLink module, you can transfer and receive data between the car and the unit to check the car’s status, or to make various operations from the unit. When you use iDataLink mode, set each setting other than “Aftermarket” in “Setting the Source Category” (page 48). 3 Adjust or confirm the item/information accordingly. • Operable functions and displays may differ depending on the vehicle.
Vehicle Information screen example Parking Sensor Camera interlock screen example (Rear camera) You can check for open doors, check the tire pressure, the battery life, etc. for the vehicle. You can check for obstacles through an interlocked camera image by connecting a Front or Rear Camera. Car Setting screen example (Generic List screen) • Touch the Camera image area to switch to the Camera full screen.
When changing the name: Touch the icon name, then input characters into Edit Name (Keypad). You can also select a basic name from the [Template] of the Keypad. For details on how to input characters using the keypad, see “How to Input Characters and Numbers (Keypad)” (page 23). (When a basic name is selected from the Template, the icon will be changed according to the basic name.) When changing the layout of the switches: Drag and drop an icon to the desired location.
About Remote Control Operation (X110 only) Battery Replacement Battery type: CR2025 battery or equivalent. 1 Opening the battery case 2 Replacing the battery Slide out the battery cover while firmly pressing in the direction of the arrow. Put the battery in the case with the (+) indication upward as shown in the illustration. When Using the Remote Control • When you first use the remote control, please remove the insulation sheet in the battery case.
Operating the DVD Player DVD/Video CD mode: • Move to the desired position on the disc. • During playback, press and hold for more than 1 second to reverse the disc at double speed. Hold for more than 5 seconds to reverse the disc at 8 times the normal speed. Hold for more than 10 seconds to reverse the disc at 32 times the normal speed. • The picture is reversed by one frame each time the button is pressed in the pause mode (DVD only). / button Switches between play and pause.
Information Irregular Shaped Discs Be sure to use round shaped discs only for this unit and never use any special shaped discs. Use of special shaped discs may cause damage to the mechanism. Product Software Update This product use software that can be updated through a USB flash drive. Download the software from the Alpine website and update the product using the USB flash drive. Updating this product Check the Alpine website for details on updating. http://www.alpine-usa.
Disc Accessories Video CDs There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause operational problems. We recommend not using these accessories on discs played in Alpine DVD players. This DVD unit is compatible with playback control (PBC) compatible video CDs (version 2.0).
What is MP3? On handling compact discs (CD/CD-R/CD-RW) • • • • • • Do not touch the surface. Do not expose the disc to direct sunlight. Do not affix stickers or labels. Clean the disc when it is dusty. Make sure that the disc is smooth and flat. Do not use commercially available disc accessories. Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the disc and you may not be able to play it again.
ID3 tags/WMA tags Terminology This device supports ID3 tag v1.0, v1.1, v2.2, v2.3, v2.4, and WMA tag Ver.1.x. If tag data is in an MP3/WMA/AAC file, this device can display the title (track title), artist name, and album name ID3 tag/WMA tag data. For non-supported characters, “?” is displayed. The number of characters may be limited, or not correctly displayed, depending on the tag information. Playing back MP3/WMA/AAC/FLAC MP3/WMA/AAC files are prepared, then written to a USB flash drive.
About DVDs Music CDs and DVDs have grooves (tracks) in which the digital data is recorded. The data is represented as microscopic pits recorded into the track – these pits are read by a laser beam to play the disc. On DVDs, the density of the tracks and pits is twice that of CDs, so DVDs can contain more data in less space. CDs Minimum pit length 0.9 μm 1.2 mm Track pitch 1.6 μm DVDs Minimum pit length 0.9 μm 0.6 mm 0.6 mm Track pitch 0.
List of Language Codes (For details, see page 70.) Abbreviation AA AB Abbrevldon Code Abbrevl.
In Case of Difficulty If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected, or then consult your authorized Alpine dealer. Basic No function or display. • Vehicle’s ignition is off.
Disc playback sound skips due to vibration. • Improper mounting of the unit. - Securely re-mount the unit. • Disc is very dirty. - Clean the disc. • Disc has scratches. - Change the disc. • The pick-up lens is dirty. - Do not use a commercially available lens cleaner disc. Consult your nearest Alpine dealer. Disc playback sound skips without vibration. • Dirty or scratched disc. - Clean the disc; a damaged disc should be replaced. CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW playback not possible.
Bluetooth Please connect a Bluetooth audio device. • The Bluetooth audio device was not connected correctly. - Check the settings for the unit and the Bluetooth audio device and reconnect. Unable to download phonebook. • Phonebook failed to read due to mobile phone disconnection, etc. - Check the mobile phone connection, and then conduct synchronizing and adding again. (See page 83) • The connected mobile phone does not support synchronizing of its phone book.
Applying Alpine TuneIt App You can not use Sound App Because External AP is on. • “Setting the External Audio Processor” (page 49) is “On.” - When “External Audio Processor” (page 49) is set to “On,” you cannot perform Sound Tuning from the Alpine TuneIt App. Set “External Audio Processor” to “Off ” to perform Sound Tuning from the Alpine TuneIt App. ILLEGAL FORMAT • A disc with an unsupported region code or other copyright infringement has been inserted. - Change to another disc.
Bluetooth SECTION Specifications Bluetooth Specification Output Power Profile MONITOR SECTION Screen Size 10” (X110) 8” (X108U) 7” (INE-W967HD) LCD Type Transparent type TN LCD Operation System TFT active matrix Number of Picture Elements 1,152,000 pcs. (800 × 480 × 3 (RGB)) Effective Number of Picture Elements 99% or more Illumination System LED Tuning Range Mono Usable Sensitivity 50 dB Quieting Sensitivity Alternate Channel Selectivity Signal-to-Noise Ratio Stereo Separation Capture Ratio 87.
NOSE/CHASSIS SIZE For X110 X110 is sized exclusively for a certain car model. CD/DVD SECTION X108U Frequency Response Wow & Flutter (% WRMS) Total Harmonic Distortion Dynamic Range Channel Separation Horizontal resolution Video output level Video S/N ratio Audio S/N ratio 147 mm (5-7/8”) 178 mm (7-1/8”) CD: 5 – 20,000 Hz (± 1 dB) Below measurable limits 0.02 % (at 1 kHz) 95 dB (at 1 kHz) 65 dB (at 1 kHz) 500 lines or greater 1Vp-p (75 ohms) DVD: 60 dB 95 dB PICKUP 190.
END USER LICENSE AGREEMENT (HERE) In using this Navigation System (hereinafter referred to as “System”), which includes Alpine Electronics, Inc. (“Alpine”) Specifications, Space Machine, Inc. (“Space Machine”) Software and HERE North America, LLC. (“HERE”) Database, you are bound by the terms and conditions set forth below. By breaking the seal on the System and using your copy of the System, you have demonstrated your agreement to the terms and conditions of this Agreement.
LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. (“Alpine”), is dedicated to quality craftsmanship and is pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below. PRODUCTS COVERED: This Warranty covers Car Audio Products and Related Accessories (“the product”). Products purchased in the Canada are covered only in the Canada. Products purchased in the U.S.A.
About the Rules of Bluetooth Electromagnetic Radiation Regulation USA/Canada FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules.
Chevrolet/GMC FULL SIZE TRUCK z 1/17 CHEVROLET/GMC X110-SLV/X110-SRA Installation Manual z Model: Full Size Truck z Model Year: 2014-UP (Not compatible with BOSE® Sound System) CHEVROLET SILVERADO GMC SIERRA Model Year WT, LS, LT, LT Z71, LTZ, LTZ Z71 2014-UP SIERRA, SLE, SLT 2014-UP * The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Chevrolet/GMC z 2/17 FULL SIZE TRUCK Types of Precautions Indicates actions that are forbidden (must not be performed) Indicates actions that are mandatory (must be performed) Mandatory Forbidden Indicates that disassembly is forbidden. Marks content that should receive your full attention. Forbidden Warning Do not disassemble or modify the product. Doing so could lead to an accident, fire, or electric shock. Forbidden Store screws and other small objects where small children cannot reach them.
Chevrolet/GMC FULL SIZE TRUCK z 3/17 When making a hole in the vehicle body, be careful to avoid damaging pipes, the fuel tank, electrical wiring, and the like. This kind of damage could lead to an accident or fire. When installing and grounding the product, do not use any of the bolts or nuts of the steering wheel, brakes, fuel tank, or the like. Doing so could make the brakes stop working or lead to fire. Forbidden Do not install the product near the passenger-side airbag.
Chevrolet/GMC z 4/17 FULL SIZE TRUCK Tools Required Pliers T15 Torx Screwdriver #2 Phillips Screwdriver 7mm Screwdriver Wire Cutters Extension Ratchet 7mm Panel Removing Tool 10mm Socket
Chevrolet/GMC FULL SIZE TRUCK z 5/17 Accessory List Source Unit Box Parts (X110-G) Display Monitor X110-G Source Unit HDMI Cable Bracket 8mm x 8 Screws GPS Antenna USB Extension Cable Pre Out Harness Direct Camera Adapter Display Cable HDMI Cable Bracket DVE-5300X DVD Player Unit 8mm x 4 Screws HDMI Cable Remote Control DVD Player Box Parts (DVE-5300X)
Chevrolet/GMC FULL SIZE TRUCK z 6/17 Installation Kit Parts (G-KTX110-GM1/GM2) Radio Dash Bezel Key Harness Display Mounting Brackets Vent Covers DVD Player Mounting Brackets Source Unit Mounting Brackets iDatalink Maestro Box Parts (ALP-MRR V2.
Chevrolet/GMC FULL SIZE TRUCK z 7/17 Programming the iDatalink® Maestro Module 1 INSTALL THE WEBLINK PLUG-IN Go to: idatalinkmaestro.com/plugin and follow the installation steps. 3 CONNECT YOUR MAESTRO MODULE 4 LOG INTO WEBLINK 5 PROGRAM YOUR MODULE Use the included USB cable to connect your Maestro module to your PC. Review the System Requirements before installing. If the plugin is already installed, the caution, “The plugin is already installed” appears. Please skip to step 2.
Chevrolet/GMC FULL SIZE TRUCK z 8/17 Factory Radio Removal Procedure 1 2 Disconnect the ground wire from the negative terminal of the battery. Unsnap and remove center dash trim piece from around the radio and climate controls. 4 5 Disconnect and remove the radio tuner by lifting the center tab. Use a pair of pliers to remove the FM and SXM antenna connectors. Remove the CD player by extracting (2) 7mm factory screws. Remove the climate control module by carefully unclipping it from factory panel.
Chevrolet/GMC FULL SIZE TRUCK z 9/17 Factory Radio Removal Procedure 7 Unsnap the steering wheel lever and remove the lower cover from the steering wheel column. 10 For trucks equipped with OEM camera, disconnect the Gray 12-pin connector from the HMI box and connect it to the OEM Camera adapter. OEM Camera Glove box USB 8 Remove the passenger’s side top and bottom glove box compartments by extracting (6) T15 Torx screws. 11 Remove the bottom tab on the green USB connector using a razor blade.
Chevrolet/GMC z 10/17 FULL SIZE TRUCK X110-G Wiring Diagram To Vehicle Connectors Power/Speaker OEM Camera Adapter 16-pin Green Connector 12-pin Gray Connector OEM Audio 20-pin Gray Connector To OBDII Connector Climate Control Steering Wheel T-Harness 10-pin Gray Connector To Climate Controller To Steering Wheel Blue Power Antenna 10-pin Black Connector 18-pin Black Connector 10-pin Black Connector Blue/White Amp Turn-on Brown Rear Mon. Remote Out Brown/White Rear Mon.
Chevrolet/GMC z 11/17 FULL SIZE TRUCK BRKT MONITOR UPR 10GM DISPLAY MONITOR UP HARD KEY BUTTONS BRKT MONITOR LWR 10GM CLIMATE CONTROLLER DVE-5300X DVD PLAYER KCX-630HD (Optional) HDMI Selector Interface POWER HDMI OUT HDMI IN 1 HDMI IN 2 USB POWER Opt. Out Cut loop when connecting HDMI interface box.
Chevrolet/GMC FULL SIZE TRUCK z 12/17 Component Locations GPS Antenna Radio Tuner DVD Player OBDII Connector Steering Wheel Harness Sirius XM Tuner (sold separately) OEM Camera Connector GPS Antenna Installation IMPORTANT: Follow the GPS installation procedure shown below. Failure to do so, will result in poor GPSperformance. Place the GPS antenna on the center of the self adhesive 70mm X 70mm metal plate.
Chevrolet/GMC FULL SIZE TRUCK z 13/17 X110-G Restyle Bezel Assembly 1 2 Attach the factory HVAC controller by clipping it to the X110-G Restyle bezel. Attached the top and bottom brackets to the X110-G display using the provide 8mm screws. Exploded-View Diagram A/C TEMP OEM Climate Controller 3 Mount the display monitor to the restyle panel using (4) 8mm screws.
Chevrolet/GMC FULL SIZE TRUCK z 14/17 Installation Instructions 1 Connect the steering wheel T-harness/OBDII connector extension and route the cable to the radio location. 4 Connect the DVD player power harness and HDMI cable from the DVD player to the X110-G. SW T-Harness OBDII Connector 2 3 Slide the X110-G radio tuner into the factory tuner location and connect it to the main harness. Attached the updated Maestro module to the main harness and plug the main harness to the vehicle.
Chevrolet/GMC z 15/17 FULL SIZE TRUCK Installation Instructions 7 Connect the X110-G to the main harness and antenna connections. 10 Attach the side vent covers. MENU CAM WAV A/C 8 Connect the X110-G display and snap into place. Display Cable Climate Control 9 Power Key Harness Secure the X110-G restyle bezel using (4) 7mm factory screws. 11 Connect the battery terminal and begin the X110-G setup.
Chevrolet/GMC FULL SIZE TRUCK z 16/17 Set Up Guide 1 2 3 4 5 6 7 8 9 Turn the vehicle’s Ignition switch to ACC. Turn ON the X110-SLV by pressing any key. Select the user language and press OK. Press and release the parking brake twice. If a camera is present, turn it ON in the system menu. (MENU/SETUP/SYSTEM/CAMERA/CAMERA SELECT) AUDIO MUTE ON REVERSE- By default, when the vehicle is shifted into reverse the AUDIO will MUTE.
Chevrolet/GMC FULL SIZE TRUCK z 17/17 Troubleshooting Guide Symptom Possible Cause Remedy 1 iDatalink website says serial number is invalid. Serial number may not be in iDatalink database. Call ADS at 1-866-427-2999 and verify. 2 Headunit will not turn on. Incorrect serial number was used when flashing maestro. Flash Maestro with correct serial number. 4 pin Maestro data cable is disconnected or damaged. Check for proper connection or disconnected pins. OBD2 cable is not plugged in.
User Manual Alpine Navigation System Navigation software for the Alpine Navigation System English March 2015, ver. 1.
Table of contents 1 Warnings and safety information ............................................................................................ 5 2 Getting started ........................................................................................................................... 6 2.1 Initial set-up........................................................................................................................................ 6 2.2 Screen controls ............................................
3.1.4 Selecting a Saved Location ....................................................................................................................... 38 3.1.5 Selecting a History item ............................................................................................................................ 39 3.1.6 Entering coordinates ................................................................................................................................. 40 3.1.
4.1.9.4 Hints upon detour ............................................................................................................................................... 65 4.2 Information menu ............................................................................................................................. 66 4.2.1 Where Am I .............................................................................................................................................. 67 4.2.2 Trip Monitor ......
1 Warnings and safety information The navigation system helps you find your way to your destination with the built-in GPS receiver. Alpine Navigation System does not transmit your GPS position; others cannot track you. It is important to look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you plan and review your route before you start your journey. Plan the route before your departure and stop if you need to change the route.
2 Getting started Alpine Navigation System is optimized for in-car use. You can use it easily by tapping the screen buttons and the map with your fingertips. Easy map updates Update your maps regularly as road networks are continuously evolving all over the world. About 15% of the roads are changed each year, new ones are built, directions are altered, new speed limits are set, and many other changes are made. It is easy to keep the navigation system up-to-date. Go to alpine.naviextras.
2. Read the end-user license agreement, and tap use. 3. The Configuration Wizard starts. Tap 4. Select the language and speaker used for voice guidance messages. Later you can change it in to continue. Regional settings (page 73). Tap 5. to continue. If needed, modify the time format and unit settings. Later you can change them in Regional settings (page 78). Tap 6. if you agree with the terms of to continue. If needed, modify the default route planning options.
7. The initial set-up is now complete, tap 8. A warning appears to draw your attention to the hazards of operating, entering data into or obtaining data from the Alpine Navigation System during driving or transportsation. After reading it carefully, tap Note! . to enter the navigation view. This warning pops up every time you start Alpine Navigation System. 2.
Alpine Navigation System saves your selections and applies the new settings without confirmation as soon as you use the controls. 2.2.2 Using the cursor You can select a map location by tapping the map during navigation. When a map location is selected, the cursor ( ) appears at the selected point on the map. The location of the cursor can be used as the destination of the route or a new Alert Point. You can also search for Places around it or add this location to your saved locations.
Finalizing the keyboard entry Tap . Hiding the keyboard Tap . 2.2.4 Using touch gestures You usually need to tap the screen only once. However, some useful features can be accessed with other gestures. See the table below. Action Function Tapping and Tap and keep pressing the following buttons to reach extra functions: holding the screen Tap and hold the following button on list and menu screens to show the Navigation view: .
2.2.5 Manipulating the map If you tap the map anywhere during navigation, the map stops following the current position (the blue arrow is not locked in a fix position on the screen anymore) and control buttons appear to help you modify the map view.
Changing 2D, 3D, or 2D North up views , , Switch between the 3D perspective, 2D Heading up, and 2D North up map view modes. In Heading up mode the map is rotated so its top always points in the current driving direction. This is the default orientation in 3D map view mode. In North up mode, the map faces North. Checking the compass The direction of the compass shows North.
2.3 Navigation view The navigation view is the main screen of Alpine Navigation System that shows the planned route on a map. Alpine Navigation System works with digital maps which are not simply the computerized versions of traditional paper maps. Similarly to paper road maps, the 2D mode of digital maps shows you streets and roads. Elevation is also illustrated in color.
Number Name Description 1 Current position marker The current position is displayed as a blue arrow by default. When there is no GPS position, the current position marker is transparent and it shows your last known position. See page 16. 2 GPS position The dot near the arrow shows the GPS position as perceived by the GPS receiver. See page 16. 3 Planned route 4 Data fields The planned route is displayed as an orange line.
13 Warning road sign It shows warning for the current road (for example, dangers, sharp curves). See page 75. 14 Signpost It shows the available destinations and the road numbers. See page 18. 15 Freeway services By tapping it, you can check the details of the next few service stations (gas stations, restaurants) when traveling on a freeway. See page 20. 16 Parking around destination It appears near the destination.
2.3.2 GPS position markers When your GPS position is available, Alpine Navigation System marks your current position. By default, this marker is a blue arrow. The dot near the arrow shows the GPS position as perceived by the GPS receiver. When on-road navigation is selected, the current position marker may not show your exact GPS position and heading. If roads are near, it is aligned to the nearest road to eliminate GPS position errors, and the direction of the icon is aligned to the direction of the road.
2.3.4 Turn preview and next street When navigating a route, the top section of the Navigation view shows information about the next route event (maneuver) and the next street or the next town. There is a field in the top left corner displaying the next maneuver. Both the type of the maneuver (turn, traffic circle, exiting freeway, and so on) and its distance from the current position are displayed. A smaller icon shows the type of the second next maneuver if it is near the first one.
Enter the freeway. Exit the freeway. Board the ferry. Leave the ferry. Approaching a waypoint on the right. Approaching the destination. 2.3.6 Lane information and signposts When navigating on multi-lane roads, it is important to take the appropriate lane in order to follow the planned route. If lane information is available in the map data, Alpine Navigation System displays the lanes and their directions using small arrows at the bottom of the map.
2.3.7 Junction view If you are approaching a freeway exit or a complex intersection and the needed information exists, the map is replaced with a 3D view of the junction. The lanes you need to take are displayed with arrows. At the top of the screen, road signs show you additional information. If you want to hide the currently displayed junction and return to the Navigation view, tap the picture. Junction view can be turned off in . See page 76. 2.3.
2.3.9 Freeway services button appears at the top right corner of the Navigation When you are driving on a freeway, the view. Tap it to open a panel with the details of the next few service stations (gas stations, restaurants). Tap any of them to display the exit area on the map. You can now easily add this service station as a waypoint to your route if necessary. If you want to display other types of Places at the next few service stations, you can change the icons in . See page 76. 2.3.
2.3.11 Traffic events Road segments affected by traffic events are displayed in a different color on the map. The following icons may appear at the top right corner of the screen: Button Description It is displayed when traffic events are not received. It is displayed when traffic events are received but they do not affect the planned route. It shows the type of the next traffic event with the expected delay.
You can see the following menu options when you are navigating without a planned route: Button Function Select your destination by entering an address or its coordinate, or by selecting a Place, a Saved Location, or a Saved Route. You can also look up your recent destinations from the History. When Internet connection is available, the Online Search option can be a further help to find your destination. Build your route from one or more route points.
The More button appears on the screen to display additional features. Tap it to open the list of additional features on certain screens. Tap the Back button to return to the previous screen. You can also press and hold this button to quickly return to the Navigation view from any other screen.
3 Using the navigation By default, Alpine Navigation System calculates routes using the road network of the maps provided with the product. You can select the destination and start navigating to it right away (normal navigation) if you need a route for immediate navigation. You can also plan a route independently of your current GPS position even without GPS reception. To achieve this, you need to set a new starting point in the Multipoint Route menu.
2. Tap . You can see the input field at the top of the screen. Right next to it you can see the search area, the town around which the search is carried out. The default search area is the area where you are located. For a local search, skip the next step. 3. (optional) To search in a different area, tap the input field with the search area, and start entering the name of the new search area on the keyboard. You only need to enter a few letters to get a result.
Tap to see the list of recent destinations with a matching name or address. Tap to see the list of your saved locations with a matching name. Tap to see the list of matching addresses. to see the list of matching Place category names. Scroll the list and select one of Tap the categories. You get the list of Places in that category ordered by their distance from your current position. Tap location.
3.1.2 Selecting an address If you know at least a part of the address, this is the quickest way to select your destination. Using the same screen, you can find an address by entering the following information: The exact address, including the house number, see page 27 The center of a town, see page 29 The midpoint of a street, see page 29 An intersection, see page 30 Any of the above, starting the search with the ZIP code, see page 30. 3.1.2.
b. 2. 3. To open the list, tap , and select the town or ZIP code. Enter the street name and the house number or crossing street by performing the following steps: a. Start entering the street name on the keyboard. The names that match the string appear in a list. b. Tap c. Enter the house number or crossing street on the keyboard. (To enter letters, tap d. Tap the selected address to finish the address search. to open the list of results. Select the street from the list. .
3.1.2.2 Selecting a town center The town center is not the geometric center of the town but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection and in larger towns, it is one of the important intersections. 1. Press the navigation hardkey button to access the Navigation menu. 2. Go to 3. Select a new town or ZIP code by performing the following steps: and modify the country as described earlier (page 27), if necessary. a.
5. Instead of entering the house number, tap selected as the destination. . The midpoint of the street is 3.1.2.4 Selecting an intersection in a town To navigate to an intersection, perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2. Go to 3. Start entering the street name on the keyboard. The names that match the string appear in a list. 4. Tap 5.
2. Tap . 3. Tap 4. Tap 5. Continue the search as described previously (page 27). to open the numeric keypad and start entering the ZIP code. to open the list of results. Select the ZIP code from the list. 3.1.3 Selecting a Place of Interest You can search for Places of Interest (Places) in the menu.
3.1.3.1 Using Quick search categories The Quick search feature helps you quickly find the most frequently selected types of Places. Perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2. Tap . The following Quick search categories appear: : If a planned route exists, gas stations are searched along the route. : If a planned route exists, accommodation is searched around the destination.
. To filter the list of results by providers, tap on the right side of the screen. and then the provider logo 5. (optional) If needed, tap to further filter the list of results. 6. Browse the list and tap one of the list items. 7. The route is calculated and the map appears showing the entire route, where you can check route information and route alternatives. Tap to modify the route parameters, or tap to start your journey. 3.1.3.
Tap to search for a place within a selected town. (The result list is ordered by the distance from the center of the selected town.) 4. (optional) If you have selected 5. Select one of the main Place categories (for example, Accommodation), then browse the subcategories (for example, Hotel or Motel) to find your destination. 6. You can turn the Category View off at any level to list all Places around the selected location or along the route. 7.
Tap to reorder the list. To filter the list of results by providers, tap screen. and then the provider logo on the right side of the 8. Browse the list and tap one of the list items. A full screen map appears with the selected point in the middle. 9. The process continues the same way as in case of any other search for Places. See page 32. 3.1.3.
4. (optional) If you have selected , select the town to search in. You can search for the name of a Place in all categories by performing the following steps: 1. Tap the categories. . Using the keyboard, start entering the name of the Place or browse in 2. After entering a few letters, tap to open the list of Places or Place categories with names containing the entered character sequence. 3. Browse the list, if necessary, and tap the desired list item.
3.1.3.4 Finding help nearby To quickly search for nearby assistance, perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2. Tap and . Places in the following pre-set search categories can be searched for around the current position (or around the last known position if the current position is not available): : Car repair and roadside assistance services : Medical and emergency services : Police stations : Gas stations 3.
3.1.4 Selecting a Saved Location To select a location that you have already saved (page 53), perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2. Tap 3. The list of Saved Locations is displayed. It contains two pre-set categories: Home and Work. 4. Tap the location that you want to set as your destination. If necessary, browse the list to see more results. 5. (optional) If needed, tap the Saved Locations or delete any of them. 6.
3.1.5 Selecting a History item The destinations that you have used earlier appear in the History list. Smart History offers these locations from your previous destinations, using parameters like the current time of day, the day of week, and the current location. The more you use the navigation software, the better it can guess your desired destination. To select a History item, perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2.
3.1.6 Entering coordinates To select a destination by entering its coordinates, perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2. Tap 3. You can enter the latitude and longitude values in any of the following formats: decimal degrees, . degrees and decimal minutes, or degrees, minutes and decimal seconds. Tap . (optional) If necessary, tap coordinate in UTM format. then and enter the Tip! 4.
3.1.7 Selecting a location on the map To select a map location, perform the following steps: 1. Locate your destination on the map. Move and scale the map as necessary. 2. Tap the location that you want to select as your destination. The cursor ( 3. (optional) If needed, tap this location. Tip! ) appears there. to list the Places near the selected point or to save If you already have a planned route, tap add the selected location to your route. and to 4.
3.1.8 Planning a Multipoint Route To build your route destination-by-destination, perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2. Tap 3. There is only one line in the list of route points, the starting point of the route, which is normally the current GPS position. 4. Tap 5. The New Route to... screen appears, where you can select the destination of the route the same way as described in the previous sections. 6.
8. (optional) Tap also delete all the destinations. to optimize the whole route or the order of waypoints. You can 9. When you have added all the route points, tap automatically calculated. and the planned route is 3.2 Checking Route Information and Alternatives To get a map overview of the planned route and check different parameters of the planned route, perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2. In the Navigation menu, tap 3.
Tap to list route alternatives and select the most suitable route for you. on the Route Summary screen to carry out additional actions, for example edit Tap your route preferences or display the itinerary. 3.3 Checking Traffic Events Offline statistical traffic information (historical speed information or traffic patterns) can be taken into account in the route calculation based on the time of day and the day of week if suitable data can be found on the device.
2. If there is at least one significant event on the planned route, a description is displayed about the to see the list of all events. next event. Tap 3. Tap any of the list items to see its details and to display the affected road segment in its full length on the map. To display real-time traffic information on the map, perform the following steps: 1. On the Navigation view, tap the traffic icon (for example, screen and tap 2. ) to open the Traffic summary .
Tap to display historical traffic information. A 2D map is displayed with road segments colored by the likely density of the traffic in the given period. The information relevant for the current period is shown when you open the screen. If necessary, you can browse the map for a better view of certain road segments. Modify the day of week and the time of day to see the desired period. 3.4 Editing the route When navigation has already started, there are several ways to modify the planned route.
3.4.1 Setting a new starting point For normal navigation, all routes are calculated from the current position. You can pause navigation to check future routes, simulate them or see their length in time and distance. Then you can set the starting point of the route to a location other than the current GPS position. 1. Press the navigation hardkey button to access the Navigation menu. 2. In the Navigation menu, tap 3.
6. Tap to continue. The map returns with a transparent position marker (showing that there is no GPS reception). If a planned route already exists, it is now recalculated starting from the selected location. 7. To return to normal navigation, tap . 3.4.2 Adding an additional destination If you already have a planned route and you select a new destination as described in the above sections, the route to the previous destination is deleted and a new route is calculated.
3.4.3 Modifying the list of destinations To edit your route, perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2. In the Navigation menu, tap . You have the following options on this screen: Tap route. Tap the name of the intermediate destination to move it up or down in the list, to save the location, or to delete it from the list.
3. Type in a name and tap . 4. The route is saved and it is available in in the Navigation menu. By selecting a previously saved route, Alpine Navigation System recalculates the route using the saved destination and/or the waypoints. 3.4.
3.4.6 Selecting a route alternative when planning the route To select from different route alternatives or change the route planning method after you have selected a new destination, perform the following steps: 1. Select a destination as explained earlier, and go to the route confirmation screen. 2. Tap 3. You can see the basic details of route alternatives. Tap any of them to see it on the map. 4. To view more suggestions, tap with different route planning methods. 5.
3.4.7 Selecting a route alternative for an existing route To recalculate the planned route with a different route planning method and to compare different route alternatives, perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2. You can access the list of route alternatives from the Navigation menu in one of the following ways: 3. Tap and Tap and . . You can see the basic details of a few route alternatives.
3.5 Saving a location To add any location to the saved locations (the list of frequently used destinations), perform the following steps: 1. Select a destination as described before. It can be an address, a Place, any location on the map, a previously used destination from History, and so on. 2. When the map appears with the route, tap 3. Tap 4. (optional) Using the keyboard, you can change the name offered for the Saved Location. 5. Tap . . to save the location.
3.5.1 Editing a Saved Location To edit a location that you have already added as a Saved Location, perform the following steps: 1. Press the navigation hardkey button, and tap 2. The list of Saved Locations is displayed. 3. Tap 4. Tap the location you want to edit, tap . and the keyboard, then tap . and enter the name of the location on . In Saved Locations, Home and Work cannot be renamed. To change your home or work Note! 5. location, tap change. Tap or , and confirm the address .
The warning for road safety cameras is disabled when you are in a country where road safety camera warning is prohibited. However, you must make sure that using this feature is Note! legal in the country where you intend to use it. 1. Return to the Navigation view, and select the Alert Point. The red cursor ( ) appears there. 2. Tap 3. Scroll down the list and tap 4.
3.7 Running a Simulation To run a simulated navigation that demonstrates the planned route, perform the following steps: 1. Press the navigation hardkey button to access the Navigation menu. 2. In the Navigation menu, tap 3. Tap 4. Tap . The simulation starts from the starting point of the route and leads you through the whole planned route using a realistic speed. . .
5. Tap : Tap to increase the speed of the simulation to 4, 8 or 16 times faster. Tap again to return to normal speed. to stop the simulation. 3.8 Off-road navigation When first started, Alpine Navigation System calculates routes using the road network of the maps provided with the product. If you want to disregard roads during navigation, you can switch to off-road mode, for example when driving in a desert. 3.8.
3.8.3 Navigating in off-road mode The real difference between on-road and off-road modes is the navigation itself. When you are on the Navigation view with an off-road route: Your position and heading is not aligned to the nearest road. There is no turn-by-turn navigation, just a recommended direction. You can see an orange line drawn between your current position and the next destination to reach.
Do not switch off your navigation system during the following process. Caution! Do not remove the USB storage device until the preparation process is completed. 3. 4. a. Start the navigation system while your vehicle is parked. b. Insert the empty USB storage device into the USB port of your navigation system. c. Press the navigation hardkey button, and in the Navigation Menu, tap . d. Tap Yes on the confirmation screen.
4 Reference guide The following sections describe the different concepts and menu screens of Alpine Navigation System. 4.1 Concepts The following sections describe and explain navigation-related concepts. 4.1.1 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation.
Audio warning: beeps are played (if the voice guidance language that you selected is a natural voice) or the type of the alert can be announced (TTS voice) while you are approaching one of these points, and an extra alert warns you if you exceed the given speed limit while approaching. Visual warning: the type of the Alert Point, its distance and the related speed limit appear on the Navigation view while you are approaching one of these locations.
While driving without a planned route: Smart Zoom zooms in if you drive slowly and zooms out when you drive at a high speed. 4.1.6 Speed limit warning Maps may contain information about the speed limits of the road segments. Alpine Navigation System is able to warn you if you exceed the current limit. This information may not be available for your region, or may not be fully correct for all roads on the map. The maximum speed set in the vehicle profile (page 70) is also used for this warning.
TMC is a specific application of the FM Radio Data System (RDS) used for broadcasting real-time traffic and weather information. If public Traffic data is broadcast at your location, Alpine Navigation System automatically searches the FM radio stations for TMC data, and the decoded information is immediately used in route planning. Note! TMC is not a global service. It may not be available in your country or region. Ask your local dealer for coverage details.
You can ignore this message and keep the original route by tapping check the suggested route by tapping or you can . By tapping the plus/minus signs, you can increase or decrease the distance to avoid on the highway. . You can accept the recommended detour by tapping 4.1.9.2 Real-time alternative routes Alpine Navigation System may offer an alternative route on normal roads in case of a traffic jam. The possible alternative route window appears and shows the length and duration of the detour.
4.1.9.3 Parking around destination If you leave the planned route by exiting a freeway, Alpine Navigation System tries to guess the reason for making a detour. By tapping , you can open a top-down map with the recommended parking Places around the destination. By tapping the arrows on the sides, you can switch between the recommended parking facilities. By tapping destination.
4.2 Information menu The Information menu provides various additional functions. It can be found in the Navigation menu. You need an Internet connection via your cell phone to access online services, like parking and weather information. Button Description Shows information on the current position (latitude, longitude, nearest town, next crossing street, and so on) or the last known position if GPS reception is not available. See page 67. Offers assistance near your current position. See page 37.
4.2.1 Where Am I This screen contains information about the current position (or about the last known position if GPS reception is not available). You can access it the following two ways: By going to the Navigation menu and tapping By tapping the current street name if it is displayed below the current position marker on the map. and .
4.2.2 Trip Monitor Trip Monitor logs information about your route. You can record a new trip by tapping By tapping and stop it by tapping . on the Trip Monitor screen, you can select the following options: Button Function By selecting a recorded trip, you can delete, rename, or change the color of the recorded route. You can access the Trip Monitor Settings, where you can enable saving the trip logs automatically or you can save the trip logs manually. See page 81.
The Setup menu provides the following options: Button Function Select the type of vehicle you are driving, the road types used in route planning, and the route planning method. Adjust the different sound volumes. Enable and set up warnings for speed limit, Alert Points (such as speed cameras), and road signs. Fine-tune the appearance of the Navigation view or adjust how the software helps you navigate with different kinds of route-related information on the Navigation view.
4.3.1 Route preferences The following settings determine how routes are calculated: Button Function Set the type of vehicle you want to use to navigate the route. Based on this setting, some of the road types can be excluded from the route, or some of the restrictions may not be taken into account in route calculation. See page 70. Edit the parameters of the vehicle profile. See page 70. Optimize the route calculation for different situations and vehicle types by changing the planning method. See page 72.
Maneuver restrictions and one-way streets are taken into account when planning a route. Roads are used only if access for taxis is allowed. Private roads, resident-only roads and walkways are excluded from routes. Maneuver restrictions and one-way streets are taken into account when planning a route. Roads are used only if access for trucks is allowed. Private roads, resident-only roads and walkways are excluded from routes.
4.3.1.2 Route Planning Method types You can select from the following route planning method types: Button Description Gives a quick route if you can travel at or near the speed limit on all roads. Usually, the best selection for fast and normal cars. Results in a route with fewer turns and no difficult maneuvers. With this option, you can make Alpine Navigation System take, for example, the freeway instead of a series of smaller roads or streets. Gives a short route to minimize the travel distance.
Charge roads are pay roads where you can purchase a pass or vignette to use the road for a longer period of time. They can be enabled or disabled separately from toll roads. Per-use toll roads are pay roads where there is a per-use charge in the routes by default. If you disable toll roads, Alpine Navigation System plans the best toll-free route. Alpine Navigation System includes ferries in a planned route by default.
You have the following options for each sound type: Button Volume slider Function Adjust the volume of the related sound. Mute the related sound. The slider becomes inactive. Tap again to re-enable it. Button Function Disable verbal instructions. This function is enabled by default. Choose from the following options: Announce the street names in the native language area of the selected voice guidance language. Announce the road numbers only. Announce the maneuvers only.
Allow announcing system messages. 4.3.3 Warnings You can enable and modify the following settings: Button Description Alpine Navigation System is able to warn you if you exceed the current speed limit. This information may not be available in your region, or may not be fully correct for all roads on the map. The maximum speed set in the vehicle profile is also used for this warning. Alpine Navigation System alerts you if you exceed the pre-set value even if the legal speed limit is higher.
Tap it to receive a warning when approaching a road safety camera or other Alert Points like school zones or railroad crossings. You must make sure that using this feature is legal in the country where you intend to use it. You can set the warning type for the different Alert Point categories (alert types) individually.
You can modify the following settings: Button Function Adjust the basic zoom and tilt levels to your needs. Three levels are available. Switch between daytime and night color modes or let the software switch between the two modes automatically a few minutes before sunrise and a few minutes after sunset. Select the color scheme used in daytime mode. Daytime colors are bright and similar to paper road maps. Select the color scheme used in night mode.
Zoom out and show an overview of the surrounding area if the next maneuver is far and you are driving on a freeway. When you get close to the event, the normal map view returns. Whenever adequate information is available, lane information similar to the real ones on road signs above the road is displayed at the top of the map. Tap it to turn this feature on or off.
It shows the current voice guidance profile. Tap it to select a new profile from the list of available languages and speakers. Tap any of these to hear a sample voice prompt. Just tap when you have selected the new spoken language. Different voice profiles are capable of different levels of service: Natural Voice (street names not announced): These pre-recorded sounds can only tell you basic information about turns and distances.
4.3.7 Traffic You can modify the following settings: Button Function Enable or disable the Traffic reception that can receive real-time traffic information. The rest of the buttons below are all related to the Traffic function and are available only if the receiver is enabled. Tap it if you want to use online traffic information to avoid road blocks or unexpected traffic jams.
4.3.8 Trip Monitor Trip logs contain useful information about your recorded trips. You can enable and modify the following settings: Button Description Trip monitor can record statistical data of your trips. If you need these logs later, you can let the application save them automatically for you. Track logs, the sequence of the positions given by the GPS receiver, can be saved together with trip logs. They can later be displayed on the map.
5 End-user license agreement 0. Definitions The following terms shall have the meaning defined hereunder in this agreement when used with capital letters. The text of this agreement may also contain further defined terms. “Agreement” means this End User Licence Agreement (EULA) containing the terms and conditions of use of the Software, Databases and Services by You as the end user.
term is defined at 48 C.F.R (“FAR”) 2.101 and that all use of the Navigation Product is subject to this Agreement. 3 Applicable law and venue 3.1 This Agreement will be governed by the laws of the country where the Licensor has its statutory seat or in the absence of such incorporation where it has its central administration (“country of residence”) without regard to such country’s choice of law provisions. 3.2 The courts of the country of residence specified in Section 3.1.
5.2 Intellectual property rights of Licensor, the Software Owner or other rightholders extend to the whole Navigation Product and to its parts separately as well. 5.3 The owner(s) of the copyrights of the Database(s) is (are) the Licensor, or natural person(s) or corporate business entity(ies) (referred to as: “Database Owner”) who supply them.
store, to transfer or to distribute these data or contents or to disclose them in full or in part to the public in any format or to download them from the Navigation Product. 8. No warranty, limitation of liability 8.
Safety (e.g. speed) cameras are provided for informational purposes only and may not be used to encourage, facilitate or support the violation of any laws. Furthermore some countries prohibit the display or use of such features. Compliance with country specific laws and any usage or reliance on the information by user shall be at the User's own risk and sole responsibility. 8.7 Database and Services provided by third parties.
10.4 Licensor hereby informs the User, that if it accesses the Internet through mobile data service while abroad or otherwise roaming another mobile network the transmission of such data may result in special roaming charges. To avoid such charges it is the responsibility of the User to disable mobile data services while roaming or to turn off the data collection functions of the Navigation Product. 11. Auxiliary Terms for Services 11.1 For online Services the following auxiliary terms shall also apply.
11.7. Community Services. Some Connected Services may be based on data and information uploaded by participating individuals (Users or other persons) or a Database created and maintained by a group of such individuals. Such data may not come from a trusted source and may also be intentionally false or misleading, as Licensor or Software Owner does not have any means to control or verify the credibility or accuracy of such data or the individuals providing the data.
6 Copyright note The product and the information contained herein are subject to change without prior notification. This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Alpine Electronics, Inc. © 2015 – Alpine Electronics, Inc. All rights reserved. © 2015 – NNG Kft. All rights reserved. Map data: © 1987 - 2015 HERE. All rights reserved. See http://corporate.
HERE Maps Update 68-29530Z26-A (Y_240x180)
Register now and we will keep you informed of map updates and special offers. To register, complete and return this card or visit here.com Please tick the box 'Email ok' if you would like to receive information by email. here.com@ 2014 HERE All rights reserved. Part No. T1000-22235.
Model No.
NO POSTAGE NECESSARY IF MAILED IN THE UNITED STATES BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO.
Thank you for choosing Alpine for your car audio equipment needs. Our goal is to produce the best audio/video/navigation products in the world and hope your expectations are met. Please take a moment to protect your purchase by registering your product now at the following address: www.alpine-usa.com/registration. You will be informed of product and software updates (if applicable), special promotions, and news about Alpine.
To customers/Hinweis an Kunden/A l'attention de l'utilisateur/lnformacion para los clientes/ lnformazioni peri clienti/Till kunder/ Aan klanten/AnH Knr.teHTOB/Do klientow ~WARNING INSTALL ONLY INTO SPECIFIED CAR English On ly inst all this product accordin g to the specific installation instructions and on ly into recommended automobiles. Failure to install according to these instructions may result in fi re, accident, serious injury or death or damage t o the product.
Notification Congratulations on your purchase of an Alpine Restyle System! Alpine Restyle products are covered under a 3-year Manufacturer's limited warranty from the date of the first consumer purchase. PLEASE NOTE THAT THIS PACKAGE INSERT IS NOT THE LIMITED WARRANTY ITSELF. To read and understand the Limited Warranty, please see the Limited Warranty which is printed in the owner's manual and also may be found at alpine-usa.com/support. We encourage you to register this product on Alpine's website at www.
GARANTIE LIMITEE Fidele a son engagement de ne fournir que des produits de qua lite, ALPINE ELECTRONICS OF AMERICA, INC.(« Alpine») est heureuse de vous offrir cette garantie. Nous vous suggerons dele lire attentivement et en entier. Si vous avez Ia moindre question, veuillez contacter l'un de nos concessionnaires ou appeler directement Alpine aux numeros listes ci-dessous.
LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. ("Alpine"), is dedicated to quality craftsmanship and is pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below. • PRODUCTS COVERED: @You must supply proof of your purchase ofthe product. This Warranty covers Car Audio Products and Related Accessories ("the product").