Owner's Manual

80-EN
iPhone, Smartphone, etc.
The output of your electronic device will be mirrored on this unit
through the HDMI connector. Control from this unit is not possible.
• The electronic device must possess an HDMI output interface.
• Not all devices with an HDMI output interface can be recognised by
this unit.
• Use only the Alpine Special HDMI connection cable.
1 Press the (AUDIO) button to select HDMI mode.
The display shows the HDMI mode screen.
• You can select and change the source in the Menu screen (page 22)
or Favorite screen (page 25).
• For your safety, video is not displayed and only audio can be heard
while driving.
2 In HDMI player mode, the screen of the device displays
the content of electronic equipment by mirror image.
You can select Display Mode.
For details, see “Switching Display Modes (During Video File Play
Back)” (page 59).
• You cannot operate them while driving.
Switching the source when two HDMI devices are connected
You can switch the source only when you have connected the HDMI
selector and “Setting the HDMI Selector On/Off ” (page 50) is set to
“On.”
Screen example when the HDMI Setup is “HDMI 1”
To uc h [] (HDMI 2).
The HDMI source changes to HDMI 2, and the Function button
changes to [] (HDMI 1).
Each time you touch [] (HDMI 1)* or [] (HDMI 2), the HDMI
source changes.
* When HDMI Setup is “DVD,” the Function button is changed to []
(DVD).
HDMI Operation
WARNING
It is dangerous for the driver to watch the HDMI image
while driving the vehicle. The driver may be distracted
from looking ahead and an accident may occur.
Install the unit correctly so that the driver cannot watch
the HDMI image unless the vehicle is stopped and the
emergency brake is applied.
If the unit is not installed correctly, the driver will be able
to watch the HDMI image while driving the vehicle and
may be distracted causing an accident. The driver or other
people may be severely injured.