Owner's Manual

16-EN
Location of Controls
For X208U/INE-W977HD
For X209D
Microphone (X208U/INE-W977HD only)
Used for Hands-free or Voice Control modes.
(AUDIO) button
Displays the Audio/Visual screen. If the Audio/Visual screen is
already displayed, changes the source.
or VOICE button
Depending on the connected smartphone, press to recall Siri
function or voice recognition mode.
/ or / (UP/DOWN) button
Press to adjust the volume.
(Favorite) button
Recalls the Favorite screen.
• Press and hold this button for at least 2 seconds to switch to
the iDataLink mode screen. (When connected to the optional
iDataLink module.)
MENU/ (Power Off) button
Recalls the Menu screen.
Press and hold this button for at least 5 seconds to turn the
power off.
/ button
Press to seek down/up a station in radio mode or down/up a
track, chapter, etc., in other audio/visual sources.
RESET switch
The system of this unit is reset.
(NAV) button
Recalls the navigation map screen.
Press again to switch to Navigation menu screen.
Press and hold this button for at least 2 seconds to change to Go
Home route screen. (If Home is not set yet, it will change to the
Home setting screen.)
When the Apple CarPlay or Android Auto is used, the operation
may differ. Press
(NAV) to change the map screen between
smartphone and this unit.
For details of navigation operations, refer to “Navigation System
OM” in the website at http://www.alpine-usa.com.
Remote Sensor
Point the remote control transmitter towards the remote sensor
within a range of 2 meters.
(Eject) button (X209D only)
Ejects a disc.
Getting Started
Controllable with Remote Control
This unit can be controlled with an optional Alpine remote control.
For details, consult your Alpine dealer. Point the optional remote
control transmitter at the remote control sensor.
About the button descriptions used in this Owner’s
Manual
The buttons found on the face of the unit are expressed in bold
(e.g. MENU). The buttons found on the touch-screen display are
shown in bold within brackets, [ ] (e.g. []).