Owner's Manual

46-EN
HDMI Setup
[HDMI] is selected on the Source Setup Menu screen in step 1. See
“Source Setup” (page 43).
You can set the name of an external device connected via HDMI.
Setting item:
HDMI
Setting contents:
HDMI (HDMI 1*) (Initial setting) / DVD
* When the HDMI selector is set to “On,” “HDMI 1” is displayed in the
Setting contents. For details on setting the HDMI selector, see “Setting
the HDMI Selector On/Off” (page 50).
• The initial setting of X208U/INE-W977HD is “HDMI”, and initial
setting of X209D is “DVD”.
Setting the Bluetooth Pandora®
[Bluetooth Pandora] is selected on the Source Setup Menu screen in
step 1. See “Source Setup” (page 43).
To use Bluetooth Pandora, set the Bluetooth Pandora setting to “On.”
Setting item:
Bluetooth Pandora
Setting contents:
Off / On (Initial Setting)
• When “On” is set, the Bluetooth Pandora® source is displayed on the
Menu screen.
• When the current source is Bluetooth Pandora, this setting cannot be
adjusted.
Apple CarPlay Setup
[Apple CarPlay] is selected on the Sources Setup Menu in step 1. See
“Source Setup” (page 43).
Before connecting an iPhone 5 or later, turn on this item to use the
Apple CarPlay function.
Setting item:
Apple CarPlay
Setting contents:
On (Initial setting) / Off
• This setting is invalid for music playing of iPhone 4S and iPod.
[System] is selected on the Setup main screen in step 3. See “Setup
Operation” (page 30).
System Setup Menu screen
<Setting items>
*1 When you select “Camera Selector” in “Camera Select”, the setting item
is different. For details, see “Setting Multi Camera to On/Off ”
(page 49).
*2 When Camera Select is set to “Off,” you cannot select this item.
*3 You can select this item only when Camera Select is “Front” or “Rear.”
*4 You can select this item only when Camera Select is “Rear.”
*5 Set this setting after closing the Alpine TuneIt App and Alpine Connect
App.
*6 Set this setting after closing the Alpine TuneIt App.
*7 Set this setting after closing the Alpine Connect App.
1 Select the desired item.
2 To switch the setting, touch [], [], [], [], or mark the
checkboxes “Off” ( ) or “On” ( ).
• If “ ” appears, there is a further hierarchy. Touch the desired
item.
HDMI
(HDMI 1):
Set when a smartphone is connected via HDMI.
DVD: Set when an external DVD player is connected.
On: Set before an iPhone 5 or later is connected. Apple
CarPlay can be used but all apps may not be available on
your device.
Off: Set when you want to use the iPod source, etc., of the
connected iPhone 5 or later.
System Setup
Camera*
1
Camera Select
Camera Signal*
2
Guide Adjustment*
3
Camera Interrupt (Power Mode)*
4
Factory System Setup
USB/iPod / SiriusXM
Default Vehicle Screen
Maestro Module
Rear Seat Entertainment
Rear Seat Entertainment
Remote Sensor
External Accessories
External Audio Processor
HDMI selector
External Accessory Ctrl
Smartphone Apps
Connectivity Setting*
5
Alpine TuneIt App*
6
Alpine Connect*
7
The following steps 1 to 3 are common to each “Setting
item” of System Setup. See each section for details.