Owner's Manual

73
4.3.1.1 Vehicle profile
You can select the following vehicle types:
Button Description
Maneuver restrictions and directional constraints are taken into account when
planning a route.
Roads are used only if access for cars is allowed.
Private roads and resident-only roads are used only if they are inevitable to
reach the destination.
Walkways are excluded from routes.
All maneuvers are available in intersections.
One-way streets are taken into account so that driving in the opposite direction
is allowed at low speed.
A private road is used only if the destination is there.
Walkways are excluded from routes.
Maneuver restrictions and one-way streets are taken into account when
planning a route.
Roads are used only if access for buses is allowed.
Private roads, resident-only roads and walkways are excluded from routes.
Maneuver restrictions and one-way streets are taken into account when
planning a route.
Roads are used only if access for taxis is allowed.
Private roads, resident-only roads and walkways are excluded from routes.
Maneuver restrictions and one-way streets are taken into account when
planning a route.
Roads are used only if access for trucks is allowed.
Private roads, resident-only roads and walkways are excluded from routes.
U-turns are excluded from routes (turning back on a divided road is not
considered as a U-turn).
If the map contains data on dimension, weight and freight restrictions, they can
also be taken into account when planning a route.
Creating a profile makes it possible to set up vehicle parameters used in route planning. You can
have several profiles for the same vehicle.
To add a new vehicle profile, perform the following steps:
1. Tap
, browse the list of vehicles, and tap .
2. Select the vehicle type and set the parameters below. Depending on the vehicle type, some
parameters may not be available in the list.
You can set the following parameters:
Button Function